Follow

Theses/Dissertations from 1996

PDF

Nd:YAG laser-assisted turning of difficult-to-machine silicon nitride , Bruce Clyde Janvrin

PDF

An FMCW radar system for short range surface contour mapping , Annette Lynn Latwesen

PDF

Torque on the cylinder block of an axial-piston swash-plate type hydrostatic pump , Noah Denver Manring

PDF

An investigation of series hybrid-electric vehicle operation, Christopher John Merriman

PDF

FTIR analysis of transient CO2 emissions in a circulating fluidized bed boiler , Thomas Steven Raines

PDF

Field study of energy savings in manufacturing facilities , Karen Louise Smith

PDF

Optimal synthesis of a planar four-bar mechanism with prescribed timing using generalized reduced gradient, simulated annealing and genetic algorithms , Gloria Kay Starns

PDF

Evaluation of the use of wind power to satisfy various electric and heating energy demand scenarios, Stein Stein

PDF

Analysis of limestone calcination and sulfation using transient gas analysis , Theodore Donald Thiede

PDF

Effects of shrouded stator cavity flows on multistage axial compressor aerodynamic performance , Steven Robert Wellborn

Theses/Dissertations from 1995

PDF

Modeling x-ray scattering process and applications of the scattering model , Taher Lutfi Al-Jundi

PDF

Surface and sub-surface ablation cell design for remote (robotic) radioactive soil analysis using Laser Ablation-Inductively Coupled-Atomic Emission Spectrometry/Mass Spectrometry LA-ICP-AES/MS , Reza Bashirzadeh

PDF

Nuclear plant diagnostics using neural networks with dynamic input selection , Anujit Basu

PDF

An active air spring suspension system without shock absorber on a quarter vehicle model, Mitchell Alonzo Duncklee

PDF

Investigation into the effect of the slipper compensating orifice size on the mechanical and volumetric efficiency of a fixed displacement axial piston hydrostatic unit, John Patrick Fleming

PDF

Ultrasonic measurement of drawability (r-values) of low carbon steel sheets , Kaveh Forouraghi

PDF

Propagation of uncertainty in a knowledge-based system to assess energy management strategies for new technologies , Chun-Yen Hsu

PDF

Total system performance assessment of the proposed high level radioactive waste repository site at Genting Island, Karimunjawa, Indonesia , Yudi Utomo Imardjoko

PDF

Numerical modeling of reactive gas assisted laser cutting of metals , Chin Kooi Lim

PDF

An investigation of the mechanics of rollover for cars and light trucks , Yvonne Irene Katherine Lund

PDF

Performance assessment modeling of alternative high level nuclear wasteforms , William Mark Nutt

PDF

Unstructured grid algorithms for two- and three-dimensional flows on parallel computers , Thomas Hans Ramin

PDF

Laser machining and its thermal effects on silicon nitride and steel , Aloke K. Ray

PDF

Unstructured surface and volume decimation of tessellated domains , Kevin Joseph Renze

PDF

A compliant model for estimation and optimization of damping in vibrating structures , Thomas Jeffrey Thompson

PDF

Dynamic balance and walking control of biped mechanisms , James J. Troy

PDF

Bubble and elutriation control in fluidized beds with electric fields , Jiun-Shen Wang

Theses/Dissertations from 1994

PDF

Simulation of three-dimensional incompressible flows with free-surfaces including fluid-structure interaction and microgravity flows , Sethuraman Babu

PDF

An experimental evaluation of capillary tube-suction line heat exchanger performance with alternative refrigerants HFC-134a and HFC-152a , Robert Rudolph Bittle

PDF

Numerical evaluation of corona discharge as a means of boundary layer control and drag reduction , Samir Hamza El-Khabiry

PDF

Advanced fuzzy logic controllers and self-tuning strategy , Shou-Heng Huang

PDF

Shell-side condensation of HFC-134a and HCFC-123 on enhanced-tube bundles , Joseph B. Huber

