Submissions from 2009
Frequency Dependence of Vibrothermography, Wenjun Zhang, Stephen D. Holland, and Jeremy Blake Renshaw
Submissions from 2008
Generating tap test images with a free-hand motorized tapper, Daniel J. Barnard, Cory D. Foreman, and David K. Hsu
Evaluation of the transient eddy current potential drop of a four point probe, John R. Bowler
Terahertz ray system calibration and material characterizations, Chien-Ping T. Chiou, James L. Blackshire, and R. Bruce Thompson
Flourescent penetrant inspection—cleaning study update, David J. Eisenmann and Lisa H. Brasche
Forensic examination using a nondestructive evaluation method for surface metrology, David J. Eisenmann and L. Scott Chumbley
Mechanical hysteresis as an NDE tool for evaluating composite honeycomb damage, Cory D. Foreman, Vinay Dayal, Daniel J. Barnard, and David K. Hsu
A scaling law for nondestructive evaluation of shot peening induced surface material property deviations, Anatoli M. Frishman, Chester C.H. Lo, Y. Shen, and Norio Nakagawa
Joint estimation of the flaw size distribution and pod function, P. Hovey, William Q. Meeker, and M. Li
Laboratory pod data acquisition from inner layer cracks in simulated airframe structures, Brian F. Larson, Erin M. Madison, and Norio Nakagawa
A noise interference model for estimating probability of detection for nondestructive evaluations, M. Li and William Q. Meeker
Self-consistent swept frequency eddy current measurements for characterization of near surface material conditions, Chester C.H. Lo, Anatoli M. Frishman, Y. Shen, and Norio Nakagawa
Effects of dynamic and static loading on eddy current NDE of fatigue cracks, Chester C.H. Lo and Norio Nakagawa
Evaluation of surface-modified materials by model assisted analyses of Barkhausen effect signals, Chester C.H. Lo and Y. Shen
Edge effects in four point direct current potential drop measurement, Yi Lu, John R. Bowler, Chongxue Zhang, and Nicola Bowler
Ultrasonic detection of anomalous machining damage, Frank J. Margetan, Darrel Enyart, and R. Bruce Thompson
Shot-peening intensities vs. eddy current signals as seen in iterative treatment-measurement experiment, Norio Nakagawa, Anatoli M. Frishman, Y. Shen, and Chester C.H. Lo
Study of the effects of EDM notch width on eddy current signal response, Norio Nakagawa, M. Yang, Brian F. Larson, E. M. Madison, and D. Raulerson
The Effect of Crack Closure on Heat Generation on Vibrothermography, Jeremy Blake Renshaw, Stephen D. Holland, R. Bruce Thompson, and Christopher Uhl
Effects of crack morphology and closure on ultrasonic response, Ronald A. Roberts
Modeling the 2008 Ultrasonic Benchmark Problems, Lester W. Schmerr Jr. and Ruiju Huang
2008 ultrasonic benchmark studies of interface curvature—a summary, Lester W. Schmerr Jr., Ruiju Huang, R. Raillon, S. Mahaut, N. Leymarie, S. Lonne, S.-J. Song, H.-J. Kim, M. Spies, and V. Lupien
Bobbin coil signal variation due to an axisymmetric circumferential groove in a tube, Theodoros P. Theodoulidis and John R. Bowler
Solution of boundary integral equations for eddy current nondestructive evaluation in three dimensions, Ming Yang, Jiming Song, and Norio Nakagawa
Electromagnetic characterization of the depth of surface-hardening in steel, C. Zhang and Nicola Bowler
Submissions from 2006
An Experimental Study of Effects of Overlaying Tissues on HIFU Lesion, Tao Long, Viren R. Amin, Ronald A. Roberts, R. Bruce Thompson, Scott R. McClure, and Timothy Ryken
Submissions from 2005
A Study of Effects of Tissue Inhomogeneity on HIFU Beam, Viren R. Amin, Ronald A. Roberts, Tao Long, R. Bruce Thompson, and Timothy Ryken
HIFU Therapy Planning Using Pre‐treatment Imaging and Simulation, Viren R. Amin, Liangshou Wu, Ronald A. Roberts, R. Bruce Thompson, and Timothy Ryken
Events from 1999
Acoustic Harmonic Generation Measurements for Materials Characterization, Daniel J. Barnard
Detection and Quantification of Intergranular Corrosion Around Wing Skin Fasteners Using the Dripless Bubbler Ultrasonic Scanner, Daniel J. Barnard and David K. Hsu
Signal Processing Techniques for Eddy-Current Data, J. P. Basart, John C. Moulder, S.-F. Chuang, and B. Wang
Pulsed Eddy Current Method: an Overview, R. E. Beissner, James H. Rose, and N. Nakagawa
Short-Time Behaviour in Pulsed Eddy-Current Nondestructive Evaluation, S. K. Burke, G. R. Hugo, and John C. Moulder
Improved Measurements of Case Depth by the Application of Signal Processing Algorithms to Barkhausen Effect Data, H. Cao, M. J. Johnson, S. Fung, and David C. Jiles
Geometrical and Ultrasonic Modeling of Hard-Alpha Defect Components in Titanium Alloys, Chien-Ping Chiou, Brian Boyd, R. Bruce Thompson, and James Oliver
Use of an Electroacoustic Measurement Model for Ultrasonic Transducer Characterization, Changjiu Dang and Lester W. Schmerr Jr.
