Schedule

Subscribe to RSS Feed

1998
Thursday, January 1st
12:00 AM

A 2D Hybrid Model for Ultrasonic Pulse-Echo Scattering from a Rough Interface Buried in a Layered Medium

Section: Elastic Wave Scattering/Backscattering

Smaine Zeroug, Schlumberger-Doll Research
Yong-Hua Chen, Schlumberger-Doll Research

La Jolla, CA

12:00 AM

A Comparison of AE Measurements from Aluminum Alloys and Glass/Epoxy Composites with Different AE Techniques

Section: Acoustic Emission and Applications

S. H. Carpenter, University of Denver
M. R. Gorman, University of Denver

La Jolla, CA

12:00 AM

A Comparison of the Ability of Phase-Insensitive and Phase-Sensitive Ultrasonic Receivers to Detect Material Abnormalities Beneath Rough Surfaces

Section: System Reliability

K. W. Hollman, Washington University in St. Louis
R. L. Trousil, Washington University in St. Louis
M. R. Holland, Washington University in St. Louis
J. G. Miller, Washington University in St. Louis

La Jolla, CA

12:00 AM

A Formalism for Acoustical Traveltime Tomography in Heterogeneous Anisotropic Media

Section: Construction Materials

Lin-ping Song, Nanjing University
Shu-yi Song, Nanjing University
Shu-yi Zhang, Nanjing University
Hao-wu Liu, Sichuan Union University
Sha Chun, Chengdu Institute of Hydroelectric Research & Design
Zheng-zong Song, Chengdu Institute of Hydroelectric Research & Design

La Jolla, CA

12:00 AM

A Formalism for Predicting Ultrasonic Properties of Alloys in a Semi-Solid State

Section: Process Modeling/Control

A. F. Niessner III, Raytheon TI Systems
G. A. Gordon, Pennsylvania State University

La Jolla, CA

12:00 AM

A Homomorphic Deconvolution Technique for Improved Ultrasonic Imaging of Thin Composite Laminates

Section: Imaging and Reconstruction

Shi-Chang Wooh, Massachusetts Institute of Technology
Coach Wi, Massachusetts Institute of Technology

La Jolla, CA

12:00 AM

A Modified Differential Pickup Reflection Probe

Section: Electromagnetic Sensors

Sarit Sharm, Iowa State University
Lalita Udpa, Iowa State University
Yushi Sun, Iowa State University
Satish S. Udpa, Iowa State University

La Jolla, CA

12:00 AM

A Multi-Mode Solution for Analysis of the Reflection Coefficient of Open-Ended Rectangular Waveguides Radiating into a Dielectric Infinite Half-Space

Section: Microwaves

Karl Bois, Colorado State University
Aaron Benally, Colorado State University
Reza Zoughi, Colorado State University

La Jolla, CA

12:00 AM

A New Adaptive Grain Noise Cancellation Filterng Technique

Section: Signal Processing

S. Bae, Iowa State University
J. Kim, Iowa State University
Lalita Udpa, Iowa State University
Satish S. Udpa, Iowa State University

La Jolla, CA

12:00 AM

A New Automated System for Boreside Ultrasonic Inspection of Power Plant Turbine Rotors

Section: New Systems

M. Ley-Koo, Universidad Nacional Autónoma de Mexico
V. F. Godinez-Azcuaga, Instituto de Investigaciones Electricas
M. A. Marcial-Amaro, Universidad Autónoma del Estado de Morelos
A. Aguilar-Soto, Universidad Autónoma del Estado de Morelos
S. Salazar-Cruz, Universidad Autónoma del Estado de Morelos

La Jolla, CA

12:00 AM

A New Concept for a Laser-Based Ultrasonic Phased Array Receiver Using Photo-emf Detection

Section: Laser/Optical Ultrasonics

D. M. Pepper, Hughes Research Laboratories
T. R. O'Meara, Hughes Research Laboratories
G. J. Dunning, Hughes Research Laboratories

La Jolla, CA

12:00 AM

A Non-Contact Laser-Emat System for Crack and Hole Detection in Metal Plates

Section: New Systems

S. Dixon, University of Warwick
C. Edwards, University of Warwick
S. B. Palmer, University of Warwick

La Jolla, CA

12:00 AM

A Novel High Speed, High Resolution, Ultrasound Imaging System

Section: New Techniques

Marvin Lasser, Imperium, Inc.