PDF

Reliability assessment of nuclear power plant fault-diagnostic systems using artificial neural networks , Keehoon Kim

PDF

Use of virtual reality in off-line robot programming, Darren Scott Knapp

PDF

A new methodology for the determination of transport properties of refrigerants , Jian-Yuan Lin

PDF

Unstructured grid analysis of three-dimensional conduction in complex geometries, John Charles Minor

PDF

Heat transfer and fluid flow in spray evaporators with application to reducing refrigerant inventory , Shane Alan Moeykens

PDF

The effect of liquid inundation, vapor shear, and non-condensible gases on the condensation of refrigerants HFC-134a and HCFC-123 , Lance Edward Rewerts

PDF

Measurement of elastic moduli of porous SiC/SiC ceramic matrix composites using ultrasonics, Vikram Saini

PDF

Automatic constraint-based synthesis of non-uniform rational B-spline surfaces , Philip Chacko Theruvakattil

PDF

Dynamics and controls for robot manipulators with open and closed kinematic chain mechanisms , Sam-Sang You

PDF

Emissions and combustion of fatty acid esters of soybean oil in a diesel engine, Yu Zhang

PDF

An experimental evaluation of the miscibility characteristics of ten different non-CFC refrigerants with fourteen different lubricants , Steven Charles Zoz

Theses/Dissertations from 1993

PDF

Determining char burning and sulfur sorption rates from dynamic analysis of CO2 and SO2 profiles , Nearchos J. Christofides

PDF

An experimental study of the thermal performance of R-134a and refrigerant blends in an air conditioning system , Stephen W. Crown

PDF

Evaluation of multigrid acceleration for a coupled, strongly implicit procedure for the Navier-Stokes equations, Robert L. Cupples

PDF

Carbon in fly ash analysis using photoacoustic spectroscopy , Jeffrey Raymond Dykstra

PDF

In-tube evaporation and condensation of HFC-134a and CFC-12 with various lubricant mixtures , Steven J. Eckels

PDF

Alternative technologies for refrigeration and air conditioning applications , Don Carlyle Gauger

PDF

Effects of gasket heat gain and an alternative refrigerant on refrigerator/freezer performance , Majid Ghassemi

PDF

Computer modeling of neutron radiography, Troy J. Groth

PDF

Dimensional verification and correction of five-axis numerically controlled milling tool paths , Yun-Ching Huang

PDF

A model of coal combustion dynamics in a fluidized bed combustor , Kenneth William Junk

PDF

Numerical simulation of two and three-dimensional viscous free surface flows in partially-filled containers using a surface capturing approach , Franklyn Joseph Kelecy

PDF

Remote robot manipulator coupled with remote-controlled guide vehicle for soil sampling in hazardous waste sites , Kiho Kim

PDF

Freezing problem in pipe flows , Jong Suk Lee

PDF

Using sensitivity derivatives of resonant response to guide structural redesign , Tsung-Hsiun Li

PDF

Collision-free path planning for robots using B-splines and simulated annealing , Horacio Martínez-Alfaro

PDF

An interactive graphical simulation of CNC milling, Craig T. Muncaster

PDF

Development of manufacturability constraints for press forming of sheet metal components, Nirmal Kumar Nair

PDF

The aerodynamics of a baseline supersonic throughflow fan rotor , Daniel Lawrence Tweedt

PDF

NURBS based computer interface for rapid prototyping, Janardhanan K. Varadachari

PDF

Dynamic modeling of multibody flexible structures , Jiechi Xu

PDF

Study of melting and freezing processes of water for application to ice thermal energy storage system , Liang Yong

Theses/Dissertations from 1992

PDF

Knowledge base expert system control of spatial xenon oscillations in pressurized water reactors , Serhat Alten

PDF

Nuclear power plant status diagnostics using a neural network with dynamic node architecture, Anujit Basu

