Schedule

Subscribe to RSS Feed

1997
Wednesday, January 1st
12:00 AM

3-D Wave Propagation in Cylindrical Single Crystal Solid-Liquid Bodies

Section: Elastic Waves

Yichi Lu, University of Virginia
Haydn N. G. Wadley, University of Virginia

Brunswick, ME

12:00 AM

A Comparison of Three Techniques to Determine the Nonlinear Ultrasonic Parameter β

Section: Materials Characterization

D. C. Hurley, National Institute of Standards and Technology
W. T. Yost, National Aeronautics and Space Administration
E. S. Boltz, National Institute of Standards and Technology
C. M. Fortunko, National Institute of Standards and Technology

Brunswick, ME

12:00 AM

A Dipole Thermal Wave Source and Mirage Detection

Section: Thermal Waves

Yuesheng Lu, Wayne State University
P. K. Kuo, Wayne State University
L. D. Favro, Wayne State University
R. L. Thomas, Wayne State University

Brunswick, ME

12:00 AM

A Distinctive Featured Optimization Approach for ECT Probes

Section: Electromagnetic Probes

Z. Chen, The University of Tokyo
K. Miya, The University of Tokyo
M. Kurokawa, Mitsubishi Heavy Industries

Brunswick, ME

12:00 AM

A Fiber-Based Laser Ultrasonic System for Remote Inspection of Limited Access Components

Section: Laser Based Ultrasonics

Liu-Sheng Wang, Northwestern University
J. Scott Stechenrider, Cabot Corporation
Jan D. Achenbach, Northwestern University

Brunswick, ME

12:00 AM

A General Boundary Integral Equation Approach to Eddy Current Crack Modeling

Section: Eddy Currents

J. Chao, United Technologies Pratt and Whitney
Norio Nakagawa, Iowa State University
D. Raulerson, United Technologies Pratt and Whitney
J. Moulder, Iowa State University

Brunswick, ME

12:00 AM

A Linear Systems Approach to Laser Generation of Ultrasound in Composites

Section: Laser Based Ultrasonics

Todd W. Murray, Johns Hopkins University
Kevin C. Baldwin, Johns Hopkins University
James W. Wagner, Johns Hopkins Univeristy

Brunswick, ME

12:00 AM

A Method of Representing and Comparing Eddy Current Lissajous Patterns

Section: Eddy Currents

J. Jarmulak, TNO Institute of Applied Physics

Brunswick, ME

12:00 AM

A Model of Temporal Intensity Modulation for Laser Generated Ultrasound

Section: Laser Based Ultrasonics

Terry Sanderson, Georgia Institute of Technology
Dr. Charles Ume, Georgia Institute of Technology
Dr. Jacek Jarzynski, Georgia Institute of Technology

Brunswick, ME

12:00 AM

A Multiresolution Approach for Characterizing MFL Signatures from Gas Pipeline Inspections

Section: Signal Processing

K. Hwang, Iowa State University
S. Mandayam, Iowa State University
S. S. Udpa, Iowa State University
L. Udpa, Iowa State University
W. Lord, Iowa State University

Brunswick, ME

12:00 AM

A New Approach for Practical Two Dimensional Data Fusion Utilizing a Single Eddy Current Probe

Section: Signal Processing

M. Minachi, Iowa State University
S. S. Udpa, Iowa State University
L. Udpa, Iowa State University
J. Yim, Hyundai Electronics Industries Co., Ltd.

Brunswick, ME

12:00 AM

A New Instrument for the Detection of Fatigue Cracks under Airframe Rivets

Section: Electromagnetic

Buzz Wincheski, Analytical Services and Materials
Ron Todhunter, Analytical Services and Materials
John Simpson, Lockheed Engineering & Sciences Co.

Brunswick, ME

12:00 AM

A New Morphological Approach for Removing Speckle Noise and Emphasizing Defect Features in Ultrasonic Images

Section: Signal Processing

Young-Won Song, Iowa State University
Satish S. Udpa, Iowa State University

Brunswick, ME

12:00 AM

A New Project on Nondestructive Evaluation with High Temperature SQUIDS

Section: Electromagnetic Probes

G. Peluso, Istituto Nazionale per la Fisica della Materia
G. Pepe, Istituto Nazionale per la Fisica della Materia
A. Ruosi, Istituto Nazionale per la Fisica della Materia
A. Barone, Istituto Nazionale per la Fisica della Materia
P. Buonadonna, Ingegneria dei Materiali per la Produzione
R. Teti, Ingegneria dei Materiali per la Produzione
M. Valentino, Ingegneria dei Materiali per la Produzione
U. Klein, Ingegneria dei Materiali per la Produzione
C. Attanasio, Istituto Nazionale per la Fisica della Materia
L. Maritato, Istituto Nazionale per la Fisica della Materia
M. Salvato, Istituto Nazionale per la Fisica della Materia
C. Camerlingo, Istituto di Cibemetica del C.N.R.
S. Pagano, Istituto di Cibemetica del C.N.R.
M. Russo, Istituto di Cibemetica del C.N.R.
E. Sarnelli, Istituto di Cibemetica del C.N.R.
M. Prencipe, Consorzio Intecna

Brunswick, ME

12:00 AM

A Non-Destructive Evaluation Instrument for Axial Load Measurements

Section: Diagnostic

N. P. Vedula, ManTech Advanced Systems International, Inc.
C. Spyrakos, West Virginia University
P. Klinkhachorn, West Virginia University

Brunswick, ME

12:00 AM

A Novel Linear Array System for Inspection of Large Metal Surfaces

Section: Electromagnetic Probes

R. F. Mostafavi, University of Essex
D. Mirshekar-Syahkal, University of Essex

Brunswick, ME

12:00 AM

A Portable TV-Holography (ESPI) System for QNDE

Section: Optical Techniques

Wolf Schubert, Oldenburg Scientific Instruments, Inc.
John Gowan, Applied Optical System, Inc.
Frederick Rothwarf, Magnetics and NDE Consultant

Brunswick, ME

12:00 AM

A Self-Compensating Technique for the Characterization of a Layered Structure

Section: New Techniques

A. Cheng, Northwestern University
J. D. Achenbach, Northwestern University

Brunswick, ME

12:00 AM

A Study of Metallic Corrosion Using a Surface Acoustic Wave Sensor

Section: Optical Techniques

B. T. Marquis, University of Maine
D. J. Frankel, Univeristy of Maine
W. E. Bruehs, Eastman Kodak Co.
J. F. Vetelino, University of Maine

Brunswick, ME

12:00 AM

A Tensor Based Approach to the Ultrasonic Determination of Orientation Distribution

Section: Residual Stress and Texture

Ronald A. Kline, GE CRD Manufacturing Technology Laboratory

Brunswick, ME

12:00 AM

A Time-Resolved Line-Focus Acoustic Microscopy Technique for Surface-Breaking Crack Depth Determination

Section: New Techniques

W. Li, Northwestern University
J. D. Achenbach, Northwestern University
A. Cheng, Northwestern University

Brunswick, ME

12:00 AM

A Wave Splitting/Invariant Embedding Approach to an Ultrasonic Inverse Problem

Section: Elastic Waves

Paul Stucky, Iowa State University
William Lord, Iowa State University

Brunswick, ME

12:00 AM

A Waveguide Based Acoustic Microscope with Application to the Evaluation of Bone

Section: Ultrasonic

M. L. Peterson, Colorado State University
S. Srinath, Colorado State University
S. James, Colorado State University
R. W. Norrdin, Colorado State University

Brunswick, ME

12:00 AM

Accelerated Space-Time Modeling of Quasi-Longitudinal Waves in Austenitic Weld Structures

Section: Bonded Joints

Martin Spies, Fraunhofer-Institute for Nondestructive Testing
Michael Kröning, Fraunhofer-Institute for Nondestructive Testing

Brunswick, ME

12:00 AM

Acoustic Emission Monitoring of Fatigue Damage in Metals

Section: Acoustic Emission

I. M. Daniel, Northwestern University
J.-J. Luo, Northwestern University
C. G. Sifniotopoulos, Northwestern University
H.-J. Chun, Northwestern University

Brunswick, ME

12:00 AM

Acoustic Inspection of Coated Steel Bar in Reinforced Concrete Structure

Section: Construction Materials (Concrete, Timber)

Chih-Hung Chiang, Chaoyang Institute of Technology
Cho-Liang Tsai, National Yulin Institute of Technology

Brunswick, ME

12:00 AM

Acoustic Waves in a Piezoelectric Plate Immersed in a Conductive Fluid

Section: UT Guided Waves

Che-Hua Yang, Chang Gung College of Medicine and Technology

Brunswick, ME

12:00 AM

Acoustoelastic Response of Tungsten Fiber-Reinforced Kanthal Metal Matrix Composites Due to Thermal Loading

Section: Composites

G. G. Leisk, Tufts University
A. Saigal, Tufts University

Brunswick, ME

12:00 AM

Adhesive/Adherend Interlayer Property Measurement by Acoustic Microscopy

Section: Bonded Joints

B. D. Zeller, Imperial College
A. J. Kinloch, Imperial College
Peter Cawley, Imperial College
P. Zinin, University of Oxford
G. A. D. Briggs, University of Oxford
G. E. Thompson, University of Manchester
X. Zhou, University of Manchester

Brunswick, ME

12:00 AM

Advances in the Use of LTS and HTS SQUIDS in Electromagnetic NDE

Section: Electromagnetic Probes

C. Carr, University of Strathclyde
M. E. Walker, University of Strathclyde
D. Mc A. McKirdy, University of Strathclyde
U. Klein, University of Strathclyde
G. B. Donaldson, University of Strathclyde
A. McNab, University of Strathclyde
A. Cochran, University of Strathclyde

Brunswick, ME

12:00 AM

Alternative Approaches to the Validation of Nondestructive Testing Methods

Section: POD Considerations

S. Nickisch, Bundesanstalt für Materialforschung und -prüfung
C. Nockemann, Bundesanstalt für Materialforschung und -prüfung
G.-R. Tillack, Bundesanstalt für Materialforschung und -prüfung
J. Murphy, General Electric
D. Sturges, General Electric

Brunswick, ME

12:00 AM

An Eddy Current Model Based on Parametric Description of Induced Current Loops

Section: Eddy Currents

R. La, Commissariat à l’Energie Atomique
B. Benoist, Commissariat à l’Energie Atomique
B. De Barmon, Commissariat à l’Energie Atomique
R. Lengelle, University of Technology of Troyes
P. Gaillard, University of Technology of Troyes
J. Reuchet, Commissariat à l’Energie Atomique

Brunswick, ME

12:00 AM

An Example of the Use of Interdigital PVDF Transducers to Generate and Receive a High Order Lamb Wave Mode in a Pipe

Section: UT Fields and Probes

P. Wilcox, Imperial College
M. Castaings, Imperial College
R. Monkhouse, Imperial College
P. Cawley, Imperial College
M. Lowe, Imperial College

Brunswick, ME

12:00 AM

An Improved Technique for Determining the Equation of State of Concrete and Geological Materials

Section: Construction Materials (Concrete, Timber)

E. A. Lindgren, Industrial Quality, Inc.
A. D. Mazzatesta, Johns Hopkins University
M. Rosen, Johns Hopkins University
H. Sidhu, Wright Laboratory Armament Directorate
Y. Tu, Wright Laboratory Armament Directorate

