Submissions from 2019
Algorithmic aspects and finite element solutions for advanced phase field approach to martensitic phase transformation under large strains, Hamed Babaei, Anup Basak, and Valery I. Levitas
Development of an elliptic blending lag k — ω model, Rajarshi Biswas, Paul A. Durbin, and Gorazd Medic
NDE in-process for metal parts fabricated using powder based additive manufacturing, Leonard J. Bond, Lucas W. Koester, and Hossein Taheri
Kinetics of the γ–δ phase transition in energetic nitramine-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine, P. Bowlan, B. F. Henson, L. Smilowitz, Valery I. Levitas, N. Suvorova, and D. Oschwald
Slip of shuffle screw dislocations through tilt grain boundaries in silicon, Hao Chen, Valery Levitas, and Liming Xiong
High-Pressure Phase Transformations under Severe Plastic Deformation by Torsion in Rotational Anvils, Valery I. Levitas
Large-eddy simulation of turbulent flow over a parametric set of bumps, Racheet Matai and Paul A. Durbin
Submissions from 2018
Phase-field approach for stress- and temperature-induced phase transformations that satisfies lattice instability conditions. Part 2. simulations of phase transformations Si I↔↔ Si II, Hamed Babaei and Valery I. Levitas
Nanoscale multiphase phase field approach for stress- and temperature-induced martensitic phase transformations with interfacial stresses at finite strains, Anup Basak and Valery I. Levitas
Model-Assisted Approach for Probability of Detection (POD) in High-Temperature Ultrasonic NDE Using Low-Temperature Signals, Prathamesh N. Bilgunde and Leonard J. Bond
Resonance analysis of a high temperature piezoelectric disc for sensitivity characterization, Prathamesh N. Bilgunde and Leonard J. Bond
Instability waves and transition in adverse-pressure-gradient boundary layers, Rikhi Bose, Tamer A. Zaki, and Paul A. Durbin
Thermodynamic and kinetic analysis of the melt spinning process of Fe-6.5 wt.% Si alloy, Senlin Cui, Gaoyuan Ouyang, Tao Ma, Chad R. Macziewski, Valery I. Levitas, Lin Zhou, Matthew J. Kramer, and Jun Cui
Turbulence Closure Models for Computational Fluid Dynamics, Paul A. Durbin
Microscale phase field modeling of the martensitic transformation during cyclic loading of NiTi single crystal, S. Ehsan Esfahani, Iman Ghamarian, Valery I. Levitas, and Peter Collins
Coupled strain-induced alpha to omega phase transformation and plastic flow in zirconium under high pressure torsion in a rotational diamond anvil cell, Biao Feng, Valery I. Levitas, and Mehdi Kamrani
FEM modeling of plastic flow and strain-induced phase transformation in BN under high pressure and large shear in a rotational diamond anvil cell, Biao Feng, Valery I. Levitas, and Wanghui Li
Imaging stress and magnetism at high pressures using a nanoscale quantum sensor, S. Hsieh, P. Bhattacharyya, C. Zu, T. Mittiga, T. J. Smart, F. Machado, B. Kobrin, T. O. Hohn, N. Z. Rui, Mehdi Kamrani, S. Chatterjee, S. Choi, M. Zaletel, V. V. Struzhkin, J. E. Moore, Valery I. Levitas, R. Jeanloz, and N. Y. Yao
Simulations of rib-roughened rough-to-smooth turbulent channel flows, Umair Ismail, Tamer A. Zaki, and Paul A. Durbin
Nanoscale mechanisms for high-pressure mechanochemistry: a phase field study, Mahdi Javanbakht and Valery I. Levitas
High pressure phase transformations revisited, Valery I. Levitas
Phase field approach for stress- and temperature-induced phase transformations that satisfies lattice instability conditions. Part I. general theory, Valery I. Levitas
Phase Transitions and Their Interaction with Dislocations in Silicon, Valery I. Levitas, Hao Chen, and Liming Xiong