PDF

Gas cleaning strategies for the operation of a wood-chip gasifier coupled to an internal combustion engine, Michael Keefe Brewer

PDF

Thermal analysis and modeling of a precision snap-action switch , Nien-Tsung Hsiao

PDF

Analytical and experimental studies of advanced laser cutting techniques , Ming-Jen Hsu

PDF

An implicit numerical scheme for the simulation of internal viscous flows on unstructured grids , Philip Charles Eberhardt Jorgenson

PDF

An artificial neutral network fault-diagnostic adviser for a nuclear power plant with error prediction, Keehoon Kim

PDF

The importance of input variables to a neural network fault-diagnostic system for nuclear power plants, Terry L. Lanc

PDF

Using size sensitivities to guide structural shape optimization , Afshin Mikaili

PDF

The influence of high voltage discharge on flat plate drag at low Reynolds number air flow, Frans Soetomo

PDF

Wall functions for the k - [epsilon] turbulence model in generalized nonorthogonal curvilinear coordinates , Douglas L. Sondak

PDF

An interactive graphical approach to off-line programming, James J. Troy

PDF

Using nonlinear sensitivities to estimate eigenvalues and eigenvectors for large design changes , Judith Marie Callicott Vance

Theses/Dissertations from 1991

PDF

Prediction of diesel engine particulate emission during transient cycles, Qiqing Jiang

PDF

Synthesis and analysis of elastic high-speed cam-operated mechanisms , Hsin-Ting Jonathan Liu

PDF

Tribological and arc erosion behaviors of copper-refractory metal in situ composites , Ping Liu

PDF

Automatic programming of arc welding robots , Srikanth Padmanabhan

PDF

A numerical model for a bubble in nucleate pool boiling , Rajendra K. Patil

PDF

Ionic structure of methane flames , Timothy Wayne Pedersen

PDF

A study of high speed flows in an aircraft transition duct , Bruce A. Reichert

PDF

Modification of axial-flow compressor stall margin by variation of stationary blade setting angles , John Paul Rukavina

PDF

Control of a very flexible robot in gravity , Jay E. Shannan

PDF

Adaptive torque control of a diesel engine for transient test cycles , Taner Tuken

PDF

Methods of measuring the solubility and viscosity of lubricating oil/refrigerant mixtures at high discharge pressures and temperatures , Nolan A. Van Gaalen

PDF

Elevated temperature erosion studies on some materials for high temperature applications , Jianren Zhou

PDF

Measurement of solubility, density, and viscosity of lubricant/refrigerant mixtures for HCFC-22 and HFC-134a, Steven Charles Zoz

Theses/Dissertations from 1990

PDF

Prediction of steady and unsteady flow and heat transfer over a cylinder in crossflow using a space-time marching algorithm , Brett William Batson

PDF

Incorporation of a rectangular void into a three-dimensional neutron diffusion nodal model , Mohamed Boussoufi

PDF

A primitive variable, strongly implicit calculation procedure for two and three-dimensional unsteady viscous flows: applications to compressible and incompressible flows including flows with free surfaces , Kuo-Huey Chen

PDF

On computations of the integrated space shuttle flowfield using overset grids , Ing-Tsau Chiu

PDF

Neutron and proton dosimetry at the LAMPF 800-MeV proton accelerator , Dorothy R. Davidson

PDF

Photoacoustic spectroscopy applied to on-line measurement of carbon loadings in fluidized bed combustion flue gas, Jeffrey Raymond Dykstra

PDF

Fuzzy logic control of a fluidized bed combustor, Stephen J. Koffman

PDF

Sensitivity analysis of finite element-based equilibrium problems using Padé approximants , Soon Ki Kwon

PDF

Design of an expert system for failed fuel identification and surveillance in EBR-II , Ramin Mikaili

PDF

Modeling and control of a two-arm elastic robot in gravity , Chaeyoun Oh