Development of Motorized Azimuthal Scanners for Ultrasonic NDE Of Composites, Dong Fei and David K. Hsu
The Effects of Microstructure on the Response of Aluminum E-127 Calibration Standards, Y. Guo, R. Bruce Thompson, David Kent Rehbein, Frank J. Margetan, and M. Warchol
General Artifact Reduction Scheme for Laminography, Han-Chi Hsieh and John P. Basart
Ultrasonic Imaging of Internal Structures of a Fiber Steered Composite Panel, David K. Hsu, John J. Peters, and Richard D. Hale
A Study on the Nondestructive Evaluation of Carbon/Carbon Brake Disks Using Ultrasonics, Kwang-Hee Im, David K. Hsu, and Hyunjo Jeong
Verification of Deterministic Scattering Computations and Some Observations, Feyzi Inanc
Eddy-Current and Magnetic Measurements on Case-Hardened Steel, M. J. Johnson, H. Cao, and John C. Moulder
Development of Computer Based Educational Materials Through the North Central Collaboration for Education in NDE, Brian Larson
Texture Measurement in Aluminum Alloy at High Temperature, Guizhong Liu, David Kent Rehbein, and R. Bruce Thompson
Nondestructive Evaluation of Fatigue Damage Using Magnetic Measurement Techniques, C. C. H. Lo, F. Tang, Y. Shi, David C. Jiles, and S. B. Biner
An Analytical Approximation for a Common Ultrasonic Grain Noise Diffraction Integral, Frank J. Margetan, R. Bruce Thompson, and Terence P. Lerch
Photoinductive NDE Method: Review of the Principle and Applications, N. Nakagawa
Ultrasonic Attenuation in Duplex Titanium Alloys, P. D. Panetta and R. Bruce Thompson
Development of Ultrasonic Inspection for a Bonded Superalloy Blade, John J. Peters, David K. Hsu, and Paul J. Zombo
Recent Developments in Kirchhoff Crack Tip Diffraction Correction, R. A. Roberts
Modeling and Simulation of NDE Inspections, Lester W. Schmerr Jr.
A Review of Selected Contributions to Harmonic Generation and Radiation Damage Research by Otto Buck, Donald O. Thompson
Overview of the ETC POD Methodology, R. Bruce Thompson
The Effect of Scattered Radiation in X-Ray Techniques—Experiments and Theoretical Considerations, Gerd-Rüdiger Tillack, Valentin M. Artemiev, and Joseph Nahum Gray
Correlation Between NDE Measurements and Physical Properties of Copper Powder Metallurgy Components, D. Utrata and J. Oswood
Application of Differential Global Positioning System (DGPS) Indexing to Remote Sensing Photogrammetry, Samuel J. Wormley
Application of Java Applets to Basic Ultrasonics Education Via the Internet, Samuel J. Wormley
2-D and 3-D Lamb-Wave Spectrum Analysis Using Complex Transducer Points, Han Zhang and Dale E. Chimenti
Air-Coupled Ultrasonic Beam Transmission Applied to Material Characterization, Han Zhang and Dale E. Chimenti
Events from 1998
Attenuation and Dispersion of Ultrasonic Waves in Rolled Aluminum, S. Ahmed and R. Bruce Thompson
Field and Beta-Site Testing of the Dripless Bubbler Ultrasonic Scanner, Daniel J. Barnard and David K. Hsu
Quantitative Assessment of Corrosion in Aircraft Structures Using Scanning Pulsed Eddy Current, Jay A. Bieber, Cheng-Chi Tai, and John C. Moulder
Detection of Fatigue Crack Propagation in Steel Using Magnetic Measurements, Y. Bi and David C. Jiles
Development of Geometrical Models of Hard-Alpha Inclusions for Ultrasonic Analysis in Titanium Alloys, Brian Boyd, Chien-Ping Chiou, R. Bruce Thompson, and James H. Oliver
Effect of Rough Surfaces on Guided Waves in Plates, Dale E. Chimenti and O. I. Lobkis
The Use of Ultrasonic Flaw and Noise Models in Designing Titanium Test Blocks, Chien-Ping Chiou, Isaac Yalda, Frank J. Margetan, R. Bruce Thompson, and Derek J. Sturges
The Application of Wavelets and Fuzzy Logic to Eddy Current Flaw Detection in Steam Generator Tubes, Sheng-Fa Chuang, John P. Basart, and John C. Moulder
Technology Transfer Using XRSIM as a Training Tool, Bruce Crouse, Joe Gray, and Brian Larson
Refining Automated Ultrasonic Inspections with Simulation Models, M. Garton
Ultrasonic Inspectability Models for Jet Engine Forgings, Timothy A. Gray
