Degree Type

Dissertation

Date of Award

2017

Degree Name

Doctor of Philosophy

Department

Electrical and Computer Engineering

Major

Electrical Engineering

First Advisor

Degang Chen

Abstract

In a high-speed digital communication system, jitter performance plays a crucial role in Bit-Error Rate (BER). It is important to accurately derive each type of jitter as well as total jitter (TJ) and to identify the root causes of jitter by jitter decomposition.

In this work, we propose new jitter decomposition techniques in high-speed links testing. The background of jitter decomposition is described in chapter 1. In chapter 2, duty cycle distortion jitter amplification is introduced. As channel loss results in both ISI and jitter amplification, DCD amplification is a big concern in high-speed links. The derivation of a formula of DCD amplification for data channels is included and the calculation result matches the time-domain simulation in the system.

Chapter 3 provides an accurate jitter decomposition algorithm using Least Squares (LS) which simultaneously separates ISI, RJ, and PJ. A new time domain ISI model is proposed, which is faster and more accurate than the conventional ISI model. This algorithm obtains the estimated individual jitter component value with fine accuracy by using less samples of total jitter data compared with conventional methods. The simulation and measurement show the accuracy and efficiency of this algorithm with less data samples.

In chapter 4, a low-cost comparator-based jitter decomposition algorithm is proposed. Instead of using TIE jitter sequence to decompose, it uses a low cost and simple comparator network to identify the deviation of current sampling positions from the ideal sampling positions to represent the TIE. It simultaneously separates ISI, DCD, and PJ and can achieve similar accuracy compared to the instrument test. Both the simulation and measurement show the decomposition algorithm with great accuracy and efficiency.

In chapter 5, a low cost and simple dithering method to improve the test of linearity of analog-to-digital converter (ADC) is proposed. This method exhibits an improvement and enhancement for the ultra-fast segmented model identification of linearity error (uSMILE) algorithm which reduces 99% of the test time compared to the conventional method. In this study, we proposed three types of distribution dithering methods adding to the ramp input signal to reduce the estimation error when uSMILE was applied in low resolution ADCs. The fix pattern distribution was proved as the most efficient and cost-effective method by comparing with the Gaussian, uniform, and fix-pattern distributions. Both the simulation results and hardware measurement indicate that the estimation error can be significantly reduced in 12-bit SAR ADC with effective dithering.

DOI

https://doi.org/10.31274/etd-180810-5907

Copyright Owner

Yan Duan

Language

en

File Format

application/pdf

File Size

125 pages

Share

COinS