Brunswick, ME

12:00 AM

An Impulse Radar Nondestructive Evaluation System

Section: Microwave NDE

Fu-Chiarng Chen, University of Illinois
Weng Cho Chew, University of Illinois

Brunswick, ME

12:00 AM

An Intelligent Electrical Time Domain Reflectometry System for the Detection and Characterisation of Fault Conditions in Posttensioning Ducts of Smart Concrete Structures

Section: Construction Materials (Concrete, Timber)

E. I. Okanla, University of Manchester Institute of Science and Technology
P. A. Gaydecki, University of Manchester Institute of Science and Technology
S. Manaf, University of Manchester Institute of Science and Technology
F. M. Burdekin, University of Manchester Institute of Science and Technology

Brunswick, ME

12:00 AM

An Inverse Method for Cracks Characterization from Ultrasonic Bscan Images

Section: Elastic Waves

M. Faur, Commissariat à l’Energie Atomique
O. Roy, Commissariat à l’Energie Atomique
Ph. Benoist, Commissariat à l’Energie Atomique
J. Oksman, Ecole Supérieure d’Electricité
Ph. Morisseau, Intercontrôle

Brunswick, ME

12:00 AM

Analysis and Correction of the Source Parameter Effects for Optimizing the Laser Ultrasonic Mechanical Characterization

Section: Laser Based Ultrasonics

A. Hammoutene, École Polytechnique de Montréal
F. Enguehard, École Polytechnique de Montréal
L. Bertrand, École Polytechnique de Montréal

Brunswick, ME

12:00 AM

Analysis of Time-Resolved Shearographic Methods with Controlled Thermal Stressing

Section: Optical Techniques

John L. Champion, Johns Hopkins University
James B. Spicer, Johns Hopkins University
Robert Osiander, Johns Hopkins University
Jane W. Spicer, Johns Hopkins University

Brunswick, ME

12:00 AM

Analysis of X-Ray Microtomographic Images to Measure Work of Fracture in Concrete

Section: Construction Materials (Concrete, Timber)

Edwin Nagy, University of Maine
Eric Landis, University of Maine

Brunswick, ME

12:00 AM

Analytical Approach to the Calculation of Three-Dimensional Transducers for the Acoustic Control Methods

Section: UT Fields and Probes

V. M. Shikchman, Rostov-on-Don University
S. V. Zakharova, Rostov-on-Don University

Brunswick, ME

12:00 AM

Anisotropic Materials Characterization Using Air-Coupled Ultrasound

Section: Materials Characterization

O. I. Lobkis, Iowa State University
Dale E. Chimenti, Iowa State University

Brunswick, ME

12:00 AM

Anisotropy of the Fracture Toughness in Aged Inconel 718

Section: Materials Characterization

G. Liu, Iowa State University
David K. Rehbein, Iowa State University
Otto Buck, Iowa State University

Brunswick, ME

12:00 AM

Application of Measurement Models to Specification of Ultrasonic Inspections

Section: Ultrasonic

Timothy A. Gray, Iowa State University

Brunswick, ME

12:00 AM

Application of the Pace System to the Analysis of Multitechnique NDT Data on a Power Plant Component

Section: Diagnostic

M. Mayos, EDF/DER/REME
A. Schumm, EDF/DER/REME
C. Soors, EDF/DER/REME
O. Vailhen, EDF/DER/REME
E. Fleuet, EDF/DER/SDM

Brunswick, ME

12:00 AM

Application of Ultrasonic Imaging Techniques for Evaluation of Equine Tendon Injury

Section: Biomedical Materials

Viren Amin, Iowa State University
Larry Booth, Iowa State University
Ronald A. Roberts, Iowa State University
Nam-Deuk Kim, Iowa State University

Brunswick, ME

12:00 AM

Applications of Pulse Phase Thermography

Section: Thermal Waves

X. Maldague, Université Laval, Quebec City
S. Marinetti, Université Laval, Quebec City
J.-P. Couturier, Université Laval, Quebec City

Brunswick, ME

12:00 AM

Applied Holographic Interferometry as a Nondestructive Method for the Dynamic and Modal Analysis of an Advanced Graphite-Epoxy Composite Structure

Section: New Techniques

Howard Fein, Polaris Research Group

Brunswick, ME

12:00 AM

Assessing Physical Characteristics of Concrete Using Digital Image Analysis of Polarized Light Micrographs

Section: Construction Materials (Concrete, Timber)

M. L. Scott, Virginia Tech
J. C. Duke Jr., Virginia Tech
R. L. Weyers, Virginia Tech

Brunswick, ME

12:00 AM

Automated Source Identification Using Modal Acoustic Emission

Section: Acoustic Emission

Steve Ziola, Digital Wave Corporation
Ian Searle, Boeing Defense & Space Group

Brunswick, ME

12:00 AM

Automated Ultrasonic Data Interpretation Developed through an Interactive 3D Environment

Section: New Techniques

I. H. Cornwell, University of Strathclyde
A. McNab, University of Strathclyde

Brunswick, ME

12:00 AM

Automatic Flaw Detection System for Eddy Current Inspection of Steam Generator Tubes

Section: Electromagnetic

Sheng-Fa Chuang, Iowa State University
John P. Basart, Iowa State University
John C. Moulder, Iowa State University

Brunswick, ME

12:00 AM

Automatic Procedure for Thermal NDE of Delaminations in CFRP by Using Neural Networks

Section: Signal Processing

S. Marinetti, Istituto per la Tecnica del Freddo
P. G. Bison, Istituto per la Tecnica del Freddo
E. Grinzato, Istituto per la Tecnica del Freddo
G. Manduchi, Consiglio Nazionale delle Ricerche

Brunswick, ME

12:00 AM

Automation of Electric Current Injection NDE by Neural Networks

Section: Signal Processing

C. Hall Barbosa, Pontifical Catholic University of Rio de Janeiro
A. C. Bruno, Pontifical Catholic University of Rio de Janeiro
M. Vellasco, Pontifical Catholic University of Rio de Janeiro
M. Pacheco, Pontifical Catholic University of Rio de Janeiro
C. S. Camerini, SEMEC

Brunswick, ME

12:00 AM

Barkhausen Noise and Eddy Current Microscopy (BEMI): Microscope Configuration, Probes and Imaging Characteristics

Section: Electromagnetic

J. Bender, Fraunhofer Institut Zerstörungsfreie Prüfverfahren

Brunswick, ME

12:00 AM

Basic Study of a New ECT Probe Using Uniform Rotating Direction Eddy Current

Section: Electromagnetic Probes

Kiyoshi Koyama, College of Industrial Technology
Hiroshi Hoshikawa, College of Industrial Technology

Brunswick, ME

12:00 AM

Beam Hardening and Scattering Correction for a Quantitative X-Ray Inspection of Fuel Rod Welds

Section: Radiation Techniques

F. Retraint, LETI (CEA — Technologies Avancées)
J. M. Dinten, LETI (CEA — Technologies Avancées)

Brunswick, ME

12:00 AM

Boundary Element Method Based Probe Design Model Validation

Section: Electromagnetic Probes

J. Chao, Pratt and Whitney
Norio Nakagawa, Iowa State University
D. Raulerson, Pratt and Whitney
J. Moulder, Iowa State University

Brunswick, ME

12:00 AM

C-Scan Mapping of Elastic Modulus in a Stepped Aluminum Bar Casting

Section: Techniques for Process Control

G. G. Leisk, Tufts University
A. Saigal, Tufts University

Brunswick, ME

12:00 AM

Calculation of Wideband Ultrasonic Fields Radiated by Immersed Transducers into Solids Through Curved Interfaces

Section: UT Fields and Probes

Alain Lhémery, CEREM
Pierre Calmon, CEREM
Michele Mephane, CEREM

Brunswick, ME

12:00 AM

Capability of Single-Sided Transient Thermographic Imaging Method for Detection of Flat Bottom Hole Defects in High-Temperature Composite Materials

Section: Composites

Don J. Roth, National Aeronautics and Space Administration
James R. Bodis, Cleveland State University
Clifford Bishop, Bales Scientific, Inc.

Brunswick, ME

12:00 AM

Case Depth Measurement Using Surface Acoustic Wave Velocity Dispersion

Section: Coatings and Layers

A. Safaeinili, Rockwell Science Center
A. D. W. McKie, Rockwell Science Center
R. C. Addison Jr., Rockwell Science Center

Brunswick, ME

12:00 AM

Cautions on the Use of Commercial Aqueous Cleaners in Fluorescent Penetrant Inspection Processes

Section: New Techniques

Ward D. Rummel, D & W Enterprises, Ltd.

Brunswick, ME

12:00 AM

Characteristics of Frequency Domain Spectrum of Self-Nulling Eddy Current Probe Output

Section: Electromagnetic Probes

M. Namkung, NASA Langley Research Center
S. Nath, Iowa State University
J. P. Fulton, General Electric Corporate Research and Development Center

Brunswick, ME

12:00 AM

Characterization and Interpretation of Ultrasonic Structural Echoes in Bimetallic Welds

Section: Bonded Joints

Clarisse Poidevin, Commissariat à l’Énergie Atomique
Faïza Ahmed, Commissariat à l’Énergie Atomique
Marc Serre, Commissariat à l’Énergie Atomique

Brunswick, ME

12:00 AM

Characterization of Biomaterials Using Magnetic Resonance Elastography

Section: Biomedical Materials

J. A. Smith, Mayo Clinic and Foundation
R. Muthupillai, Mayo Clinic and Foundation
P. J. Rossman, Mayo Clinic and Foundation
T. C. Hulshizer, Mayo Clinic and Foundation
J. F. Greenleaf, Mayo Clinic and Foundation
R. L. Ehman, Mayo Clinic and Foundation

Brunswick, ME

12:00 AM

Characterization of Coatings on Magnetic Metals Using Swept-Frequency Eddy Current and Transient Eddy Current Methods

Section: Coatings and Layers

Cheng-Chi Tai, Iowa State University
James H. Rose, Iowa State University
John C. Moulder, Iowa State University

Brunswick, ME

12:00 AM

Characterization of the Electromagnetic Field Generated by Eddy Current Probes

Section: Electromagnetic Probes

F. Thevenot, Dassault Aviation
M. Dessendre, Dassault Aviation
H. Tretout, Dassault Aviation

Brunswick, ME

12:00 AM

Characterization of Ultrasonic Focused Transducers Using Axial Scans and C-Scans

Section: UT Fields and Probes

I. Yalda, Iowa State University
P. D. Panetta, Iowa State University
Frank J. Margetan, Iowa State University
R. Bruce Thompson, Iowa State University

Brunswick, ME

12:00 AM

Characterizing Shear Wave Contact Transducers by Immersion Scanning

Section: UT Fields and Probes

David K. Hsu, Iowa State University
Vinay Dayal, Iowa State University
Brent A. Fischer, Iowa State University

Brunswick, ME

12:00 AM

Classification of Ultrasonic Weld Inspection Data Using Principal Component Analysis

Section: Signal Processing

Sangmin Bae, Iowa State University
Lalita Udpa, Iowa State University
Satish Udpa, Iowa State University
Tom Taylor, Electric Power Research Institute

Brunswick, ME

12:00 AM

Classification Strategy to Identify and Classify Common Cracks in Green-State Powdered Metallurgy Compacts

Section: Materials Characterization

D. C. Zenger, Worcester Polytechnic Institute
H. Cai, Worcester Polytechnic Institute
J. McNeill, Worcester Polytechnic Institute
R. Ludwig, Worcester Polytechnic Institute

Brunswick, ME

12:00 AM

Clearer ECT Flaw Image Utilizing CT Inversion Technique

Section: Image Analysis

Hiroshi Hoshikawa, Nihon University
Kiyoshi Koyama, Nihon University

Brunswick, ME

12:00 AM

Comparison of Two Electromagnetic Models for Microwave Surface Crack/Slot Detection Using Open-Ended Waveguides

Section: Microwave NDE

C. Huber, Colorado State University
M. L. Peterson, Colorado State University
J. Bourland, Colorado State University

Brunswick, ME

12:00 AM

Comparisons of the Behavior of Real and Imaginary Reluctances Between Samples of 6061 Aluminum as a Function of Grain Size

Section: Materials Characterization

William F. Schmidt, University of Arkansas
Otto H. Zinke, International Validators, Inc.

