Campus Units

Geological and Atmospheric Sciences

Document Type

Article

Publication Version

Published Version

Publication Date

8-25-2018

Journal or Book Title

Transport in Porous Media

DOI

10.1007/s11242-018-1136-9

Abstract

Understanding pore-scale flow and transport processes is important for understanding flow and transport within rocks on a larger scale. Flow experiments on small-scale micromodels can be used to experimentally investigate pore-scale flow. Current manufacturing methods of micromodels are costly and time consuming. 3D printing is an alternative method for the production of micromodels. We have been able to visualise small-scale, single-phase flow and transport processes within a 3D printed micromodel using a custom-built visualisation cell. Results have been compared with the same experiments run on a micromodel with the same geometry made from polymethyl methacrylate (PMMA, also known as Perspex). Numerical simulations of the experiments indicate that differences in experimental results between the 3D printed micromodel and the Perspex micromodel may be due to variability in print geometry and surface properties between the samples. 3D printing technology looks promising as a micromodel manufacturing method; however, further work is needed to improve the accuracy and quality of 3D printed models in terms of geometry and surface roughness.

Comments

This article is published as Watson, Francesca, Julien Maes, Sebastian Geiger, Eric Mackay, Mike Singleton, Thomas McGravie, Terry Anouilh et al. "Comparison of Flow and Transport Experiments on 3D Printed Micromodels with Direct Numerical Simulations." Transport in Porous Media (2018). doi: 10.1007/s11242-018-1136-9.

Creative Commons License

Creative Commons Attribution 4.0 License
This work is licensed under a Creative Commons Attribution 4.0 License.

Copyright Owner

The Authors

Language

en

File Format

application/pdf

Included in

Geology Commons

Share

COinS