La Jolla, CA

12:00 AM

A Novel Non-Contact Ultrasonic System for Liquid Level Measurement in Moving Metallic Containers

Section: New Systems

S. Dixon, University of Warwick
C. Edwards, University of Warwick
S. B. Palmer, University of Warwick

La Jolla, CA

12:00 AM

A SQUID NDE Measurement Model Using BEM

Section: Electromagnetic Sensors

A. P. Ewing, Vanderbilt University
T. A. Cruse, Vanderbilt University
J. P. Wikswo Jr., Vanderbilt University

La Jolla, CA

12:00 AM

A Study on Characteristics of Echoes from Planar Defects by the Ultrasonic Testing of Angle Beam Technique

Section: Process Modeling/Control

Hiromi Shirahata, Musashi Institute of Technology
Chitoshi Miki, Tokyo Institute of Technology

La Jolla, CA

12:00 AM

A Study on the Measurement of in-Plane Displacement at High Temperature by Electronic Speckle Pattern Interferometry Method

Section: New Techniques

Koung-Suk Kim, Chosun University
Hyoung-Tek Kim, Chosun University
Yong-Hoon Cha, Chosun University
Hyun-Chul Jung, Chosun University
Soon-Suk Jarng, Chosun University
Jae-Yeol Kim, Chosun University
Seong-Pil Yang, Dong-A College

La Jolla, CA

12:00 AM

A Two-Step Inverse Procedure for Outer Surface Defects Characterization from Ultrasonic BScan Images

Section: Imaging and Reconstruction

M. Faur, Commissariat à l’Energie Atomique
L. Paradis, Commissariat à l’Energie Atomique
Ph. Morisseau, Intercontrôle

La Jolla, CA

12:00 AM

Acoustic Emission Charaterization of Single and Dual Fiber Reinforced Metal Matrix Composites

Section: Acoustic Emission and Applications

Joon-Hyun Lee, Pusan National University
Won-Jin Sung, Pusan National University

La Jolla, CA

12:00 AM

Acoustic Inspection of Bond Strength Between Mortar and Reinforcement

Section: Construction Materials

Chih-Hung Chiang, Chaoyang Institute of Technology
Yu-Cheng Kan, Chaoyang Institute of Technology
Chin-Kwen Tang, Chaoyang Institute of Technology
Chin-Song Su, Chaoyang Institute of Technology

La Jolla, CA

12:00 AM

Acoustic Microscopy Inspection of Glass Repair Techniques

Section: Materials Properties

Jane Johnson, Fraunhofer Institute for Nondestructive Testing

La Jolla, CA

12:00 AM

Acoustic Response of a Layer of Spherical Inclusions with a Random or Periodic Arrangement

Section: Elastic Wave Scattering/Backscattering

V. K. Kinra, Texas A&M University
K. Maslov, Texas A&M University
B. K. Henderson, Texas A&M University
G. Diderich, Texas A&M University

La Jolla, CA

12:00 AM

Acoustic Tomographic Reconstruction of Fiber Angle in Orthotropic Composite Materials

Section: Composites

C. Sullivan, Amoco Exploration and Production Technology Group
R. A. Kline, University of Oklahoma
R. B. Mignogna, United States Navy

La Jolla, CA

12:00 AM

Acoustic, Electron and Optical Microscopy Visualization of Surface and Sub-Surface Cracks

Section: Fracture and Cracks

Z. M. Connor, Northwestern University
M. E. Fine, Northwestern University
Jan D. Achenbach, Northwestern University

La Jolla, CA

12:00 AM

Acousto-Ultrasonic Techniques for Evaluation of Bond Integrity of Composite Repair Patches

