Temperature dependence of magnetic anisotropy of Ga-substituted cobalt ferrite

Thumbnail Image
Date
2008-01-01
Authors
Ranvah, N.
Melikhov, Y.
Jiles, David
Snyder, J.
Moses, A.
Williams, P.
Song, S. H.
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
Authors
Person
Jiles, David
Distinguished Professor Emeritus
Research Projects
Organizational Units
Organizational Unit
Materials Science and Engineering
Materials engineers create new materials and improve existing materials. Everything is limited by the materials that are used to produce it. Materials engineers understand the relationship between the properties of a material and its internal structure — from the macro level down to the atomic level. The better the materials, the better the end result — it’s as simple as that.
Journal Issue
Is Version Of
Versions
Series
Department
Materials Science and Engineering
Abstract

The temperature dependence of magnetization, magnetic anisotropy, and coercive field of gallium-substituted cobaltferrite was investigated for a series of compositions of CoGaxFe2−xO4 (0⩽x⩽0.8). Hysteresis loops were measured for each sample over the range of −5T⩽μ0H⩽5T for selected temperatures between 10 and 400K. The magnetization at 5T and low temperatures was found to increase for the lower Ga contents (x=0.2 and 0.4) compared to pure CoFe2O4, indicating that at least initially, Ga3+substitutes predominantly into the tetrahedral sites of the spinel structure. The high field regions of these loops were modeled using the law of approach to saturation, which represents the rotational process, together with an additional linear forced magnetization term. The first order cubic magnetocrystalline anisotropy coefficient K1 was calculated from curve fitting to these data. It was found that K1 decreased with increasing Ga content at all temperatures. Both anisotropy and coercivity increased substantially as temperature decreased. Below 150K, for certain compositions (x=0, 0.2, 0.4), the maximum applied field of μ0H=5T was less than the anisotropy field and, therefore, insufficient to saturate the magnetization. In these cases, the use of the law of approach method can lead to calculated values of K1 which are lower than the correct value.

Comments

The following article appeared in Journal of Applied Physics 103 (2008): 07E506 and may be found at http://dx.doi.org/10.1063/1.2832503.

Description
Keywords
Citation
DOI
Copyright
Tue Jan 01 00:00:00 UTC 2008
Collections