Ultrasonic Evaluation of Transient Liquid Phase Bonding in Single Crystal Superalloy Castings, David K. Hsu, John J. Peters, Rahul Singh, Paula D. Freyer, Robert E. Shannon, and Paul Zombo
Pulsed Eddy-Current Measurements for the Characterization of Thin Layers and Surface Treatments, M. J. Johnson and John R. Bowler
North Central Collaboration for Education in NDE/NDT, Brian Larson and David K. Holger
Ultrasonic Transducer Radiation through a Curved Fluid-Solid Interface, Terence P. Lerch, Lester W. Schmerr Jr., and Alexander Sedov
In-Plane Elastic Property Characterization in Composite Plates, O. I. Lobkis, Dale E. Chimenti, Han Zhang, and M. Rudoph
Ultrasonic Signal Attenuation in Engine Titanium Alloys, Frank J. Margetan, P. D. Panetta, and R. Bruce Thompson
Improved Methodology for Inspection Reliability Assessment for Detecting Synthetic Hard Alpha Inclusions in Titanium, William Q. Meeker Jr., Shuen-Lin Jeng, Chien-Ping Chiou, and R. Bruce Thompson
Modeling Eddy Current Crack Signals of Differential and Reflection Probes, Norio Nakagawa, K. Dasoju, T. A. Khan, and John C. Moulder
Use of Electron Backscatter Diffraction in Understanding Texture and the Mechanisms of Backscattered Noise Generation in Titanium Alloys, P. D. Panetta, R. Bruce Thompson, and Frank J. Margetan
The Role of Propagation Characteristics in Acoustic Emission Pipeline Leak Location, Lance E. Rewerts, Ronald A. Roberts, and M. Amanda Clark
Uniform Evaluation of the Four Dimensional Transducer Transmission Phase Integral, Ronald A. Roberts
Scaling Relation for the Inductance of a Coil on a Ferromagnetic Half-Space, James H. Rose, Cheng-Chi Tai, and John C. Moulder
Efficient Reconstruction of Elastic Stiffnesses in Isotropic and Anisotropic Plates, M. Rudolph, O. I. Lobkis, and Dale E. Chimenti
Finite Element Modeling of the Effect of Creep Damage on a Magnetic Detector Signal for Seam-Welded Steel Pipes, M. J. Sablik, David C. Jiles, and M. R. Govindaraju
Probability of Detection Modeling for Ultrasonic Testing, Pradipta Sarkar, William Q. Meeker, R. Bruce Thompson, Timothy A. Gray, and Warren Junker
Electromechanical Modeling of Ultrasonic Transducers, Lester W. Schmerr Jr., Chanjiu Dang, and Alexander Sedov
Photoinductive Imaging for Bolt Hole Corner Crack Inspection, Cheng-Chi Tai and John C. Moulder
Coupling Microstructure Outputs of Process Models to Ultrasonic Inspectability Predictions, R. Bruce Thompson, Frank J. Margetan, I. Yalda, Chien-Ping Chiou, and P. Panetta
Linear and Nonlinear Image Restoration Methods for Eddy Current Nondestructive Evaluation, Bing Wang, John P. Basart, and John C. Moulder
Low Frequency, Pulsed Eddy Currents for Deep Penetration, Wililam W. Ward III and John C. Moulder
Internet Offering to Foster NDE/NDT Technological Education in Community and Technical Colleges, Samuel J. Wormley
Complex Contour Ultrasonic Scanning System Application and Training, Samuel J. Wormley and H. Zhang
Use of Rician Distributions to Predict the Distributions of Ultrasonic Flaw Signals in the Presence of Backscattered Noise, Isaac Yalda, Frank J. Margetan, and R. Bruce Thompson
Forward Modeling of Transducer Misalignment Effects in Ultrasonic Leaky Wave Measurements, Smaine Zeroug, Han Zhang, and Dale E. Chimenti
Events from 1997
Application of Ultrasonic Imaging Techniques for Evaluation of Equine Tendon Injury, Viren Amin, Larry Booth, Ronald A. Roberts, and Nam-Deuk Kim
Developments and Testing of the Dripless Bubbler Ultrasonic Scanner, Daniel J. Barnard and David K. Hsu
Improvements on Low Cost CT Systems, P. Basetty, T. Jensen, and Joseph N. Gray
Time-Gating of Pulsed Eddy Current Signals for Defect Characterization and Discrimination in Aircraft Lap-Joints, Jay A. Bieber, Sunil K. Shaligram, James H. Rose, and John C. Moulder
UT Coverage of Nozzle Inner Radius including Amplitudes, L. Carcione, J. Isenberg, A. Minachi, and D. MacDonald