Section: Coatings, Films and Bond

I. M. Daniel, Northwestern University
J.-J. Luo, Northwestern University
H.-M. Hsiao, Northwestern University

La Jolla, CA

12:00 AM

Adaptive Heterodyne Interferometer for Ultrasonic NDE

Section: New Systems

B. F. Pouet, Northwestern University
R. K. Ing, University of Paris VII
S. Krishnaswamy, Northwestern University
D. Royer, University of Paris VII

La Jolla, CA

12:00 AM

Advanced Inspection of Thermal Protection Systems

Section: Composites

J. O. Taylor, Rohr, Inc.

La Jolla, CA

12:00 AM

Affordable NDE of Aerospace Composites with Laser Ultrasonics

Section: Laser/Optical Ultrasonics

Thomas E. Drake Jr., Lockheed Martin
Kenneth R. Yawn, Lockheed Martin
S. Y. Chuang, Lockheed Martin
Mark A. Osterkamp, Computer Sciences Corporation

La Jolla, CA

12:00 AM

An Acoustic Emission Evaluation of Environmentally Assisted Cracking of 7039-T6 Aluminum

Section: Acoustic Emission and Applications

Paul F. Buckley, Johns Hopkins University
Kevin Baldwin, Johns Hopkins University
Michael J. Ehrlich, Johns Hopkins University
James W. Wagner, Johns Hopkins University

La Jolla, CA

12:00 AM

An Adaptive Morphological Filter for Defect Detection in Eddy Current Aircraft Wheel Inspection

Section: New Systems

Shu Gao, Iowa State University
Lalita Udpa, Iowa State University

La Jolla, CA

12:00 AM

An Embedded Ultrasonic Wire Waveguide Sensor for In-Process Cure and In-Service Dynamic Response Monitoring of Liquid Molded Composite Parts

Section: Imaging and Reconstruction

Yan Liu, XXSYS Technologies, Inc.
Suresh M. Menon, XXSYS Technologies, Inc.
Gerald J. Posakony, XXSYS Technologies, Inc.

La Jolla, CA

12:00 AM

An Experimental Evaluation of the Resonant Ultrasonic Spectroscopy Method

Section: System Reliability

M. C. Remken, National Institute of Standards and Technology
C. M. Fortunko, National Institute of Standards and Technology
K. W. Hollman, National Institute of Standards and Technology
S. Kim, National Institute of Standards and Technology

La Jolla, CA

12:00 AM

An Experimental Study of Crack Detection in Annular Components by Ultrasonic Guided Waves

Section: Guided Waves and Applications

Zongbao Liu, Georgia Institute of Technology
Yves H. Berthelot, Georgia Institute of Technology

La Jolla, CA

12:00 AM

An Ultrasonic Method for Simultaneous Determination of Elastic Moduli, Density, Attenuation and Thickness of a Polymer Coating on a Foil

Section: Coatings, Films and Bond

Anton I. Lavrentyev, Ohio State University
Stanislav I. Rokhlin, Ohio State University

La Jolla, CA

12:00 AM

An Ultrasonic Technique to Detect Nonlinear Behavior Related to Degradation of Adhesive Bonds

Section: Coatings, Films and Bond

Zhenzeng Tang, Northwestern University
Ansheng Cheng, Northwestern University
Jan D. Achenbach, Northwestern University

La Jolla, CA

12:00 AM

Analysis of Acoustic Emission Output from Propagating Fatigue Crack

Section: Acoustic Emission and Applications

I. M. Daniel, Northwestern University
C. G. Sifniotopoulous, Northwestern University
J. J. Luo, Northwestern University

La Jolla, CA

12:00 AM

Analysis of Intensity Modulated Pulse Train Length for Laser Ultrasonic NDT

Section: Laser/Optical Ultrasonics

Terry Sanderson, Georgia Institute of Technology
Charles Ume, Georgia Institute of Technology
Jacek Jarzynski, Georgia Institute of Technology

La Jolla, CA

12:00 AM

Application of a Generalized Methodology for Quantitative Thermal Diffusivity Depth Profile Reconstruction in Manufactured Inhomogeneous Steel-Based Materials

