Follow

Submissions from 2014

PDF

Optimization Model for a Thermochemical Biofuels Supply Network Desig n, Yihua Li, Tristan Brown, and Guiping Hu

PDF

Techno-economic Analysis of Co-located Corn Grain and Corn Stover Ethanol Plants, Longwen Ou, Tristan Brown, Rajeeva Thilakaratne, Guiping Hu, and Robert C. Brown

PDF

A pseudo-likelihood analysis for incomplete warranty data with a time usage rate variable and production counts, Yu Qiu, Danial J. Nordman, and Stephen B. Vardeman

PDF

One-sample Bayes inference for symmetric distributions of 3-D rotations, Yu Qiu, Danial J. Nordman, and Stephen B. Vardeman

PDF

A Wrapped Trivariate Normal Distribution and Bayes Inference for 3-D Rotations, Yu Qiu, Daniel J. Nordman, and Stephen B. Vardeman

PDF

Potential competition for biomass between biopower and biofuel under RPS and RFS2, Mohammad Rahdar, Lizhi Wang, and Guiping Hu

PDF

Mild Catalytic Pyrolysis of Biomass for Production of Transportation Fuels: A Techno-Economic Analysis, Rajeeva Thilakaratne, Tristan Brown, Yihua Li, Guiping Hu, and Robert C. Brown

PDF

Joint Optimization of Asset and Inventory Management in a Product–Service System, Xiang Wu and Sarah M. Ryan

PDF

Feasibility of Automatic Detection of Surface Cracks in Wind Turbine Blades, Huiyi Zhang and John K. Jackman

PDF

Integrated supply chain design for commodity chemicals production via woody biomass fast pyrolysis and upgrading, Yanan Zhang, Guiping Hu, and Robert C. Brown

PDF

Life cycle assessment of the production of hydrogen and transportation fuels from corn stover via fast pyrolysis, Yanan Zhang, Guiping Hu, and Robert C. Brown

Submissions from 2013

PDF

Techno-economic analysis of biomass to transportation fuels and electricity via fast pyrolysis and hydroprocessing, Tristan Brown and Guiping Hu

PDF

Regional Differences in the Economic Feasibility of Advanced Biorefineries: Fast Pyrolysis and Hydroprocessing, Tristan Brown, Rajeeva Thilakaratne, Robert C. Brown, and Guiping Hu

PDF

Capturing Cognitive Fingerprints from Keystroke Dynamics, J. Morris Chang, Chi-Chen Fang, Kuan-Hsing Ho, Norene Kelly, Pei-Yuan Wu, Yixiao Ding, Chris Chu, Stephen B. Gilbert, Amed E. Kamal, and Sun-Yuan Kung

PDF

Scenario Construction and Reduction Applied to Stochastic Power Generation Expansion Planning, Yonghan Feng and Sarah M. Ryan

PDF

Trunk muscle fatigue and its implications in EMG-assisted biomechanical modeling, Omid Haddad and Gary A. Mirka

PDF

Medial knee joint loading during stair ambulation and walking while carrying loads, Michelle Hall, Elizabeth R. Boyer, Jason C. Gillette, and Gary A. Mirka

PDF

Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA, Ricky Hardis, Julie L.P. Jessop, Frank E. Peters, and Michael R. Kessler

PDF

Impact of Demand Response on Thermal Generation Investment with High Wind Penetration, Shan Jin, Audun Botterud, and Sarah M. Ryan

PDF

Optimization models for biorefinery supply chain network design under uncertainty, Narges Kazemzadeh and Guiping Hu

PDF

Space Perception in Virtual Environments: Displacement from the Center of Projection Causes Less Distortion than Predicted by Cue-Based Models, Jonathan W. Kelly, Melissa Burton, Brice Pollock, Eduardo Rubio, Michael Curtis, Julio de la Cruz, Stephen B. Gilbert, and Eliot H. Winer

PDF

Assessment and Evaluation of Objectives and Outcomes for Continuous Improvement of an Industrial Engineering Program, Kyung J. Min, John K. Jackman, and Douglas D. Gemmill

PDF

Visual Inspection of Casting Surfaces, Frank E. Peters, Richard T. Stone, Kristopher Patrick Watts, Peihan Zhong, and Alexander John Clemons