Brunswick, ME

12:00 AM

Complex-Reluctance Plane Behavior of Aluminum Samples

Section: Materials Characterization

Otto H. Zinke, International Validators, Inc.
William F. Schmidt, University of Arkansas

Brunswick, ME

12:00 AM

Computer Simulation of X-Ray NDE Process Coupled with CAD Interface

Section: Radiation Techniques

Carsten Bellon, Federal Institute for Materials Research and Testing
Gerd-Rudiger Tillack, Federal Institute for Materials Research and Testing
Christina Nockemann, Federal Institute for Materials Research and Testing
Lutz Stenzel, Federal Institute for Materials Research and Testing

Brunswick, ME

12:00 AM

Conebeam Microtomography Using a Fiberoptic Scintillator and a Lens-Coupled CCD Camera

Section: Penetrating Radiation

T. A. White, Idaho National Engineering Laboratory
T. J. Roney, Idaho National Engineering Laboratory
S. G. Galbraith, Idaho National Engineering Laboratory

Brunswick, ME

12:00 AM

Crack Signal Saturation in High Sensitivity ACFM Technique

Section: New Techniques

D. Mirshekar-Syahkal, University of Essex
R. F. Mostafavi, University of Essex

Brunswick, ME

12:00 AM

Damage Free Generation of Ultrasound by an Expanding Laser Produced Plasma

Section: New Techniques

S. Dixon, University of Warwick
C. Edwards, University of Warwick
S. B. Palmer, University of Warwick

Brunswick, ME

12:00 AM

Depth-Resolved Subsurface Defect Detection in Ceramics Using Optical Gating Techniques

Section: New Techniques

M. Bashkansky, Naval Research Laboratory
M. D. Duncan, Naval Research Laboratory
M. Kahn, Naval Research Laboratory
D. Lewis III, Naval Research Laboratory
J. Reintjes, Naval Research Laboratory

Brunswick, ME

12:00 AM

Design Considerations for the Remote Field Eddy Current Probe for Inspecting Ferromagnetic Flat Structures

Section: Electromagnetic Probes

S. Nath, Amtak, Inc.
Y. S. Sun, Amtak, Inc.
M. Mina, Amtak, Inc.

Brunswick, ME

12:00 AM

Detecting Cracks in Pipelines Using Ultrascan CD

Section: Pipes and Tubing

N. I. Uzelac, Pipetronix Ltd.
H. H. Willems, Pipetronix GmbH
O. A. Barbian, Pipetronix GmbH

Brunswick, ME

12:00 AM

Detection of Aircraft Component Defects Using Low Voltage Excitation of Ultrasonic Transducers

Section: UT Fields and Probes

J. P. Smith, British Aerospace Defence
L.-K Shark, University of Central Lancashire
T. J. Terrell, University of Central Lancashire

Brunswick, ME

12:00 AM

Determination and Monitoring of through Hole Diameters in Thin Plates Using Acoustic Diffraction

Section: Techniques for Process Control

Tobias P. Berndt, Johns Hopkins University
Robert E. Green Jr., Johns Hopkins University

Brunswick, ME

12:00 AM

Determining Bonding Quality in Polymer Composites with a Millimeter Wave Sensor

Section: Microwave NDE

S. Bakhtiari, Argonne National Laboratory
N. Gopalsami, Argonne National Laboratory
A. C. Raptis, Argonne National Laboratory

Brunswick, ME

12:00 AM

Development and Application of UT Models in Titanium Inspection Development

Section: UT Backscatter/Microstructure

R. Bruce Thompson, Iowa State University

Brunswick, ME

12:00 AM

Development and Field-Testing of a Hand-Held Ultrasonic Monitoring Device

Section: Construction Materials (Concrete, Timber)

P. Klinkhachorn, West Virginia University
S. Nomani, West Virginia University
S. Petro, West Virginia University
U. B. Halabe, West Virginia University
H. GrangaRao, West Virginia University
R. Franklin, West Virginia University

Brunswick, ME

12:00 AM

Development of a 3D Cone Beam Facility Dedicated to the Detection of Small Flaws in Large Si3N4 Parts

Section: Penetrating Radiation

Ph. Rizo, LETI
M. Antonakios, LETI
J. M. Casagrande, INTERCONTROLE
Th. Lhermitte, RENAULT
L. Garguet-Duport, RENAULT

Brunswick, ME

12:00 AM

Development of a Hand-Held, Flexible Eddy Current Probe for Inspection of Curving Surfaces

Section: Electromagnetic

T. Patton, GE Corporate Research and Development
R. Filkins, GE Corporate Research and Development
J. Fulton, GE Corporate Research and Development
K. Hedengren, GE Corporate Research and Development
J. Young, GE Corporate Research and Development
C. Granger, GE Aircraft Engines
T. Hewton, GE Aircraft Engines

Brunswick, ME

12:00 AM

Development of an Automated Lumber Processing System

Section: Diagnostic

Powsiri Klinkhachorn, West Virginia University
John Moody, West Virginia University
Vladimir Barnekov, Michigan State University
Henry Huber, Michigan State University

Brunswick, ME

12:00 AM

Development of Coating Thickness Instrument for Graphite/Epoxy Composites

Section: Coatings and Layers

P. L. Anderson, Boeing

Brunswick, ME

12:00 AM

Development of Ultrasonic Models for Hard-Alpha Inclusions in Titanium Alloys

Section: UT Backscatter/Microstructure

Chien-Ping Chiou, Iowa State University
Frank J. Margetan, Iowa State University
R. Bruce Thompson, Iowa State University
Brian Boyd, Iowa State University

Brunswick, ME

12:00 AM

Developments and Testing of the Dripless Bubbler Ultrasonic Scanner

Section: Ultrasonic

Daniel J. Barnard, Iowa State University
David K. Hsu, Iowa State University

Brunswick, ME

12:00 AM

Dielectric Mixing Models for Cement Based Materials

Section: Microwave NDE

Karl J. Bois, Colorado State University
Radin Mirshahi, Colorado State University
Reza Zoughi, Colorado State University

Brunswick, ME

12:00 AM

Disperse: A General Purpose Program for Creating Dispersion Curves

Section: UT Guided Waves

Brian Pavlakovic, Imperial College NDT Laboratory
Mike Lowe, Imperial College NDT Laboratory
David Alleyne, Imperial College NDT Laboratory
Peter Cawley, Imperial College NDT Laboratory

Brunswick, ME

12:00 AM

Dispersion Compensation in Acoustic Emission Pipeline Leak Location

Section: Acoustic Emission

Lance E. Rewerts, Iowa State University
Ron R. Roberts, Iowa State University
M. Amanda Clark, Iowa State University

Brunswick, ME

12:00 AM

Eddy Current Detection of Nucleation and Early Growth of Semiconductor Crystals

Section: Techniques for Process Control

Bill W. Choi, University of Virginia
Kumar P. Dharmasena, University of Virginia
Haydn N. G. Wadley, University of Virginia

Brunswick, ME

12:00 AM

Eddy Current Exam Simulation Using Coupled Finite Element/Volume Integral or Finite Element/Boundary Element Method

Section: Eddy Currents

Edith A. Creek, Southwest Research institute
Robert E. Beissner, Southwest Research Institute

Brunswick, ME

12:00 AM

Eddy Current Scanning for Testing Aircraft Structures; Requirements for Data Processing for an Application Spectrum from Riveted Al-Structures to Heat Damaged CFRP

Section: Electromagnetic Probes

Wolfgang J. Bisle, Daimler Benz Aerospace

Brunswick, ME

12:00 AM

Edge Weld Penetration Assessment via Electric Current Deflection Measurements

Section: Bonded Joints

Shaohai Chen, University of Cincinnati
Peter B. Nagy, University of Cincinnati

Brunswick, ME

12:00 AM

Effect of Rough Surfaces on Guided Waves in Plates

Section: UT Guided Waves

Dale E. Chimenti, Iowa State University
O. I. Lobkis, Iowa State University

Brunswick, ME

12:00 AM

Effects of Inherent Tissue Anisotropy on Measurements Obtained with a Clinical Ultrasonic Imaging System

Section: Biomedical Materials

Mark R. Holland, Washington University in St. Louis
Christopher S. Hall, Washington University in St. Louis
Stephen H. Lewis, Washington University in St. Louis
Scott M. Handley, Washington University in St. Louis
Ann E. Finch-Johnston, Washington University in St. Louis
Alwyn P. D'Sa, Hewlett-Packard Company
Julio E. Perez, Washington University in St. Louis
James G. Miller, Washington University in St. Louis

Brunswick, ME

12:00 AM

Effects of Stress on Magnetic Flux Leakage and Magnetic Barkhausen Noise Signals

Section: Residual Stress and Texture

D. L. Atherton, Queen's University
T. W. Krause, Queen's University
K. Mandal, Queen's University

Brunswick, ME

12:00 AM

Effects of Stress on the Magnetic Properties of Steels

Section: Residual Stress and Texture

David C. Jiles, Iowa State University

Brunswick, ME

12:00 AM

Elastodynamic Optical Theorem for the Evaluation of Scattering Cross-Sections for a Crack

Section: Elastic Waves

M. Kitahara, Tokai University
K. Nakagawa, UNITEC

Brunswick, ME

12:00 AM

Electric Resistivity Testing of Green-State Powdered Metallurgy Components

Section: Techniques for Process Control

J. Stander, Worcester Polytechnic Institute
J. Plunkett, Worcester Polytechnic Institute
D. Zenger, Worcester Polytechnic Institute
J. McNeill, Worcester Polytechnic Institute
R. Ludwig, Worcester Polytechnic Institute

Brunswick, ME

12:00 AM

Electromagnetic Microscope for Deep, Pulsed, Eddy Current Inspections

Section: Electromagnetic Probes

Walter Podney, SQM Technology
John Moulder, Iowa State University

Brunswick, ME

12:00 AM

Enhancement of B- and C-Scan Images of C-Sam with an Acoustic Matching Layer

Section: Image Analysis

Koichiro Kawashima, Nagoya Institute of Technology
Shigenori Ohta, Nagoya Institute of Technology
Tadahiro Mizutani, Nagoya Institute of Technology
Naoya Nishimura, Nagoya Institute of Technology
Isao Ishikawa, Hitachi Construction Machinery

