Location

La Jolla, CA

Start Date

1-1-1987 12:00 AM

Description

In recent years a variety of thermoacoustic techniques have been used to image surface and near surface features in ceramics. These include early gas cell methods [1] as well as the Scanning Electron Acoustic Microscopy (SEAM) technique [2] and more recently the Mirage or Optical Beam Deflection (OBD) methods [3,4]. In the gas cell and Mirage methods, the effect of the outgoing thermal wave on the air boundary at the sample surface is sensed, respectively, by a microphone and by a laser beam. In SEAM the specimen vibration or acoustic wave is sensed directly by a contacting transducer. The gas cell and Mirage methods generate pure thermal images but require long times to generate useful images of areas a few millimeters square. SEAM, on the other hand, is a high signal/noise technique due to the exceptional sensitivity of piezoelectrics and thus requires shorter imaging times. However, SEAM is sensitive to both the thermal wave signal and the local mechanical response of the specimen to the thermal wave and convolutes the two responses. The author has recently demonstrated that the entire image can be dominated by the mechanical response alone [5]. Thus SEAM image interpretation is considerably clearer for such cases. This thermomechanical mechanism is now fairly well understood and its analysis will be presented elsewhere. SEAM is thus an excellent method for imaging ceramics. Using Coordinate Modulation (CM) with SEAM 5mm x 5mm areas of ceramics have been imaged for surface and subsurface defects in 2 minutes. CM requires the electron beam to be dithered a small amount instead of being intensity modulated, the usual approach. This increases image contrast and will be described later.

Book Title

Review of Progress in Quantitative Nondestructive Evaluation

Volume

6B

Chapter

Chapter 6: Advanced Composites

Section

Defects

Pages

1231-1240

DOI

10.1007/978-1-4613-1893-4_140

Language

en

File Format

application/pdf

Share

COinS
 
Jan 1st, 12:00 AM

Photoacoustic Microscopy of Ceramics Using Laser Heterodyne Detection

La Jolla, CA

In recent years a variety of thermoacoustic techniques have been used to image surface and near surface features in ceramics. These include early gas cell methods [1] as well as the Scanning Electron Acoustic Microscopy (SEAM) technique [2] and more recently the Mirage or Optical Beam Deflection (OBD) methods [3,4]. In the gas cell and Mirage methods, the effect of the outgoing thermal wave on the air boundary at the sample surface is sensed, respectively, by a microphone and by a laser beam. In SEAM the specimen vibration or acoustic wave is sensed directly by a contacting transducer. The gas cell and Mirage methods generate pure thermal images but require long times to generate useful images of areas a few millimeters square. SEAM, on the other hand, is a high signal/noise technique due to the exceptional sensitivity of piezoelectrics and thus requires shorter imaging times. However, SEAM is sensitive to both the thermal wave signal and the local mechanical response of the specimen to the thermal wave and convolutes the two responses. The author has recently demonstrated that the entire image can be dominated by the mechanical response alone [5]. Thus SEAM image interpretation is considerably clearer for such cases. This thermomechanical mechanism is now fairly well understood and its analysis will be presented elsewhere. SEAM is thus an excellent method for imaging ceramics. Using Coordinate Modulation (CM) with SEAM 5mm x 5mm areas of ceramics have been imaged for surface and subsurface defects in 2 minutes. CM requires the electron beam to be dithered a small amount instead of being intensity modulated, the usual approach. This increases image contrast and will be described later.