Section: Thermal Wave Imaging

Mahendra Munidasa, University of Toronto
Frank Funak, University of Toronto
Andreas Mandelis, University of Toronto

La Jolla, CA

12:00 AM

Application of Finite Element Methods to Study Transient Wave Propagation in Elastic Wave Guides

Section: Guided Waves and Applications

Friedrich Moser, Georgia Institute of Technology
Laurence J. Jacobs, Georgia Institute of Technology
Jianmin Qu, Georgia Institute of Technology

La Jolla, CA

12:00 AM

Application of Mindlin Plate Theory to Analysis of Acoustic Emission Waveforms in Finite Plates

Section: Acoustic Emission and Applications

W. Huang, Digital Wave Corporation

La Jolla, CA

12:00 AM

Artmap Networks for Classification of Ultrasonic Weld Inspection Signals

Section: Signal Processing

P. Ramuhalli, Iowa State University
Lalita Udpa, Iowa State University
Satish S. Udpa, Iowa State University
J. Spanner, Electric Power Research Institute

La Jolla, CA

12:00 AM

Assessment of the Crack System Orientations of a Ceramic Matrix Composite Under Off-Axis Tensile Loading

Section: Fracture and Cracks

Stéphane Baste, Université Bordeaux 1
Christophe Aristégui, Université Bordeaux 1

La Jolla, CA

12:00 AM

Attenuation and Dispersion of Ultrasonic Waves in Rolled Aluminum

Section: Stress/Texture

S. Ahmed, Saint Louis University
R. Bruce Thompson, Iowa State University

La Jolla, CA

12:00 AM

Boundary Integral Equations for Modeling Arbitrary Flaw Geometries in Electric Current Injection NDE

Section: UT Sensors, Transducers and Fields

A. P. Ewing, Vanderbilt University
C. Hall Barbosa, Pontifical Catholic University of Rio de Janeiro
T. A. Cruse, Vanderbilt University
A. C. Bruno, Pontifical Catholic University of Rio de Janeiro
J. P. Wikswo Jr., Vanderbilt University

La Jolla, CA

12:00 AM

Brillouin Scattering as a Tool for Characterizing Surfaces, Interfaces and Thin Films

Section: Coatings, Films and Bond

W. Pang, University of the Witwatersrand
A. G. Every, University of the Witwatersrand
J. D. Comins, University of the Witwatersrand
P. R. Stoddart, University of the Witwatersrand
X. Zhang, University of the Witwatersrand
J. C. Cowhurst, University of the Witwatersrand
D. Pietersen, Atomic Energy Corporation of South Africa, Ltd.

La Jolla, CA

12:00 AM

Buried Thermoplastic Layer Diagnostics by the Use of Photo-Thermo-Acoustic Radiometry

Section: Coatings, Films and Bond

Mahendra Munidasa, University of Toronto
Andreas Mandelis, University of Toronto
Mel Ball, Alcan International, Ltd.

La Jolla, CA

12:00 AM

Calculation of Dispersion Curves in Bonded Joints Using Either Complex Frequency or Complex Slowness and Comparison of the Results with the Minima of the Plane Wave Reflection Coefficients

Section: Guided Waves and Applications

A. Bernard, Imperial College
M. Lowe, Imperial College
M. Deschamps, Université Bordeaux I

La Jolla, CA

12:00 AM

Calculation of Wideband Ultrasonic Fields Radiated by Water-Coupled Transducers into Anisotropic Media

Section: UT Sensors, Transducers and Fields

Nicolas Gengembre, Commissariat à l’ Énergie Atomique
Alain Lhémery, Commissariat à l’ Énergie Atomique
Pierre Calmon, Commissariat à l’ Énergie Atomique

La Jolla, CA

12:00 AM

Case-Based Reasoning for Automatic Interpretation of Data from Eddy-Current Inspection