Brunswick, ME

12:00 AM

Evaluation of ECT Signals Due to SG Tube Crack with Deposit

Section: Pipes and Tubing

Hiroyuki Fukutomi, Tohoku University
Toshiyuki Takagi, Tohoku University
Junji Tani, Tohoku University
Junri Shimone, Nuclear Engineering Ltd.
Yutaka Harada, Nuclear Engineering Ltd.
Gangzhu Chen, Japan Power Engineering and Inspection Corporation
Kenzo Miya, University of Tokyo

Brunswick, ME

12:00 AM

Evaluation of Java as an Internet Delivery Tool

Section: Diagnostic

S. J. Wormley, Iowa State University

Brunswick, ME

12:00 AM

Evaluation of Spot Welds by Various Techniques

Section: Bonded Joints

D. Utrata, Iowa State University
S. Piela, Parametrics, Inc.
S. Nath, Amtak, Inc.

Brunswick, ME

12:00 AM

Experiences in the Use of Guided Ultrasonic Waves to Scan Structures

Section: UT Guided Waves

R. Bruce Thompson, Iowa State University

Brunswick, ME

12:00 AM

Experimental and Theoretical Investigation of Interfacial Losses in Concrete with Laser Ultrasonics

Section: Laser Based Ultrasonics

Joseph O. Owino, Georgia Institute of Technology
Laurence J. Jacobs, Georgia Institute of Technology

Brunswick, ME

12:00 AM

Experimental Evaluation of Ultrasonic Simulation Techniques in Anisotropic Material

Section: New Techniques

F. Walte, IZFP
C. Schurig, IZFP
M. Spies, IZFP
K. J. Langenberg, TET University GHS Kassel
S. Klaholz, TET University GHS Kassel

Brunswick, ME

12:00 AM

Experimental Evidence of Single and Multiple Scattering in Polycrystalline Materials

Section: Materials Characterization

Mark D. Russell, University of Missouri–Columbia
Steven P. Neal, University of Missouri–Columbia

Brunswick, ME

12:00 AM

Experimental Studies on the Role of Backfill and Pipeline Characteristics in the Application of Acoustic Leak Location to Underground Pipelines

Section: Acoustic Emission

M. Amanda Clark, Iowa State University
Lance E. Rewerts, Iowa State University
Ron R. Roberts, Iowa State University

Brunswick, ME

12:00 AM

Experimental Verification of Kramers-Kronig Relationship in Anisotropic Composite Materials

Section: Composites

Bernard Hosten, Université Bordeaux I
Sandrine Baudouin, Université Bordeaux I

Brunswick, ME

12:00 AM

Explicit Formulae Showing the Effects of Texture on Acoustoelastic Coefficients

Section: Residual Stress and Texture

Chi-Sing Man, University of Kentucky
Roberto Paroni, University of Kentucky

Brunswick, ME

12:00 AM

Extreme Sensitivity of Eddy-Currents to the Surface Conditions of Nickel

Section: Eddy Currents

James H. Rose, Iowa State University
Cheng-Chi Tai, Iowa State University
John C. Moulder, Iowa State Univeristy

Brunswick, ME

12:00 AM

Factors Affecting Stress Concentrations Near Pit Defects, as Monitored by Magnetic Flux Leakage, Magnetic Barkhausen Noise, and Neutron Diffraction

Section: Residual Stress and Texture

L. Clapham, Queen's University
K. Mandal, Queen's University
T. W. Krause, Queen's University
D. L. Atherton, Queen's University

Brunswick, ME

12:00 AM

Fast Eddy Current Forward Models Using Artificial Neural Networks

Section: Eddy Currents

Bing Wang, Iowa State University
John P. Basart, Iowa State University
John C. Moulder, Iowa State University

Brunswick, ME

12:00 AM

Fatigue Failure Evaluation of Boron/Epoxy Patches Using Thermal Wave Imaging

Section: Composites

H. Aglan, Tuskegee University
C. Allen, Tuskegee University
T. Rowell, Tuskegee University
R. Elleithy, Tuskegee University
T. Ahmed, Wayne State University
R. Thomas, Wayne State University

Brunswick, ME

12:00 AM

Feasibility of Fatigue Crack Detection in Fluid-Filled Cylindrical Holes Using Circumferential Creeping Waves

Section: Elastic Waves

Waled Hassan, University of Cincinnati
Peter B. Nagy, University of Cincinnati

Brunswick, ME

12:00 AM

Field Measurements of Ultrasonic Stress in a Compressor Rotor

Section: Residual Stress and Texture

Don E. Bray, Texas A&M University
Wei Tang, Texas A&M University
Dilawar S. Grewal, Texas A&M University

Brunswick, ME

12:00 AM

Finite Element Modeling of Eddy Current Probes for Edge Effect Reduction

Section: Eddy Currents

Sarit Sharma, Iowa State University
Ibrahim Elshafiey, Iowa State University
Lalita Udpa, Iowa State University
Satish Udpa, Iowa State University

Brunswick, ME

12:00 AM

Finite Element Modeling of Eddy Current Testing of Steam Generator Tube with Crack and Deposit

Section: Eddy Currents

Toshiyuki Takagi, Tohoku University
Junji Tani, Tohoku University
Hiroyuki Fukutomi, Tohoku University
Mitsuo Hashimoto, Polytechnic University

Brunswick, ME

12:00 AM

Finite Element Modeling of Ultrasonic Waves in Viscoelastic Media

Section: Elastic Waves

Paul Stucky, Iowa State University
William Lord, Iowa State University

Brunswick, ME

12:00 AM

Flexible Interdigital PVDF Lamb Wave Transducers for the Development of Smart Structures

Section: UT Fields and Probes

R. S. C. Monkhouse, Imperial College
P. D. Wilcox, Imperial College
P. Cawley, Imperial College

Brunswick, ME

12:00 AM

Flexural Edge Waves Along Free and Immersed Elastic Waveguides

Section: UT Guided Waves

Jacques R. Chamuel, Sonoquest Advanced Ultrasonics Research

Brunswick, ME

12:00 AM

Fourier Holography for Enhanced Visualization of Volume Phase Objects through Exploitation of Non-Linearities Associated with Silver Halide Emulsions

Section: New Techniques

Kevin C. Baldwin, Johns Hopkins University
Michael J. Ehrlich, Johns Hopkins University
James W. Wagner, Johns Hopkins University

Brunswick, ME

12:00 AM

Frequency-Shifted Low-Noise Sagnac Sensor for Ultrasonic Measurements

Section: Ultrasonic

Pavel Fomitchov, Northwestern University
J. Scott Stechenrider, Northwestern University
Sridhar Krishnaswamy, Northwestern University
Jan D. Achenbach, Northwestern University

Brunswick, ME

12:00 AM

Generation of Diffuse Lamb Waves in Plates

Section: Acoustic Emission

Mark Evans, Imperial College
Peter Cawley, Imperial College

Brunswick, ME

12:00 AM

Genetic Algorithms for Inversion of Ultrasonic Data for the Elastic Constants Measurement in Orthotropic Material Systems

Section: Biomedical Materials

Navin S. Rao, Mississippi State University
Krishnan Balasubramaniam, Mississippi State University
Yuyin Ji, Mississippi State University

Brunswick, ME

12:00 AM

Glass Fiber Airplane Inspected with Infrared Lockin Thermography

Section: Thermal Waves

A. Salerno, Universität Stuttgart
D. Wu, Universität Stuttgart
G. Busse, Universität Stuttgart
U. Malter, K. Malter Air Service

Brunswick, ME

12:00 AM

Guided Wave Scattering by a Cylindrical Flaw

Section: UT Guided Waves

Liviu Singher, Israel Institute of Technology
Yitzhak Segal, Israel Institute of Technology
Joseph Shamir, Israel Institute of Technology

Brunswick, ME

12:00 AM

Guided Waves for the Inspection of Titanium Diffusion Bonds

Section: Bonded Joints

J. L. Rose, Pennsylvania State University
J. N. Barshinger, Pennsyvania State University
Masood Zaidi, McDonnell Douglas Aerospace

Brunswick, ME

12:00 AM

Guided Waves in a Fluid-Orthotropic Solid Bilayer

Section: Coatings and Layers

C. L. YApura, Texas A&M University
V. K. Kinra, Texas A&M University

Brunswick, ME

12:00 AM

High Resolution Laser Ultrasound Detection of Metal Defects

Section: Laser Based Ultrasonics

Peter W. Lorraine, General Electric Corporate Research and Development Center
Ralph A. Hewes, General Electric Corporate Research and Development Center
Denis Drolet, Industrial Materials Institute

Brunswick, ME

12:00 AM

HTS-SQUID Magnetometer with Digital Feedback Control for NDE Applications

Section: Electromagnetic

E. Zimmermann, ZEL
G. Brandenburg, ZEL
U. Clemens, ZEL
H. Rongen, ZEL
H. Halling, ZEL
H. -J. Krause, ISI
R. Hohmann, ISI
H. Soltner, ISI
D. Lomparski, ISI
M. Gruneklee, ISI
K. -D. Husemann, ISI
H. Bousack, ISI
A. I. Braginski, ISI

Brunswick, ME

12:00 AM

Identification and Measurement of Fiber Glass Particles in Electron Microscopy Using a High Order Correlation Process

Section: Materials Characterization

O. Yáñez-Suárez, Colorado State University
M. R. Azimi-Sadjadi, Colorado State University

Brunswick, ME

12:00 AM

Image Processing Techniques to Remove Depth Bias Effects in Magnetic Source Images of Deep Cracks

Section: Image Analysis

E. Andrade Lima, Pontifical Catholic University of Rio de Janeiro
A. C. Bruno, Pontifical Catholic University of Rio de Janeiro
J. Szczupak, Pontifical Catholic University of Rio de Janeiro

Brunswick, ME

12:00 AM

Imaging of Deep Internal Layers in Layered Polymer Systems Using the Ultra-Short Pulse Acoustic Microscope

Section: New Techniques

R. G. Maev, Russian Academy of Sciences
M. P. Pyshnyi, Russian Academy of Sciences
E. Yu Maeva, Russian Academy of Sciences
K. I. Maslov, Russian Academy of Sciences
V. M. Levin, Russian Academy of Sciences

Brunswick, ME

12:00 AM

Imaging Structure and Function in Medicine and Biology

Alan Berson, United States National Institutes of Health

Brunswick, ME

12:00 AM

Implementation of Self-Noise Suppression Techniques for Ultrasonic Correlation Systems

Section: New Techniques

Jahangir K. Kayani, Iowa State University
Steve F. Russell, Iowa State University
Samuel J. Wormley, Iowa State University

Brunswick, ME

12:00 AM

Improved Methodology for Predicting POD of Detecting Synthetic Hard Alpha Inclusions in Titanium

Section: POD Considerations

William Q. Meeker, Iowa State University
Shuen-Lin Jeng, Iowa State University
Chien-Ping Chiou, Iowa State University
R. Bruce Thompson, Iowa State University