PDF

Full Virtual Reality vs. Integrated Virtual Reality Training in Welding, Richard T. Stone, Elease McLaurin, Peihan Zhong, and Kristopher Patrick Watts

PDF

Majority Voting by Independent Classifiers Can Increase Error Rates, Stephen B. Vardeman and Max Morris

PDF

Market Competition and Social Welfare Analysis for E10 and E85 with a 1 Game Theory Model, Minwen Yang and Guiping Hu

PDF

Supply chain design and operational planning models for biomass to drop-in fuel production, Leilei Zhang and Guiping Hu

PDF

Comparative techno-economic analysis of biohydrogen production via bio-oil gasification and bio-oil reforming, Yanan Zhang, Tristan Brown, Guiping Hu, and Robert C. Brown

PDF

Techno-economic analysis of fast pyrolysis and upgrading facilities employing two depolymerization pathways, Yanan Zhang, Tristan Brown, Guiping Hu, and Robert C. Brown

PDF

Techno-economic Analysis of Monosaccharide Production via Biomass Fast Pyrolysis, Yanan Zhang, Tristan Brown, Guiping Hu, and Robert C. Brown

PDF

Life cycle assessment of the production of hydrogen and transportation fuels from corn stover via fast pyrolysis, Yanan Zhang, Guiping Hu, and Robert C. Brown

PDF

Ontology-Based Knowledge Representation for Obsolescence Forecasting, Liyu Zheng, Raymond Nelson III, Peter Sandborn, and Janis P. Terpenny

Submissions from 2012

PDF

Bayes Inference for a Tractable New Class of Non-symmetric Distributions for 3-Dimensional Rotations, Melissa Ann Bingham, Danial J. Nordman, and Stephen B. Vardeman

PDF

Technoeconomic Sensitivity of Biobased Hydrocarbon Production via Fast Pyrolysis to Government Incentive Programs, Tristan Brown and Guiping Hu

PDF

Techno-economic analysis of biobased chemicals production via integrated catalytic processing, Tristan Brown, Yanan Zhang, Guiping Hu, and Robert C. Brown

PDF

An algorithm for defining the onset and cessation of the flexion-relaxation phenomenon in the low back musculature, Sangeun Jin, Xiaopeng Ning, and Gary A. Mirka

PDF

Computing Axes of Rotation for Setup Planning Using Visibility of Polyhedral Computer-Aided Design Models, Ye Li and Matthew C. Frank

PDF

An Exit and Entry Study of Renewable Power Producers: A Real Options Approach, Kyung J. Min, Chenlu Lou, and Chung-Hsiao Wang

PDF

Describing the active region boundary of EMG-assisted biomechanical models of the low back, Xiaopeng Ning, Sangeun Jin, and Gary A. Mirka

PDF

The Right View from the Wrong Location: Depth Perception in Stereoscopic Multi-User Virtual Environments, Brice Pollock, Melissa Burton, Jonathan W. Kelly, Stephen B. Gilbert, and Eliot H. Winer

Submissions from 2011

PDF

Methodology for assessing measurement error for casting surface inspection, G. Daricilar and Frank E. Peters

PDF

Medial Longitudinal Arch Deformation during Walking and Stair Navigation While Carrying Loads, Elizabeth Rose Hageman, Michelle Hall, Eric Gerard Sterner, and Gary A. Mirka

PDF

An Optimization Approach To Assessing the Self-Sustainability Potential of Food Demand in the Midwestern United States, Guiping Hu, Lizhi Wang, Susan W. Arendt, and Randy Boeckenstedt

PDF

The effect of a lower extremity kinematic constraint on lifting biomechanics, Sangeun Jin and Gary A. Mirka

PDF

Capacity Expansion in the Integrated Supply Network for an Electricity Market, Shan Jin and Sarah M. Ryan

PDF

Modeling and Solving a Large-Scale Generation Expansion Planning Problem Under Uncertainty, Shan Jin, Sarah M. Ryan, Jean-Paul Watson, and David L. Woodruff

PDF

Ergonomic interventions for commercial crab fishermen, Gary A. Mirka, Xiaopeng Ning, Sangeun Jin, Omid Haddad, and Kristen L. Kucera

PDF

Influence of asymmetry on the flexion relaxation response of the low back musculature, Xiaopeng Ning, Omid Haddad, Sangeun Jin, and Gary Mirka

