Analysis of interdiffusion of Dy, Nd, and Pr in Mg

Thumbnail Image
Date
2001-11-01
Authors
Xu, Y.
Chumbley, L.
Weigelt, G.
Laabs, F.
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
Authors
Person
Research Projects
Organizational Units
Organizational Unit
Materials Science and Engineering
Materials engineers create new materials and improve existing materials. Everything is limited by the materials that are used to produce it. Materials engineers understand the relationship between the properties of a material and its internal structure — from the macro level down to the atomic level. The better the materials, the better the end result — it’s as simple as that.
Journal Issue
Is Version Of
Versions
Series
Department
Materials Science and Engineering
Abstract

The diffusion characteristics of Mg–rare-earth diffusion couples were studied. Cylinders of pure Mg and rare earth (Dy, Nd, and Pr) were abutted and annealed at 500 °C for 100 h or 300 h. Point-by-point composition profiles were collected starting in pure Mg, across the diffusion zone, and ending in the pure rare earth, using energy dispersive x-ray spectroscopy with a scanning electron microscope. The intermetallic phases that resulted due to diffusion were identified and compared to existing phase diagrams, for which the data is limited. For each diffusion couple, a plot of concentration versus distance perpendicular to the original plane of contact was obtained and analyzed using the Boltzman–Matano method. The interdiffusion coefficients for each set of phases were then calculated. The results show that diffusion through the intermetallic phases is much slower than is expected in a solid solution.

Comments

This article is from Journal of Materials Research 16 (2001): 3287-3292, doi: 10.1557/JMR.2001.0452. Posted with permission.

Description
Keywords
Citation
DOI
Subject Categories
Copyright
Mon Jan 01 00:00:00 UTC 2001
Collections