Brunswick, ME

12:00 AM

Improvements on Low Cost CT Systems

Section: Penetrating Radiation

P. Basetty, Iowa State University
T. Jensen, Iowa State University
Joseph N. Gray, Iowa State University

Brunswick, ME

12:00 AM

INES: 3D Eddy Current Imaging for a Nondestructive Evaluation System Applied to Steam Generator Tubes

Section: Eddy Currents

R. Zorgati, EDF — Research & Development Division
V. Monebhurrun, CNRS-ESE - Plateau de Moulon
P. O. Gros, EDF — Research & Development Division
B. Duchêne, CNRS-ESE - Plateau de Moulon
D. Lesselier, CNRS-ESE - Plateau de Moulon
Ch. Chavant, EDF — Research & Development Division

Brunswick, ME

12:00 AM

Integrated Models of Ultrasonic Examination for NDT Expertise

Section: New Techniques

Pierre Calmon, CEREM
Alain Lhémery, CEREM
Isabelle Lecœur-Taïbi, CEREM
Raphaële Raillon, CEREM

Brunswick, ME

12:00 AM

Interaction of Acoustic Beams with Lossy Fluid-Loaded Layered, Cylindrical Shells

Section: Elastic Waves

Han Zhang, Iowa State University
Dale E. Chimenti, Iowa State University

Brunswick, ME

12:00 AM

Interaction of Lamb Waves with Defects in a Semi-Infinite Plate

Section: UT Guided Waves

Ajit Mal, University of California
Zensheu Chang, University of California
Michael Gorman, Digital Wave Corporation

Brunswick, ME

12:00 AM

Interferometric Detection of High Frequency Pulses of Ultrasound in Thin Coatings

Section: Coatings and Layers

C. J. Fiedler, United States Air Force
J. W. Wagner, Johns Hopkins University

Brunswick, ME

12:00 AM

Inversion of Eddy Current Data for Conductive Films and Coatings Thickness and Conductivity Measurement

Section: Coatings and Layers

B. de Halleux, Catholic University of Louvain
A. Ptchelintsev, Catholic University of Louvain

Brunswick, ME

12:00 AM

Investigation of the Anisotropic Nature of Laser Generated Ultrasound in HCP Crystals and Unidirectional Carbon Epoxy Composites

Section: Laser Based Ultrasonics

David H. Hurley, Johns Hopkins University
James B. Spicer, Johns Hopkins University
James W. Wagner, Johns Hopkins University
Todd W. Murray, Johns Hopkins University

Brunswick, ME

12:00 AM

Issues in the High Resolution Acoustoelastic Measurement of Stress

Section: Residual Stress and Texture

J. C. Johnson, Iowa State University
R. Bruce Thompson, Iowa State University

Brunswick, ME

12:00 AM

Kissing Bonds in Diffusion Bonded Parts

Section: Bonded Joints

J. O. Taylor, Rohr, Inc.

Brunswick, ME

12:00 AM

Laboratory Investigation of Higher Order Elastic Coefficients in Timber

Section: Construction Materials (Concrete, Timber)

M. L. Peterson, Colorado State University
C. Mittlestadt, Colorado State Univeristy
J. Downs III, Colorado State University

Brunswick, ME

12:00 AM

Lamb Waves from Microfractures in Composite Plates

Section: Acoustic Emission

Dawei Guo, University of California
Ajit Mal, University of California
Kanji Ono, University of California
Michael Gorman, Digital Wave Corporation

Brunswick, ME

12:00 AM

Laser Generated Bulk Waves in Plates

Section: Laser Based Ultrasonics

Terry Sanderson, Georgia Institute of Technology
Charles Ume, Georgia Institute of Technology
Jacek Jarzynski, Georgia Institute of Technology

Brunswick, ME

12:00 AM

Laser Generation and Detection of Lamb Waves in Graphite/Polymer Composite Laminates

Section: Composites

Yuqiao Yang, University of Delaware
James N. Caron, University of Delaware
James B. Mehl, University of Delaware
Karl V. Steiner, University of Delaware

Brunswick, ME

12:00 AM

Laser Shearography a Strain Imaging Video Camera for Comprehensive Nondestructive Inspection

Section: Electromagnetic

John Tyson II, 1055 W. Germantown Pike, Norristown, PA, 19403, USA

Brunswick, ME

12:00 AM

Laser-Based Ultrasound for the Inspection of Gas Pipelines

Section: Pipes and Tubing

R. C. Addison Jr., Rockwell Science Center
A. Safaeinili, Rockwell Science Center
A. D. W. McKie, Rockwell Science Center

Brunswick, ME

12:00 AM

Live Demonstration of Echocardiography

Samuel A. Wickline, Washington University
Mark R. Holland, Washington University
James G. Miller, Washington University

Brunswick, ME

12:00 AM

Localization of the Crystallographic Directions of Composite Materials from Wavespeed Measurements

Section: Composites

Christophe Aristégui, Université Bordeaux I
Stéphane Baste, Université Bordeaux I

Brunswick, ME

12:00 AM

Lock-In Thermal Wave Imaging

Section: Thermal Waves

Zhong Ouyang, Wayne State University
Li Wang, Wayne State University
Xun Wang, Wayne State University
Feng Zhang, Wayne State University
L. D. Favro, Wayne State Unviersity
P. K. Kuo, Wayne State University
R. L. Thomas, Wayne State University

Brunswick, ME

12:00 AM

Macroscopic Roughness Determination of Conductive Surfaces by Millimeter Wave Speckle Contrast Measurements

Section: Microwave NDE

Douglas A. Oursler, Johns Hopkins University
James W. Wagner, Johns Hopkins University

Brunswick, ME

12:00 AM

Mapping the Dielectric Properties of Lossy Materials in Situ

Section: Microwave NDE

M. J. Werner, KDC Technology Corp.
R. J. King, KDC Technology

Brunswick, ME

12:00 AM

Materials Characterization Using High-Frequency Atomic Force Microscopy and Friction Force Microscopy

Section: Materials Characterization

V. Scherer, Fraunhofer Institute for Nondestructive Testing
K. Janser, Fraunhofer Institute for Nondestructive Testing
U. Rabe, Fraunhofer Institute for Nondestructive Testing
W. Arnold, Fraunhofer Institute for Nondestructive Testing
O. Meissner, Fraunhofer Institute for Nondestructive Testing

Brunswick, ME

12:00 AM

Mathematical Modeling of Laser Ablation in Liquids with Application to Laser Ultrasonics

Section: Laser Based Ultrasonics

R. J. Conant, Montana State University
S. E. Garwick, Montana State University

Brunswick, ME

12:00 AM

Measurement of Acoustoelastic Coefficient with Leaky Surface Wave

Section: Residual Stress and Texture

Koichiro Kawashima, Nagoya Institute of Technology
Ikuya Fujii, Nagoya Institute of Technology
Takeshi Sato, Nagoya Institute of Technology
Motohiro Okade, Aisin Seiki Co.

Brunswick, ME

12:00 AM

Measurement of Anisotropic Elastic Constants of Sandwiched SiC/Ti Composite by Double Transmission, Critical Angle and Leaky Surface Wave Techniques

Section: Composites

Koichiro Kawashima, Nagoya Institute of Technology
Ikuya Fujii, Nagoya Institute of Technology
Akihiro Yamamoto, Nagoya Institute of Technology
Yoshiyuki Shimizu, Nagoya Institute of Technology
Akira Fukushima, Mitsubishi Heavy Industries Co., Ltd.

Brunswick, ME

12:00 AM

Measurement of Thickness and Elastic Properties of Electroactive Polymer Films Using Plate Wave Dispersion Data

Section: Coatings and Layers

Anter El-Azab, University of California, Los Angeles
Ajit K. Mal, University of California, Los Angeles
Yoseph Bar-Cohen, California Institute of Technology
Shyh-Shiuh Lih, California Institute of Technology

Brunswick, ME

12:00 AM

Measurement of Tissue Elasticity Using Magnetic Resonance Elastography

J. F. Greenleaf, Mayo Clinic and Mayo Foundation
R. Muthupillai, Mayo Clinic and Mayo Foundation
P. J. Rossman, Mayo Clinic and Mayo Foundation
D. J. Lomas, Mayo Clinic and Mayo Foundation
S. J. Riederer, Mayo Clinic and Mayo Foundation
R. L. Ehman, Mayo Clinic and Mayo Foundation

Brunswick, ME

12:00 AM

Measuring Porosity Using Sound Velocity in Phosphate Bonded Silicon Nitride

Section: Materials Characterization

J. A. Medding, Virginia Polytechnic Institute and State University
J. C. Duke Jr., Virginia Polytechnic Institute and State University

Brunswick, ME

12:00 AM

Method for Investigating the Spectral Characteristics of Corroded Metal

Section: New Techniques

K. D. Bennett, Lafayette College
A. R. Steslow, Lafayette College

Brunswick, ME

12:00 AM

Methods for Increasing the Resolution of Holographic Interferometry

Section: Optical Techniques

Kevin C. Baldwin, Johns Hopkins University
James W. Wagner, Johns Hopkins University

Brunswick, ME

12:00 AM

Micromagnetic Changes in Steel Due to Surface Modification

Section: Materials Characterization

A. P. Parakka, Iowa State University
David C. Jiles, Iowa State University
H. Gupta, University of Connecticut
M. Zang, University of Connecticut

Brunswick, ME

12:00 AM

Microstructural Characterization of Materials by a Rayleigh Wave Analysis

Section: Materials Characterization

F. Tardy, Commissariat à l'énergie atomique
M. H. Nadal, Commissariat à l'énergie atomique
C. Gondard, Commissariat à l'énergie atomique
L. Paradis, Commissariat à l'énergie atomique
P. Guy, Institut national des sciences appliquées
J. C. Baboux, Institut national des sciences appliquées

Brunswick, ME

12:00 AM

Mobile HTS SQUID System for Eddy Current Testing of Aircraft

Section: Electromagnetic Probes

H.-J. Krause, ISI, Forschungszentrum Jülich GmbH (KFA)
R. Hohmann, ISI, Forschungszentrum Jülich GmbH (KFA)
H. Soltner, ISI, Forschungszentrum Jülich GmbH (KFA)
D. Lomparski, ISI, Forschungszentrum Jülich GmbH (KFA)
M. Gruneklee, ISI, Forschungszentrum Jülich GmbH (KFA)
M. Banzet, ISI, Forschungszentrum Jülich GmbH (KFA)
J. Schubert, ISI, Forschungszentrum Jülich GmbH (KFA)
W. Zander, ISI, Forschungszentrum Jülich GmbH (KFA)
Y. Zhang, ISI, Forschungszentrum Jülich GmbH (KFA)
W. Wolf, ISI, Forschungszentrum Jülich GmbH (KFA)
H. Bousack, ISI, Forschungszentrum Jülich GmbH (KFA)
A. I. Braginski, ISI, Forschungszentrum Jülich GmbH (KFA)
M. L. Lucia, Universidad Complutense
E. Zimmermann, Forschungszentrum Jülich GmbH (KFA)
G. Brandenburg, Forschungszentrum Jülich GmbH (KFA)
U. Clemens, Forschungszentrum Jülich GmbH (KFA)
H. Rongen, Forschungszentrum Jülich GmbH (KFA)
H. Halling, Forschungszentrum Jülich GmbH (KFA)
M. I. Faley, Forschungszentrum Jülich GmbH (KFA)
U. Poppe, Forschungszentrum Jülich GmbH (KFA)
H. Buschmann, Institut für Luft- und Kältetechnik
G. Sporl, Institut für Luft- und Kältetechnik
A. Binneberg, Institut für Luft- und Kältetechnik