Section: Signal Processing

J. Jarmulak, Nederlandse Organisatie voor Toegepast Natuurwetenschappelijk Onderzoek

La Jolla, CA

12:00 AM

CEA Program for Multiple-Technique Non Destructive Testing: The CIVASystem

Section: New Systems

Luc Paradis, Commissariat à l'énergie atomique
Michel Talvard, Commissariat à l'énergie atomique
Philippe Benoist, Commissariat à l'énergie atomique
Philippe Rizo, Commissariat à l'énergie atomique
Ghislain Pascal, Commissariat à l'énergie atomique
Guy Bayon, Commissariat à l'énergie atomique

La Jolla, CA

12:00 AM

Characteristics of the Reflection of Lamb Waves from Defects in Plates and Pipes

Section: Guided Waves and Applications

Michael Lowe, Imperial College

La Jolla, CA

12:00 AM

Characterization and Depth Profile of Lithium Depletion in Aluminum-Lithium Alloys by Ultrasound

Section: Materials Properties

Eric A. Lindgren, Industrial Quality, Inc.
L. Peter Martin, Johns Hopkins University
Moshe Rosen, Johns Hopkins University

La Jolla, CA

12:00 AM

Characterization of Acoustic Emission Waveforms from Fracture Events

Section: Acoustic Emission and Applications

Zhiqiang Shi, Georgia Institute of Technology
Maxim Koutsak, Georgia Institute of Technology
Scott Bair, Georgia Institute of Technology
Jacek Jarzynski, Georgia Institute of Technology
Laurence J. Jacobs, Georgia Institute of Technology

La Jolla, CA

12:00 AM

Characterization Of Epoxy-Coated Oxide Films Using Acoustic Microscopy

Section: Coatings, Films and Bond

B. D. Zeller, Imperial College
A. J. Kinloch, Imperial College
P. Cawley, Imperial College
P. Zinin, University of Oxford
O. Lefeuvre, University of Oxford
G. A. D. Briggs, University of Oxford
G. E. Thompson, University of Manchester
X. Zhou, University of Manchester

La Jolla, CA

12:00 AM

Characterization of Laser Ultrasonic Sources Using a Sagnac Interferometer

Section: Laser/Optical Ultrasonics

Pavel A. Fomitchov, Northwestern University
Alexei Kromine, Northwestern University
Sridhar Krishnaswamy, Northwestern University
Jan D. Achenbach, Northwestern University

La Jolla, CA

12:00 AM

Characterization of Mechanical Damage in Gas Transmission Pipelines

Section: Eddy Currents

V. Kamat, Iowa State University
C. Yeoh, Iowa State University
P. Ivanov, Iowa State University
D. Kim, Iowa State University
Y. Sun, Iowa State University
S. Mandayam, Iowa State University
Lalita Udpa, Iowa State University
Satish S. Udpa, Iowa State University
William Lord, Iowa State University

La Jolla, CA

12:00 AM

Characterization of Non-Symmetrical Damage in Smart Plate-Like Structures

Section: New Techniques

H. T. Banks, North Carolina State University
P. Emeric, North Carolina State University

La Jolla, CA

12:00 AM

Characterization of Piezoelectrics Using Line-Focus Transducer

Section: Guided Waves and Applications

Che-Hua Yang, Chang Gung University

La Jolla, CA

12:00 AM

Characterization of Rayleigh Wave Propagation in Concrete Using Laser Ultrasonics

Section: Construction Materials

Joseph O. Owino, Georgia Institute of Technology
Laurence J. Jacobs, Georgia Institute of Technology

La Jolla, CA

12:00 AM

Characterization of the Fatigue Behavior of Austenitic Steel Using HTSL-SQUID

Section: Fracture and Cracks

H.-J. Bassler, University of Kaiserslautern
D. Eifler, University of Kaiserslautern
M. Lang, Fraunhofer-Institute for Nondestructive Testing
G. Dobmann, Fraunhofer-Institute for Nondestructive Testing

La Jolla, CA

12:00 AM

Characterization of the Photo-emf Response for Laser-Based Ultrasonic Sensing Under Simulated Industrial Conditions