Thermodynamically consistent and scale-dependent phase field approach for crack propagation allowing for surface stresses, Valery I. Levitas, Hossein Jafarzadeh, Gholam Hossein Farrahi, and Mahdi Javanbakht
SAT-based Explicit LTLf Satisfiability Checking, Jianwen Li, Kristin Y. Rozier, Geguang Pu, Yueling Zhang, and Moshe Y. Vardi
Wear evolution and stress distribution of single CBN superabrasive grain in high-speed grinding, Jingwei Wang, Tianyu Yu, Wenfeng Ding, Yucan Fu, and Ashraf F. Bastawros
Morphology and stress evolution during the initial stages of intergranular corrosion of X70 steel, Denizhan Yavas, Abdullah Alshehri, Pratyush Mishra, Pranav Shrotriya, Ashraf F. Bastawros, and Kurt R. Hebert
Nanoindentation study of corrosion-induced grain boundary degradation in a pipeline steel, Denizhan Yavas, Pratyush Mishra, Abdullah Alshehri, Pranav Shrotriya, Kurt R. Hebert, and Ashraf F. Bastawros
Lattice Instability during Solid-Solid Structural Transformations under a General Applied Stress Tensor: Example of Si I → Si II with Metallization, Nikolai A. Zarkevich, Hao Chen, Valery I. Levitas, and Duane D. Johnson
Submissions from 2017
Perspectives on the Phenomenology and Modeling of Boundary Layer Transition, Paul A. Durbin
Pressure Self-focusing Effect and Novel Methods for Increasing the Maximum Pressure in Traditional and Rotational Diamond Anvil Cells, Biao Feng and Valery I. Levitas
Triaxial-Stress-Induced Homogeneous Hysteresis-Free First-Order Phase Transformations with Stable Intermediate Phases, Valery I. Levitas, Hao Chen, and Liming Xiong
An experimental study on the characteristics of wind-driven surface water film flows by using a multi-transducer ultrasonic pulse-echo technique, Yang Liu, Wen-Li Chen, Leonard J. Bond, and Hui Hu
R2U2: monitoring and diagnosis of security threats for unmanned aerial systems, Patrick Moosbrugger, Kristin Y. Rozier, and Johann Schumann
Comparison of acoustoelastic Lamb wave propagation in stressed plates for different measurement orientations, Ning Pei and Leonard J. Bond
Characterizing Data Dependence Constraints for Dynamic Reliability Using n-Queens Attack Domains, Eric W. D. Rozier, Kristin Yvonne Rozier, and Ulya Bayram
Scaled experiment investigating sonomechanically enhanced inert gas sparging mass transfer, Floren Rubio, Leonard J. Bond, and Edward Blandford
Passive Scalar Transport Modeling for Hybrid RANS/LES Simulation, Zifei Yin and Paul A. Durbin
Submissions from 2016
Numerical analysis of aerodynamic noise mitigation via leading edge serrations for a rod–airfoil configuration, Bharat Raj Agrawal and Anupam Sharma
Helical modes in boundary layer transition, Rikhi Bose and Paul A. Durbin
Influence of laminate sequence and fabric type on the inherent acoustic nonlinearity in carbon fiber reinforced composites, Sunil Kishore Chakrapani, Daniel J. Barnard, and Vinay Dayal
Nonlinear forced vibration of carbon fiber/epoxy prepreg composite beams: Theory and experiment, Sunil Kishore Chakrapani, Daniel J. Barnard, and Vinay Dayal
Transition to turbulence by interaction of free-stream and discrete mode perturbations, Paul A. Durbin and Rikhi Bose
Effects of gasket on coupled plastic flow and strain-induced phase transformations under high pressure and large torsion in a rotational diamond anvil cell, Biao Feng and Valery I. Levitas
Phase field approach to dislocation evolution at large strains: Computational aspects, Mahdi Javanbakht and Valery I. Levitas
Phase field simulations of plastic strain-induced phase transformations under high pressure and large shear, Mahdi Javanbakht and Valery I. Levitas
Comment on “In situ imaging of ultra-fast loss of nanostructure in nanoparticle aggregates” [J. Appl. Phys. 115, 084903 (2014)], Valery I. Levitas and Yong Seok Hwang