Brunswick, ME

12:00 AM

Modal Acoustic Emission Monitoring of Helicopter Rotor System Dynamic Components During Bench Fatigue Tests

Section: Techniques for Process Control

Matt Cawthorne, Boeing Defense and Space Group
Steve Ziola, Digital Wave Corporation

Brunswick, ME

12:00 AM

Mode Conversion of Guided Waves by Defects in Pipes

Section: Pipes and Tubing

Michael Lowe, Imperial College
David N. Alleyne, Imperial College
Peter Cawley, Imperial College

Brunswick, ME

12:00 AM

Mode Theory of the Nonspecular Reflection Phenomena of a Gaussian Ultrasonic Beam Incident onto an Elastic Plate

Section: UT Guided Waves

Xiaoping Jia, Universités Paris

Brunswick, ME

12:00 AM

Model-Based Signal Processing for Laser Ultrasonic Signal Enhancement

Section: Signal Processing

R. D. Huber, Lawrence Livermore National Laboratory
D. J. Chinn, Lawrence Livermore National Laboratory
G. H. Thomas, Lawrence Livermore National Laboratory
J. V. Candy, Lawrence Livermore National Laboratory
J. B. Spicer, Johns Hopkins University

Brunswick, ME

12:00 AM

Modeling the Propagation of Bounded Beams Through Curved Interfaces

Section: UT Fields and Probes

Lester W. Schmerr Jr., Iowa State University
Terence P. Lerch, Iowa State University
Alexander Sedov, Lakehead University

Brunswick, ME

12:00 AM

Monitoring of Fatigue Damage in Pure Copper with Electromagnetic Acoustic Resonance

Section: Materials Characterization

Toshihiro Ohtani, Ebara Research Co., Ltd.
Hirotsugu Ogi, Osaka University
Masahiko Hirao, Osaka University

Brunswick, ME

12:00 AM

Multi Step 3D X-Ray Tomography for a Limited Number of Projections and Views

Section: Radiation Techniques

Valery L. Vengrinovich, Institute of Applied Physics of Belarussian Academy of Science
Yuri B. Denkevich, Institute of Applied Physics of Belarussian Academy of Science
Gerd-Rudiger Tillack, Federal Institute for Materials Research and Testing
Christina Nockemann, Federal Institute for Materials Research and Testing

Brunswick, ME

12:00 AM

NDE of Aging Aircraft Structure Using Orthogonal-Axis Eddy Current Probes

Section: Electromagnetic Probes

Gary L. Burkhardt, Southwest Research institute
Jay L. Fisher, Southwest Research Institute
Jeffrey S. Stolte, Southwest Research Institute
Steven R. Kramer, Raytheon E-Systems
Kevin L. Cobble, Raytheon E-Systems

Brunswick, ME

12:00 AM

Neural Network Inversion for Thickness Measurements and Conductivity Profiling

Section: Signal Processing

G. Katragadda, Karta Technology, Inc.
J. Wallace, Karta Technology Inc.
J. Lee, Karta Technology, Inc.
S. Nair, Karta Technology, Inc.

Brunswick, ME

12:00 AM

Neuro-Fuzzy Systems in Ultrasonic Weld Evaluation

Section: Signal Processing

G. Katragadda, Karta Technology, Inc.
S. Nair, Karta Technology Inc.
G. P. Singh, Karta Technology, Inc.

Brunswick, ME

12:00 AM

New Method for Estimating the Depth of Small Surface-Breaking Cracks from Photo Inductive Data

Section: Eddy Currents

Ananth Sethuraman, Iowa State University
James H. Rose, Iowa State University

Brunswick, ME

12:00 AM

Non-Axisymmetric Guided Waves for Tubing Inspection

Section: Pipes and Tubing

Hyeon Jae Shin, Pennsylvania State University
Michael J. Quarry, Pennsyvania State University
Joseph L. Rose, Pennsylvania State University

Brunswick, ME

12:00 AM

Noncontact Lifetime Reconstruction in Continuously Inhomogeneous Semiconductors: Generalized Theory and Experimental Photothermal Results for Ion-Implanted Si

Section: Thermal Waves

Alex Salnick, University of Toronto
Andreas Mandelis, University of Toronto
Andreas Othonos, University of Cyprus
Constantinos Christofides, University of Cyprus

Brunswick, ME

12:00 AM

Noncontacting Photothermal Radiometry of MOS Capacitor Structures: The Frequency-Domain and DLTS Approaches

Section: Electromagnetic

Alex Salnick, University of Toronto
Andreas Mandelis, University of Toronto
Claude Jean, MITEL

Brunswick, ME

12:00 AM

Nondestructive Evaluation of Coatings

Section: Coatings and Layers

A. Abbate, United States Army
J. F. Cox, United States Army
S. C. Schroeder, United States Army
B. Knight, United States Army
J. Frankel, United States Army

Brunswick, ME

12:00 AM

Nondestructive Evaluation of Field Welded Butt Joint of Thick Steel Plate by Synthetic Aperture

Section: Bonded Joints

Hiromi Shirahata, Tokyo Institute of Technology
Chitoshi Miki, Tokyo Institute of Technology
Masakatsu Shirozaki, Tokyo Institute of Technology

Brunswick, ME

12:00 AM

Nondestructive Evaluation of Surface Properties of Sintered Si3N4 Ceramics with Surface Wave Dispersion

Section: Materials Characterization

Motohiro Okade, Aisin Seiki Co., Ltd.
Koichiro Kawashima, Nagoya Institute of Technology
Takeshi Satoh, Nagoya Institute of Technology
Ikuya Fujii, Nagoya Institute of Technology
Yasushi Ikeda, Japan Fine Ceramic Center

Brunswick, ME

12:00 AM

Nondestructive Magnetic Measurement of Biaxial Stress Using Magnetic Fields Parallel and Perpendicular to the Stress Plane

Section: Residual Stress and Texture

M. J. Sablik, Southwest Research Institute
R. A. Langman, University of Tasmania
A. Belle, University of Tasmania

Brunswick, ME

12:00 AM

Nondestructive Testing for Environmental Degradation of Adhesive Joints

Section: Bonded Joints

K. Vine, Imperial College
Peter Cawley, Imperial College
A. J. Kinloch, Imperial College

Brunswick, ME

12:00 AM

Numerical Modeling and Imaging of Three-Dimensional Transducer Fields in Anisotropic Materials

Section: UT Fields and Probes

Martin Spies, Fraunhofer-Institute for Nondestructive Testing
N. K. Batra, Naval Research Laboratory
K. E. Simmonds, Naval Research Laboratory
R. B. Mignogna, Naval Research Laboratory

Brunswick, ME

12:00 AM

Numerical Modeling and Imaging with ULIAS: Ultrasonic Inspection Applying Simulation

Section: New Techniques

R. Marklein, University of Kassel
K. Mayer, University of Kassel
K. J. Langenberg, University of Kassel

Brunswick, ME

12:00 AM

Numerical Modeling of Eddy Current Steam Generator Inspection: Comparison with Experimental Data

Section: Eddy Currents

P. O. Gros, Electricité de France

Brunswick, ME

12:00 AM

Object Pose Estimation Using a Set of Local Radiographs of a Part and Its CAD Model

Section: Image Analysis

A. Koenig, Technologies Avancées
A. Glière, Technologies Avancées
P. Rizo, Technologies Avancées
B. Bell, Sowerby Research Centre
B. Paul, Sowerby Research Centre
J. Anderson, Sowerby Research Centre

Brunswick, ME

12:00 AM

Observation and Interpretation of Microstructurally Induced Fluctuations of Back-Surface Signals and Ultrasonic Attenuation in Titanium Alloys

Section: UT Backscatter/Microstructure

P. D. Panetta, Iowa State University
Frank J. Margetan, Iowa State University
Isaac Yalda, Iowa State University
R. Bruce Thompson, Iowa State University

Brunswick, ME

12:00 AM

On a Ray Method for Studying Diffraction of Waves Emitted by a Planar Transducer Within a Solid Conical-Shaped Medium

Section: UT Fields and Probes

C. Dumas, ONERA

Brunswick, ME

12:00 AM

Optical Detection of Ultrasound by Two-Wave Mixing in Photorefractive Semiconductor Crystals Under Applied Field

Section: Laser Based Ultrasonics

A. Blouin, National Research Council of Canada
P. Delaye, National Research Council of Canada
D. Drolet, National Research Council of Canada
J. P. Monchalin, National Research Council of Canada

Brunswick, ME

12:00 AM

Optical Strain Gauge for High Temperature Plastic Deformation Measurement

Section: Materials Characterization

L. M. Rizzi, CISE Tecnologie Innovative
P. Delvò, CISE Tecnologie Innovative
S. Ghia, Ente Nazionale per l'energia ELettrica

Brunswick, ME

12:00 AM

Optical Techniques to Develop Transfer Functions to Remove Geometric Features in Acoustic Emission Signals

Section: Acoustic Emission

Stefan Hurlebaus, Georgia Institute of Technology, Atlanta
Laurence J. Jacobs, Georgia Institute of Technology, Atlanta
Jacek Jarzynski, Georgia Institute of Technology, Atlanta

Brunswick, ME

12:00 AM

Optimization of Self-Nulling Eddy Current Probe for the Detection of Shallow Fatigue Cracks

Section: Electromagnetic Probes

Buzz Wincheski, Analytical Services and Materials
Shridhar Nath, Iowa State University
Sarit Sharma, Lockheed Engineering & Sciences Co.
John Simpson, Lockheed Engineering & Sciences Co.

