Document Type

Conference Proceeding

Conference

ASME 2003 International Mechanical Engineering Congress and Exposition

Publication Date

2003

DOI

10.1115/IMECE2003-43198

City

Washington, DC

Abstract

Recent work on ferromagnetic shape memory nickel-manganese-gallium (Ni-Mn-Ga) has demonstrated several characteristics which make this material attractive as an active element for the next generation of intelligent transducers. Alloys of martensitic Ni-Mn-Ga can strain up to 6% as a result of the rotation of twin variants and associated twin boundary motion which occur in these materials in response to magnetic fields. The magnetic actuation holds promise in transducer design because it can lead to enhanced frequency response compared with shape memory alloys with comparable strains. In this paper, we report on experimental measurements collected from a Ni50 Mn28.7 Ga21.3 sample which has been tested in a solenoid transducer by means of a novel drive configuration consisting of a collinear uniaxial field-uniaxial stress pair. We have observed that the elastic modulus of a Ni-Mn-Ga sample driven in these conditions changes substantially in response to varying bias field. In this paper, we further investigate the dependence of the elastic modulus on ac field intensity and mechanical load as well as bias field. Quasistatic, white noise, and swept-sine excitations were employed to examine the behavior of Ni50 Mn28.7 Ga21.3 driven under various combinations of magnetic fields and mechanical loads. Mechanically free quasi-static tests demonstrate reversible strains of 6300 με which are consistent with prior measurements on samples with similar composition near the Heusler stoichiometry. Dynamic measurements reveal a significant stiffness increase, of up to 209%, with dc bias field. This frequency shift or ΔE effect is shown to originate in the Ni-Mn-Ga sample and is believed to stem from the reorientation of twin variants in response to varying dc field. These results might facilitate a new class of solenoid-based Ni-Mn-Ga transducers for tunable vibration absorber applications, and lay the ground work for developing methods and criteria for the implementation of broadband Ni-Mn-Ga transducer technologies.

Comments

This article is from ASME 2003 International Mechanical Engineering Congress and Exposition 68 (2003): pp. 317-324, doi:10.1115/IMECE2003-43198

http://dx.doi.org/10.1115/IMECE2003-43198

Copyright Owner

American Society of Mechanical Engineers

Language

en

Share

Article Location

 
COinS