Phase field approach with anisotropic interface energy and interface stresses: Large strain formulation, Valery I. Levitas and James A. Warren
Numerical Investigation of Aerodynamic Performance and Loads of a Novel Dual Rotor Wind Turbine, Benham Moghadassian, Aaron Rosenberg, and Anupam Sharma
A new mixed basis Navier–Stokes formulation for incompressible flows over complex geometries, Avinaash Murali and R Ganesh Rajagopalan
Dr. Sarkar and Dr. Hu attend international wind engineering workshop, Clay Paciorek
Higher order acoustoelastic Lamb wave propagation in stressed plates, Ning Pei and Leonard J. Bond
Survey of advanced nuclear technologies for potential applications of sonoprocessing, Floren Rubio, Edward D. Blanford, and Leonard J. Bond
An adaptive DES smodel that allows wall-resolved eddy simulation, Zifei Yin and Paul A. Durbin
Performance and modeling of paired polishing process, Tianyu Yu, David Thomas Asplund, Ashraf F. Bastawros, and Abhijit Chandra
Submissions from 2015
LES of spatially developing turbulent boundary layer over a concave surface, Sunil K. Arolla and Paul A. Durbin
Influence of fiber orientation on the inherent acoustic nonlinearity in carbon fiber reinforced composites, Sunil Kishore Chakrapani, Daniel J. Barnard, and Vinay Dayal
An intermittency model for predicting roughness induced transition, Xuan Ge and Paul A. Durbin
Interaction of Phase Transformations and Plasticity at the Nanoscale: Phase Field Approach, Valery I. Levitas and M. Javanbakht
Pre-Stressing Micron-Scale Aluminum Core-Shell Particles to Improve Reactivity, Valery I. Levitas, Jena McCollum, and Michelle Pantoya
Internal stresses in pre-stressed micron-scale aluminum core-shell particles and their improved reactivity, Valery I. Levitas, Jena McCollum, Michelle L. Pantoya, and Nobumichi Tamura
Multiphase phase field theory for temperature- and stress-induced phase transformations, Valery I. Levitas and Arunabhas M. Roy
Thermodynamically consistent phase field theory of phase transformations with anisotropic interface energies and stresses, Valery I. Levitas and James A. Warren
On the dynamic computation of the model constant in delayed detached eddy simulation, Zifei Yin, K.R. Reddy, and Paul A. Durbin
Submissions from 2014
The interaction of Rayleigh waves with delaminations in composite laminates, Sunil Kishore Chakrapani and Vinay Dayal
Strain-induced phase transformation under compression in a diamond anvil cell: Simulations of a sample and gasket, Biao Feng, Valery I. Levitas, and Yanzhang Ma
Multiple Pure Tone Noise Prediction, Fei Han, Anupam Sharma, Umesh Paliath, and Chingwei Shieh
Internal stress-induced melting below melting temperature at high-rate laser heating, Yong Seok Hwang and Valery I. Levitas
Phase field approach to martensitic phase transformations with large strains and interface stresses, Valery I. Levitas
Unambiguous Gibbs dividing surface for nonequilibrium finite-width interface: Static equivalence approach, Valery I. Levitas
Phase transformations in nanograin materials under high pressure and plastic shear: nanoscale mechanisms, Valery I. Levitas and Mahdi Javanbakht
Melting and solidification of nanoparticles: Scale effects, thermally activated surface nucleation, and bistable states, Valery I. Levitas and Kamran Samani
Propagating phase interface with intermediate interfacial phase: Phase field approach, Kasra Momeni and Valery I. Levitas
A novel dual-rotor turbine for increased wind energy capture, Aaron J. Rosenberg, Suganthi Selvaraj, and Anupam Sharma
Measurements in support of wind farm simulations and power forecasts: The Crop/Wind-energy Experiments (CWEX), Eugene S. Takle, Daniel Andrew Rajewski, J. K. Lundquist, William A. Gallus Jr., and Anupam Sharma