Brunswick, ME

12:00 AM

Optimizing the Design of Multilayer Eddy Current Probes — A Theoretical and Experimental Study

Section: Electromagnetic Probes

J. P. Fulton, General Electric Corporate Research and Development Center
K. H. Hedengren, General Electric Corporate Research and Development Center
J. D. Young, General Electric Corporate Research and Development Center
R. Filkins, General Electric Corporate Research and Development Center
T. C. Patton, General Electric Corporate Research and Development Center

Brunswick, ME

12:00 AM

Parametric Imaging of Surface Hardness Using Barkhausen Technique

Section: Materials Characterization

A. P. Parakka, Iowa State University
David C. Jiles, Iowa State University

Brunswick, ME

12:00 AM

Phase Correction for Ultrasonic Bulk Wave Measurements of Elastic Constants in Anisotropic Materials

Section: Materials Characterization

A. I. Lavrentyev, Ohio State University
S. I. Rokhlin, Ohio State University

Brunswick, ME

12:00 AM

Prediction of Eddy-Current Probe Impedance Due to Surface Cracks in Ferromagnetic Steels

Section: Eddy Currents

N. Harfield, University of Surrey
John R. Bowler, Iowa State University

Brunswick, ME

12:00 AM

Preliminary Results for a Multi-Sensor Non-Destructive Test of Timber Strength

Section: New Techniques

M. L. Peterson, Colorado State University
D. Maas, Colorado State Univeristy
C. Mittlestadt, Colorado State University
S. Srinath, Colorado State University
R. Zoughi, Colorado State University

Brunswick, ME

12:00 AM

Probability of Detection Model for Pipeline Inspection

Section: Pipes and Tubing

Zuorong Zhang, Iowa State University
Yue Zhang, Iowa State University
Lalita Udpa, Iowa State University
Satish S. Udpa, Iowa State University

Brunswick, ME

12:00 AM

Probability of Visual Crack Detection from Japanese Maintenance Data

Section: POD Considerations

John Brewer, Volpe National Transportation Systems Center
Peter Mengert, Volpe National Transportation Systems Center
Robert DiSario, Volpe National Transportation Systems Center

Brunswick, ME

12:00 AM

Progress in Eddy Current Modeling via the Boundary Element Method

Section: Eddy Currents

Norio Nakagawa, Iowa State University
S. Ghanekar, Iowa State University
D. Lehther, Iowa State University
Y Liu, Iowa State University
J. C. Moulder, Iowa State University
A. N. S. Prasad, Iowa State University
F. Rizzo, Iowa State University
J. C. Chao, Pratt & Whitney

Brunswick, ME

12:00 AM

Progress Towards a Fiber-Based Laser-Ultrasonics System for Rapid NDE of Large-Area Composites

Section: Laser Based Ultrasonics

A. D. W. McKie, Rockwell Science Center
R. C. Addison Jr., Rockwell Science Center

Brunswick, ME

12:00 AM

Quantitative Acoustic Emission and the Fracture of Concrete

Section: Acoustic Emission

Eric Landis, University of Maine
Surendra P. Shah, Northwestern University

Brunswick, ME

12:00 AM

Quantitative Evaluation of Thermally Induced Residual Sttresses in White Cast Iron and Steels with Different Cementite Morphologies

Section: Coatings and Layers

I. Altpeter, Fraunhofer Institut Zerstörungsfreie Prüfverfahren
R. Kern, Fraunhofer Institut Zerstörungsfreie Prüfverfahren
M. Lang, Fraunhofer Institut Zerstörungsfreie Prüfverfahren

Brunswick, ME

12:00 AM

Quantitative Fracture Mode Analysis of Composites by Acoustic Emission

Section: Acoustic Emission

M. Enoki, University of Tokyo
H. Fujita, Univeristy of Tokyo
T. Kishi, University of Tokyo

Brunswick, ME

12:00 AM

Quantitative Near Field Imaging with Multi-Detector Waveguide

Section: Microwave NDE

R. Steegmüller, Universität Stuttgart
L. Diener, Universität Stuttgart

Brunswick, ME

12:00 AM

Quantitative Thermal Wave Imaging of Corrosion on Aircraft

Section: Thermal Waves

Xiaoyan Han, Wayne State University
L. D. Favro, Wayne State University
Tasdiq Ahmed, Wayne State University
Zhong Ouyang, Wayne State University
Li Wang, Wayne State University
Xun Wang, Wayne State University
Feng Zhang, Wayne State University
P. K. Kuo, Wayne State University
R. L. Thomas, Wayne State Univeristy

Brunswick, ME

12:00 AM

Rayleigh Wave Dispersion Due to One-Dimensional Interacting Cracks

Section: UT Guided Waves

C. Pecorari, Oxford University

Brunswick, ME

12:00 AM

Recent Developments in Eddy-Current Modeling

Section: Eddy Currents

Harold A. Sabbagh, Sabbagh Associates, Inc.
R. Kim Murphy, Sabbagh Associates, Inc.
Anthony Chan, Sabbagh Associates, Inc.
Elias H. Sabbagh, Sabbagh Associates, Inc.
Lai Wan Woo, Sabbagh Associates, Inc.
Michael C. Warnes, Nuclear Electric Ltd.

Brunswick, ME

12:00 AM

Recent Developments of Eddy Current Inspection Simulator

Section: Electromagnetic Probes

Norio Nakagawa, Iowa State University
M. Garton, Iowa State University
J. C. Moulder, Iowa State University
J. H. Rose, Iowa State University
J. Xu, Iowa State University

Brunswick, ME

12:00 AM

Resonant Scattering of an Elastic Wave by a Layer Containing a Random or Periodic Distribution of Inclusions

Section: Elastic Waves

V. K. Kinra, Texas A&M University
K. Maslov, Texas A&M University
B. K. Henderson, Texas A&M University
N. Day, Texas A&M University
G. Diderich, Texas A&M University

Brunswick, ME

12:00 AM

Response of a Focused Transducer Facing a Rigid Reflector

Section: UT Fields and Probes

Martin G. Manley, National Institute of Standards and Technology
Nelson N. Hsu, National Institute of Standards and Technology

Brunswick, ME

12:00 AM

Robust Laser-Based Ultrasound Sensor Using Integrated Photo-Induced EMF Detection and Time-Delay Interferometer

Section: Laser Based Ultrasonics

G. J. Dunning, Hughes Research Laboratories
D. M. Pepper, Hughes Research Laboratories
M. P. Chiao, Hughes Research Laboratories
P. V. Mitchell, Melles Griot
J. W. Wagner, Johns Hopkins University
F. M. Davidson, Johns Hopkins University

Brunswick, ME

12:00 AM

Rupture Pressure Prediction for Composite High Pressure Tanks Using Acoustic Emission

Section: Acoustic Emission

J.-C. Anifrani, Aérospatiale
C. Le Floc'h, Aérospatiale
D. Sornette, Laboratoire de Physique de la Matière Condensée
B. Souillard, X-RS
C. Vanneste, X-RS

Brunswick, ME

12:00 AM

Self-Focusing and Defect Characterization with the Faust System

Section: Ultrasonic

S. Mahaut, IPSN/DES/SAMS
G. Cattiaux, IPSN/DES/SAMS
O. Roy, CEA/CEREM
Ph. Benoist, CEA/CEREM

Brunswick, ME

12:00 AM

Self-Focusing Surface Wave Array

Section: Ultrasonic

W. A. K. Deutsch, Northwestern University
A. Cheng, Northwestern University
J. D. Achenbach, Northwestern University

Brunswick, ME

12:00 AM

Sensitivity Analysis of the Ultrasonic Response from a Non-Normal Surface-Breaking Crack

Section: Elastic Waves

A. Minachi, Iowa State University
Frank J. Margetan, Iowa State University
R. Bruce Thompson, Iowa State University
M. S. Greenwood, Pacific Northwest Laboratory

Brunswick, ME

12:00 AM

Sensitivity of an Embedded Fiber Optic Ultrasound Sensor

Section: Optical Techniques

John Ddorighi, Northwestern University
Sridhar Krishnaswamy, Northwestern University
Jan D. Achenbach, Northwestern University

Brunswick, ME

12:00 AM

Shear Wave Ultrasonic Technique as an NDE Tool for Composite Laminates Before and After Curing

Section: Techniques for Process Control

D. K. Hsu, Iowa State University
Brent A. Fischer, Iowa State University
Melanie Koskamp, Iowa State University

Brunswick, ME

12:00 AM

Simulation of Scattering Process in Radiation Techniques Exploiting the Theory of Markovian Processes with Random Structure

Section: Radiation Techniques

Gerd-Rudiger Tillack, Federal Institute for Materials Research and Testing
Carsten Bellon, Federal Institute for Materials Research and Testing
Valentin M. Artemiev, Laboratory of Adaptive Control Problems
Alexander O. Naumov, Laboratory of Adaptive Control Problems

Brunswick, ME

12:00 AM

Simultaneous Inversion of Six Parameters for Three-Layered Metal Specimens

Section: Materials Characterization

C. L. Yapura, Texas A&M University
K. I. Maslov, Texas A&M University
V. K. Kinra, Texas A&M University

Brunswick, ME

12:00 AM

Slot Resonators for Characterization of Dielectrics at Microwave Frequencies

Section: Microwave NDE

H. G. Akhavan, University of Essex
D. Mirshekar-Syahkal, University of Essex

Brunswick, ME

12:00 AM

Solid-Liquid Interface Reconstructions Using Laser Ultrasonic Fan-Beam Projection Data

Section: Materials Characterization

Douglas T. Queheillalt, University of Virginia
Haydn N. G. Wadley, University of Virginia

Brunswick, ME

12:00 AM

Stress Effect on Ultrasonic Wave Propagation Through the Solid-Solid and Liquid-Solid Plane Interface

Section: Residual Stress and Texture

A. D. Degtyar, Ohio State University
S. I. Roklin, Ohio State University

Brunswick, ME

12:00 AM

Surface Response of an Anisotropic Laminate to Acoustic Emission Sources

Section: Acoustic Emission

E. Rhian Green, Leicester University

Brunswick, ME

12:00 AM

Texture Analysis Using Multiresolution Analysis for Ultrasound Tissue Characterization

Section: Biomedical Materials

Nam-Deuk Kim, Iowa State University
Viren Amin, Iowa State University
Doyle Wilson, Iowa State University
Gene Rouse, Iowa State University
Satish S. Udpa, Iowa State University

Brunswick, ME

12:00 AM

The Assessment of Surface Coatings Using Laser Ultrasound Detected with a Wideband Confocal Fabry-Pérot Interferometer Operating in Reflection Mode

Section: Coatings and Layers

A. S. Bradford, University of Manchester
Q. Shan, University of Manchester
R. J. Dewhurst, University of Manchester

Brunswick, ME

12:00 AM

The Boundary Element Method for Flaw Classification in Wave Guides

Section: UT Guided Waves

S. P. Pelts, Pennsylvania State University
J. P. Cysyk, Pennsylvania State University
J. L. Rose, Pennsylvania State University

Brunswick, ME

12:00 AM

The Effect of Ply Curvature on Acoustic Wave Propagation in Complex Composite Structures

Section: Composites

R. A. Kline, General Electric
R. S. Gilmore, General Electric

Brunswick, ME

12:00 AM

The Elastic Modulus of Nano-Sized Zinc Determined by Laser Ultrasonic Method

Section: Laser Based Ultrasonics

X. R. Zhang, Nanjing University
J. F. Xu, Nanjing University
Y. W. Du, Nanjing University

Brunswick, ME

12:00 AM

The Feasibility of Using the MFL Technique to Detect and Characterize Mechanical Damage in Pipelines

Section: Pipes and Tubing

Richard J. Davis, Battelle
J. Bruce Nestleroth, Battelle

Brunswick, ME

12:00 AM

The Interaction of Ultrasound with a Partially Contacting Solid-Solid Interface in the Low Frequency Regime

Section: Bonded Joints

Bruce Drinkwater, University of Bristol
Rob Dwyer-Joyce, University of Sheffield
Peter Cawley, Imperial College

Brunswick, ME

12:00 AM

The Lamb Wave Inspection of Chemical Plant Pipework

Section: Pipes and Tubing

David N. Alleyne, Imperial College
Peter Cawley, Imperial College
A. M. Lank, TWI
P. J. Mudge, TWI

Brunswick, ME

12:00 AM

The Laser Ultrasonic Inspection System (LUIS) at the Sacramento Air Logistics Center

Section: Laser Based Ultrasonics

C. J. Fiedler, USAF Wright Laboratory Materials Directorate
T. Ducharme, Sacramento Air Logistics Center
J. Kwan, Sacramento Air Logistics Center

Brunswick, ME

12:00 AM

The Ultrasonic Measurement of Elastic Constants of Structural FRP Composites

Section: Construction Materials (Concrete, Timber)