PDF

Handling Material Problems as They Arise, David P. Sly

PDF

The Effect of Stance Width on Trunk Kinematics and Trunk Kinetics during Sagitally Symmetric Lifting, Christopher Sorenson, Omid Haddad, Samuel Campbell, and Gary Mirka

PDF

Virtual Reality Integrated Welder Training, Richard T. Stone, Kristopher Patrick Watts, and Peihan Zhong

PDF

A Computational/Experimental Platform for Investigating Three- Dimensional Puzzle Solving of Comminuted Articular Fractures, Thaddeus P. Thomas, Donald D. Anderson, Andrew Willis, Pengcheng Liu, Matthew C. Frank, J. Lawrence Marsh, and Thomas D. Brown

PDF

Optimal Replacement in the Proportional Hazards Model with Semi-Markovian Covariate Process and Continuous Monitoring, Xiang Wu and Sarah M. Ryan

Submissions from 2010

PDF

The effects of horizontal load speed and lifting frequency on lifting technique and biomechanics, Boyi Dai, Sangeun Jin, Xiaopeng Ning, and Gary Mirka

PDF

Heavy Traffic Analysis of a Simple Closed-Loop Supply Chain, Arka P. Ghosh, Sarah M. Ryan, Lizhi Wang, and Ananda Weerasinghe

PDF

Hand-hold location and trunk kinematics during box handling, Omid Haddad and Gary Mirka

PDF

The effect of sinusoidal rolling ground motion on lifting biomechanics, Xiaopeng Ning and Gary A. Mirka

PDF

Welfare Effects of Expansions in Equilibrium Models of an Electricity Market with Fuel Network, Sarah M. Ryan, Anthony Downward, Andrew Philpott, and Golbon Zakeri

PDF

Elementary Statistical Methods and Measurement Error, Stephen B. Vardeman, Joanne Wendelberger, Tom Burr, Michael S. Hamada, Leslie M. Moore, Marcus Jobe, Max Morris, and Huaiqing Wu

PDF

Effects of uncertain fuel costs on fossil fuel and electric energy flows in the US, Yan Wang and Sarah M. Ryan

PDF

Value of condition monitoring for optimal replacement in the proportional hazards model with continuous degradation, Xiang Wu and Sarah M. Ryan

PDF

An empirical validation of a base-excitation model to predict harvestable energy from a suspended-load backpack system, Xu Xu, Simon M. Hsiang, and Gary Mirka

Submissions from 2009

PDF

Analysis of Alternative Keyboards Using Learning Curves, Allison M. Anderson, Gary Mirka, Sharon M.B. Jones, and David B. Kaber

PDF

Modeling and Inference for Measured Crystal Orientations and a Tractable Class of Symmetric Distributions for Rotations in Three Dimensions, Melissa Ann Bingham, Daniel J. Nordman, and Stephen B. Vardeman

PDF

Bayes One-Sample and One-Way Random Effects Analyses for 3-D Orientations with Application to Materials Science, Melissa Ann Bingham, Stephen B. Vardeman, and Daniel J. Nordman

PDF

Automated fixture design for a rapid machining process, Wutthigrai Boonsuk and Matthew C. Frank

PDF

A Market Analysis on Green Production Lines Penetrating into Original Equipment Manufacturers (OEMs), Guiping Hu, Lizhi Wang, and Bopaya Bidanda

PDF

Biomechanical evaluation of postures assumed when harvesting from bush crops, Sangeun Jin, Ryan McCulloch, and Gary Mirka

PDF

Ergonomic risk factors for low back pain in North Carolina crab pot and gill net commercial fishermen, Kristen L. Kucera, Dana Loomis, Hester J. Lipscomb, Stephen W. Marshall, Gary A. Mirka, and Julie Daniels

PDF

Capacity expansion under a service-level constraint for uncertain demand with lead times, Rahul R. Marathe and Sarah M. Ryan

PDF

An evaluation of arborist handsaws, Gary Mirka, Sangeun Jin, and Jeff Hoyle

PDF

Uniformly Hyper-Efficient Bayes Inference in a Class of Nonregular Problems, Danial J. Nordman, Stephen B. Vardeman, and Melissa Ann Bingham

PDF

The effects of a suspended-load backpack on gait, Xu Xu, Simon M. Hsiang, and Gary Mirka

