Creep behavior of copper-chromium in-situ composite

Thumbnail Image
Date
2004-02-01
Authors
Lee, K.
Whitehouse, A.
Hong, S.I.
Russell, Alan
Major Professor
Advisor
Committee Member
Journal Title
Journal ISSN
Volume Title
Publisher
Authors
Person
Research Projects
Organizational Units
Organizational Unit
Journal Issue
Is Version Of
Versions
Series
Department
Materials Science and Engineering
Abstract

Creep deformation and fracture behaviors were investigated on a deformation-processed Cu-Cr in-situ composite over a temperature range of 200 °C to 650 °C. It was found that the creep resistance increases significantly with the introduction of Cr fibers into Cu. The stress exponent and the activation energy for creep of the composite at high temperatures (≥400 °C) were observed to be 5.5 and 180 to 216 kJ/mol, respectively. The observation that the stress exponent and the activation energy for creep of the composite at high temperatures (≥400 °C) are close to those of pure Cu suggests that the creep deformation of the composite is dominated by the deformation of the Cu matrix. The high stress exponent at low temperatures (200 °C and 300 °C) is thought be associated with the as-swaged microstructure, which contains elongated dislocation cells and subgrains that are stable and act as strong athermal obstacles at low temperatures. The mechanism of damage was found to be similar for all the creep tests performed, but the distribution and extent of damage were found to be very sensitive to the test temperature.

Comments

This article is from Metallurgical and Materials Transactions A 35 (2004): 695, doi:10.1007/s11661-004-0380-5. Posted with permission.

Description
Keywords
Citation
DOI
Copyright
Thu Jan 01 00:00:00 UTC 2004
Collections