J. W. Littles Jr., Georgia Institute of Technology
L. J. Jacobs, Georgia Institute of Technology
A. H. Zureick, Georgia Institute of Technology

Brunswick, ME

12:00 AM

The Use of Barkhausen Noise for the Measurement of Residual Stresses in Aircraft Parts

Section: Residual Stress and Texture

J. O. Taylor, Rohr, Inc.

Brunswick, ME

12:00 AM

The Wavefield of an Ultrasonic Angle Beam Shear Wave Transducer: An Elastodynamic Approach

Section: UT Fields and Probes

Terence P. Lerch, Iowa State University
Lester W. Schmerr, Iowa State University
Alexander Sedov, Lakehead University

Brunswick, ME

12:00 AM

Theoretical and Experimental Study on Ultrasonic Transducers

Section: UT Fields and Probes

A. Ptchelintsev, Catholic University of Louvain
B. De Halleux, Catholic University of Louvain

Brunswick, ME

12:00 AM

Theoretical, Simulated, and Experimental Resolution Enhancement of a Transducer by Deconvolution of the Point Spread Function

Section: Signal Processing

J. Downs III, Colorado State University
M. L. Peterson, Colorado State University

Brunswick, ME

12:00 AM

Thermal Imaging for the Analysis of Energy Balance During Crack Propagation

Section: Thermal Waves

Yingxia Wang, Wayne State University
S. Telenkov, Wayne State University
L. D. Favro, Wayne State University
P. K. Kuo, Wayne State University
R. L. Thomas, Wayne State Unviersity

Brunswick, ME

12:00 AM

Thermoelastic/Ablatic Laser Generated Ultrasound in Graphite/Polymer Composites Detected with a Cfp-Based System in Reflection Configuration

Section: Laser Based Ultrasonics

James N. Caron, University of Delaware
Yuqiao Yang, Univeristy of Delaware
James B. Mehl, University of Delaware
Karl V. Steiner, University of Delaware

Brunswick, ME

12:00 AM

Thermographic Inspection with Ultrasonic Excitation

Section: Thermal Waves

A. Salerno, Universität Stuttgart
D. Wu, Universität Stuttgart
G. Busse, Universität Stuttgart
J. Rantala, Academy of Finland

Brunswick, ME

12:00 AM

Thick-Walled Aluminum Plate Inspection Using Remote Field Eddy Current Techniques

Section: Electromagnetic Probes

Y. S. Sun, Iowa State University
W. Lord, Iowa State University
L. Udpa, Iowa State University
S. Udpa, Iowa State University
S. K. Udpa, Iowa State University
K. H. Ng, Iowa State University
S. Nath, Amtak, Inc.

Brunswick, ME

12:00 AM

Through-Thickness Elastic Constant for Aramid-Epoxy/Aluminum Composite Materials

Section: Composites

Kyle W. Hollman, National Institute of Standards and Technology
C. M. Fortunko, National Institute of Standards and Technology
Dale W. Fitting, National Institute of Standards and Technology

Brunswick, ME

12:00 AM

Time-Gating of Pulsed Eddy Current Signals for Defect Characterization and Discrimination in Aircraft Lap-Joints

Section: New Techniques

Jay A. Bieber, Iowa State University
Sunil K. Shaligram, Iowa State University
James H. Rose, Iowa State University
John C. Moulder, Iowa State University

Brunswick, ME

12:00 AM

Tracking Accelerated Aging of Composites with Ultrasonic Attenuation Measurements

Section: New Techniques

D. J. Chinn, Lawrence Livermore National Laboratory
P. F. Durbin, Lawrence Livermore National Laboratory
G. H. Thomas, Lawrence Livermore National Laboratory
S. E. Groves, Lawrence Livermore National Laboratory

Brunswick, ME

12:00 AM

Transducer Design for High Sensitivity Ultrasonic Inspection of Titanium

Section: UT Fields and Probes

P. J. Howard, GE Aircraft Engines
D. C. Copley, GE Aircraft Engines
R. S. Gilmore, GE Corporate Research and Development Center

Brunswick, ME

12:00 AM

Ultrasonic Arrays for Flaw Characterization at High Temperature

Section: UT Fields and Probes

A. McNab, University of Stathclyde
G. Hayward, University of Stathclyde
A. Cochran, University of Stathclyde
I. D. Hall, University of Stathclyde
K. J. Kirk, University of Glasgow

Brunswick, ME

12:00 AM

Ultrasonic Characterization of Fatigue Behavior in Metal-Matrix Composites

Section: Composites

R. Nuñez, University of Houston
J. Wahnschaffe, University of Houston
K. Salama, University of Houston

Brunswick, ME

12:00 AM

Ultrasonic Characterization of Plasma Spray Coating

Section: Coatings and Layers

S. I. Rokhlin, Ohio State University
M. Ganor, Ohio State University
A. D. Degtyar, Ohio State University

Brunswick, ME

12:00 AM

Ultrasonic Characterization of Soft Body Impact Damage on CF/PEEK Laminates with Gelatin Projectiles

Section: New Techniques

H. Morita, Ishikawajima-Harima Heavy Industries Co., Ltd.
B. R. Tittmann, Pennsylvania State University

Brunswick, ME

12:00 AM

Ultrasonic Characterization of the Elastic Anisotropy in Aluminum-SiC and -Al2O3Metal Matrix Composites

Section: Composites

N. Mourik, University of Houston
Y. C. Chen, University of Houston
K. Salama, University of Houston

Brunswick, ME

12:00 AM

Ultrasonic Evaluation of Rough and Porous Ceramic Coatings with a Dual-Element Large Aperture Lensless Line-Focus Transducer

Section: UT Backscatter/Microstructure

D. Xiang, National Institute of Standards and Technology
N. N. Hsu, National Institute of Standards and Technology
G. V. Blessing, National Institute of Standards and Technology

Brunswick, ME

12:00 AM

Ultrasonic Field Reconstruction from Optical Interferometric Measurements

Section: Laser Based Ultrasonics

C. Mattei, Ohio State University
L. Adler, Ohio State University

Brunswick, ME

12:00 AM

Ultrasonic Gauging and Wavelet Image Processing for Wear and Erosion Mapping

Section: New Techniques

A. Abbate, Benete Laboratories
J. Frankel, Benet Laboratories
Robert W. Reed, East Stroudsbug University
P. Das, Rensselaer Polytechnic Institute

Brunswick, ME

12:00 AM

Ultrasonic Grain Noise Modeling: Recent Applications to Engine Titanium Inspections

Section: UT Backscatter/Microstructure

Frank J. Margetan, Iowa State University
Isaac Yalda, Iowa State University
R. Bruce Thompson, Iowa State University
J. Umbach, Pratt & Whitney
U. Suh, General Electric
P. J. Howard, General Electric
D. C. Copley, General Electric
R. Gilmore, General Electric

Brunswick, ME

12:00 AM

Ultrasonic Inspection of Wooden Pallet Parts Using Time of Flight

Section: Construction Materials (Concrete, Timber)

Daniel L. Schmoldt, Southern Research Station
Robert M. Nelson, Southern Research Station
Robert J. Ross, Southern Research Station
Kent A. McDonald, Southern Research Station

Brunswick, ME

12:00 AM

Ultrasonic Measurement of Thickness, Density and Elastic Moduli of a Layer Embedded into a Solid

Section: Materials Characterization

A. I. Lavrentyev, Ohio State University
S. I. Rokhlin, Ohio State University
B. Farahbakhsh, Edison Welding Institute

Brunswick, ME

12:00 AM

Ultrasonic Measurement System for the Assessment of Corrosion in Pipelines

Section: Ultrasonic

P. P. van't Veen, TNO Institute of Applied Physics

Brunswick, ME

12:00 AM

Ultrasonic Modeling Using Finite Domain Cubic Phase Integrals

Section: UT Fields and Probes

R. A. Roberts, Iowa State University

Brunswick, ME

12:00 AM

Ultrasonic Response in Nd-Fe-B Sintered Material During Elastic Deformation

Section: Residual Stress and Texture

H. Ogi, Osaka University
M. Hirao, Osaka University
A. Nozaki, Osaka University

Brunswick, ME

12:00 AM

Ultrasonic Spectroscopy for Corrosion Detection

Section: Materials Characterization

James R. Tucker, Southern Research Institute

Brunswick, ME

12:00 AM

Ultrasonic Wave Propagation in Anisotropic Fluid-Saturated Porous Media

Section: Elastic Waves

A. D. Degtyar, Ohio State University
S. I. Rokhlin, Ohio State University

Brunswick, ME

12:00 AM

Ultrasonics Guided Waves for Piping Inspection

Section: Pipes and Tubing

Joseph L. Rose, Pennsylvania State University
Dale Jiao, FBS, Inc.
Jack Spanner Jr., Electric Power Research Institute

Brunswick, ME

12:00 AM

UT Coverage of Nozzle Inner Radius including Amplitudes

Section: New Techniques

L. Carcione, Weidlinger Associates, Inc.
J. Isenberg, Weidlinger Associates, Inc.
A. Minachi, Iowa State University
D. MacDonald, Electric Power Research Institute

Brunswick, ME

12:00 AM

UWB Radar Holography Applied to RCS Signature Reduction of Military Vehicles

Section: Microwave NDE

H. D. Collins, Battelle Memorial Institute
D. M. Sheen, Battelle Memorial Institute
T. E. Hall, Battelle Memorial Institute
R. P. Gribble, Battelle Memorial Institute

Brunswick, ME

12:00 AM

Viscosity Measurement with Laser Ultrasonics

Section: Laser Based Ultrasonics

R. Daniel Costley, Mississippi State University
Christopher Winstead, Mississippi State University
Vimal Shah, Mississippi State University
Krishnan Balasubramaniam, Mississippi State University
J. P. Singh, Mississippi State University

Brunswick, ME

12:00 AM

Wave Propagation in a Newtonian Fluid with Viscosity Gradients Profiles

Section: Elastic Waves

Vimal V. Shah, Mississippi State University
Krishnan Balasubramaniam, Mississippi State Unviersity
R. Daniel Costley, Mississippi State Unviersity
Jagdish P. Singh, Mississippi State University

Brunswick, ME

12:00 AM

Wavelet Inverse Neutron Scattering Study of Layered Metallic NiC-Ti Composites

Section: Elastic Waves

G. Saab, Missouri University
B. DeFacio, Missouri University
H. Kaiser, Missouri University
D. L. Worcester, Missouri University

Brunswick, ME

12:00 AM

Weld Inspection by Radioscopy: Computer Simulation and Automatic Segmentation

Section: Image Analysis

C. Gueudré, CEA-Centre d’Etudes de Valduc
J. Moysan, Institut Universitaire de Technologie
G. Corneloup, Institut Universitaire de Technologie

Brunswick, ME

12:00 AM

X-Ray Backscatter Evaluation of Porosity Distribution in Low Density Porous Magnesium

Section: Materials Characterization

E. C. Greenawald, Geo-Centers, Inc.
L. J. Levenberry, Geo-Centers, Inc.
C. F. Poranski, United States Navy
R. K. Everett, United States Navy
K. E. Simmonds, United States Navy
N. K. Batra, United States Navy
D. Hu, United States Navy

Brunswick, ME

12:00 AM