Submissions from 2008

PDF

Coordination indices between lifting kinematics and kinetics, Xu Xu, Simon M. Hsiang, and Gary Mirka

Submissions from 2007

PDF

Working on an Assignment with People you'll Never Meet! Case Study on Learning Operations Management in International Teams, Peter D. Ball, Hilary J. Grierson, Kyung J. Min, John K. Jackman, and Patrick Patterson

PDF

Effect of mould expansion on pattern allowances in sand casting of steel, Frank E. Peters, Robert Voigt, Shouzhu Ou, and Christoph Beckermann

PDF

A Multiperiod Generalized Network Flow Model of the U.S. Integrated Energy System: Part I—Model Description, Ana Quelhas, Esteban Gil, James D. McCalley, and Sarah M. Ryan

PDF

A Markov Decision Model to Evaluate Outsourcing in Reverse Logistics, Marco A. Serrato and Sarah M. Ryan

Submissions from 2006

PDF

Determining Setup Orientations From the Visibility of Slice Geometry for Rapid Computer Numerically Controlled Machining, Matthew C. Frank, Richard A. Wysk, and Sanjay B. Joshi

PDF

Machinability Analysis for 3-Axis Flat End Milling, Ye Li and Matthew C. Frank

PDF

Calibration, Error Analysis, and Ongoing Measurement Process Monitoring for Mass Spectrometry, Stephen B. Vardeman, Joanne Wendelberger, and Lily Wang

PDF

Optimal Price and Quantity of Refurbished Products, Jumpol Vorasayan and Sarah M. Ryan

Submissions from 2005

PDF

Likelihood and Bayesian Methods for Accurate Identification of Measurement Biases in Pseudo Steady-State Processes, Sriram Devanathan, Stephen B. Vardeman, and Derrick K. Rollins Sr.

PDF

On the Validity of the Geometric Brownian Motion Assumption, Rahul Ratnakar Marathe and Sarah M. Ryan

PDF

Allocating work in process in a multiple-product CONWIP system with lost sales, Sarah M. Ryan and Jumpol Vorasayan

PDF

Sheppard's correction for variances and the "quantization noise model", Stephen B. Vardeman

PDF

Likelihood-based statistical estimation from quantized data, Stephen B. Vardeman and Chiang-Sheng Lee

Submissions from 2004

PDF

Determining Multi-Criteria Priorities in the Planning of Electric Power Generation: The Development of an Analytic Hierarchy Process for Using the Opinions of Experts, Sung Chul Kim and Kyung J. Min

PDF

The Effect of Technological Improvement on Capacity Expansion for Uncertain Exponential Demand with Lead Times, Dohyun Pak, Nattapol Pornsalnuwat, and Sarah M. Ryan

PDF

Capacity Expansion for Random Exponential Demand Growth with Lead Times, Sarah M. Ryan

PDF

The Engineering Learning Portal for Problem Solving: Experience in a Large Engineering Economy Class, Sarah M. Ryan, John K. Jackman, Frank E. Peters, Sigurdur Olafsson, and Mary Huba

PDF

Development programs for one-shot systems using multiple-state design reliability models, Suntichai Shevasuthisilp and Stephen B. Vardeman

Submissions from 2003

PDF

Capacity expansion with lead times and autocorrelated random demand, Sarah M. Ryan

PDF

Total WIP and WIP mix for a CONWIP controlled job shop, Sarah M. Ryan and F. Fred Choobineh

PDF

Capacity expansion for a loss system with exponential demand growth, Alexander Simampo and Sarah M. Ryan

Submissions from 2001

PDF

The Impact of Surface Errors on the Location and Orientation of a Cylindrical Workpiece in a Fixture, Supapan Sangnui and Frank E. Peters

Submissions from 2000

PDF

Determining inventory levels in a CONWIP controlled job shop, Sarah M. Ryan, Bruno Baynat, and F. Fred Choobineh

PDF

A Simplified Procedure for Estimating Labor-Hour Requirements of Discrete Assemblies, Deepak Srinivas and Kyung J. Min

PDF

Form Error Estimation Using Spatial Statistics, Tai-Hung Yang and John K. Jackman

Submissions from 1999

PDF

Dimensional Variability of Aluminum Castings, W.C. Faustine, R.C. Voigt, and Frank Peters