The Effect of Wake Turbulence Intensity on Transition in a Compressor Cascade, Jan G. Wissink, Tamer A. Zaki, Wolfgang Rodi, and Paul A. Durbin
Submissions from 2013
Modeling rotation and curvature effects within scalar eddy viscosity model framework, Paul A. Durbin and Sunil K. Arolla
Coupled phase transformations and plastic flows under torsion at high pressure in rotational diamond anvil cell: Effect of contact sliding, Biao Feng and Valery I. Levitas
Plastic flows and phase transformations in materials under compression in diamond anvil cell: Effect of contact sliding, Biao Feng, Valery I. Levitas, and Oleg M. Zarechnyy
Strain-induced phase transformations under compression, unloading, and reloading in a diamond anvil cell, Biao Feng, Oleg M. Zarechnyy, and Valery I. Levitas
Phase field simulation of kinetic superheating and melting of aluminum nanolayer irradiated by pico- and femtosecond laser, Yong Seok Hwang and Valery I. Levitas
Interface stress for nonequilibrium microstructures in the phase field approach: Exact analytical results, Valery I. Levitas
Anisotropic Compositional Expansion and Chemical Potential for Amorphous Lithiated Silicon under Stress Tensor, Valery I. Levitas and Hamed Attariani
Phase field approach to interaction of phase transformation and dislocation evolution, Valery I. Levitas and Mahdi Javanbakht
Multiple twinning and variant-variant transformations in martensite: Phase-field approach, Valery I. Levitas, Arunabha M. Roy, and Dean L. Preston
Prediction of Aerodynamic Tonal Noise from Open Rotors, Anupam Sharma and Hsuan-nien Chen
Submissions from 2012
Particulate mixing in a turbulent serpentine duct, X. Huang and Paul A. Durbin
Shear-induced phase transition of nanocrystalline hexagonal boron nitride to wurtzitic structure at room temperature and lower pressure, Cheng Ji, Valery I. Levitas, Hongyang Zhu, Jharna Chaudhuri, Archis Marathe, and Yanzhang Ma
Mechanochemical Continuum Modeling of Nanovoid Nucleation and Growth in Reacting Nanoparticles, Valery I. Levitas and Hamed Attariani
Reply to “Comment on 'Mechanochemical Continuum Modeling of Nanovoid Nucleation and Growth in Reacting Nanoparticles'″, Valery I. Levitas and Hamed Attariani
Advanced phase-field approach to dislocation evolution, Valery I. Levitas and Mahdi Javanbakht
High-density amorphous phase of silicon carbide obtained under large plastic shear and high pressure, Valery I. Levitas, Yanzhang Ma, Emre Selvi, Jianzhe Wu, and John A. Patten
Virtual melting as a new mechanism of stress relaxation under high strain rate loading, Valery I. Levitas and Ramon Ravelo
Crystal-crystal phase transformation via surface-induced virtual premelting, Valery I. Levitas, Zhaohui Ren, Yuewu Zeng, and Gaorong Han
Guided plate wave scattering at vertical stiffeners and its effect on source location, Ricky Steven Reusser, Dale E. Chimenti, Ronald A. Roberts, and Stephen D. Holland
Coupled plastic flow and phase transformation under compression of materials in a diamond anvil cell: Effects of transformation kinetics and yield strength, Oleg M. Zarechnyy, Valery I. Levitas, and Yanzhang Ma
Submissions from 2011
Review: Adapting scalar turbulence closure models for rotation and curvature, Paul A. Durbin
Thermographic signal reconstruction for vibrothermography, Stephen D. Holland
Quantifying the vibrothermographic effect, Stephen D. Holland, Christopher Uhl, Zhong Ouyang, Ming Li, William Q. Meeker, John Lively, Lisa Brasche, and David Eisenmann
Phase transition and structure of silver azide at high pressure, Dongbin Hou, Fuxiang Zhang, Cheng Ji, Trevor Hannon, Hongyang Zhu, Jianzhe Wu, Valery I. Levitas, and Yanzhang Ma