Section: Laser/Optical Ultrasonics

D. M. Pepper, Hughes Research Laboratories
G. J. Dunning, Hughes Research Laboratories
M. P. Chiao, Hughes Research Laboratories
T. R. O'Meara, Hughes Research Laboratories
P. V. Mitchell, Melles Griot
I. Lahiri, Purdue University
D. D. Nolte, Purdue University

La Jolla, CA

12:00 AM

Characterization of the Ply Boundaries in Carbone-Epoxy Composite Materials Using Longitudinal Ultrasonic Waves

Section: Composites

M. Ourak, Université de Valenciennes
M. Ouaftough, Université de Valenciennes
M. Duquennoy, Université de Valenciennes
W. J. Xu, Université de Valenciennes

La Jolla, CA

12:00 AM

Clear Eddy Current Flaw Image Using Computerized Tomography Inversion Technique

Section: Imaging and Reconstruction

Hiroshi Hoshikawa, Nihon University
Kiyoshi Koyama, Nihon University

La Jolla, CA

12:00 AM

CoBRA: Cone Beam Computed Tomography (CT) Reconstruction Code in Interactive Data Language (IDL)

Section: X-Rays and Computed Tomography

Matthew J. Sheats, Los Alamos National Laboratory
David M. Stupin, Los Alamos National Laboratory

La Jolla, CA

12:00 AM

Coherent Reflection and Transmission by a Randomly Cracked Elastic Slab

Section: Elastic Wave Scattering/Backscattering

Y. C. Angel, Rice University
A. Bolshakov, Rice University

La Jolla, CA

12:00 AM

Complex Contour Ultrasonic Scanning System Application and Training

Section: New Systems

Samuel J. Wormley, Iowa State University
H. Zhang, Iowa State University

La Jolla, CA

12:00 AM

Computer Modeling of Eddy Current Transmit-Receive Probes for Tube Inspection

Section: Eddy Currents

S. P. Sullivan, Atomic Energy of Canada Limited
V. S. Cecco, Atomic Energy of Canada Limited
L. S. Obrutsky, Atomic Energy of Canada Limited
D. Humphrey, Atomic Energy of Canada Limited
S. P. Smith, Atomic Energy of Canada Limited
K. A. Emde, Atomic Energy of Canada Limited

La Jolla, CA

12:00 AM

Coupling Microstructure Outputs of Process Models to Ultrasonic Inspectability Predictions

Section: Process Modeling/Control

R. Bruce Thompson, Iowa State University
Frank J. Margetan, Iowa State University
I. Yalda, Iowa State University
Chien-Ping Chiou, Iowa State University
P. Panetta, Iowa State University

La Jolla, CA

12:00 AM

D2D: A Robust Technique for Detection of Structural Heterogeneities in Solids, Based on Transient Thermography

Section: New Techniques

A. Braggiotti, Consiglio Nazionale delle Ricerche
A. Mazzoldi, Consiglio Nazionale delle Ricerche
S. Marinetti, Consiglio Nazionale delle Ricerche

La Jolla, CA

12:00 AM

Defect Detection in Copper Products with an Infrared Line Scanner

Section: Process Modeling/Control

Jussi Varis, University of Helsinki

La Jolla, CA

12:00 AM

Defect Visualization and Location of Reinforcing Bars and Cables in Concrete Using Active Electromagnetic Induction Imaging

Section: Construction Materials

J. L. Simmonds, University of Manchester
P. A. Gaydecki, University of Manchester

La Jolla, CA

12:00 AM

Detection of Deep Flaws in Aluminum Structure with Magneto-Resistive Sensors

Section: Electromagnetic Sensors

William F. Avrin, Quantum Magnetics
Raymond D. Rempt, Boeing

La Jolla, CA

12:00 AM

Detection of Fatigue Crack Propagation in Steel Using Magnetic Measurements

Section: Materials Properties

Y. Bi, Iowa State University
David C. Jiles, Iowa State University

La Jolla, CA

12:00 AM

Detection of Hardness Variations of Steel Through Stainless Steel

Section: Materials Properties

J. Timothy Lovett, Foster-Miller, Inc.
O. H. Zinke, International Validators, Inc.
W. F. Schmidt, University of Arkansas

La Jolla, CA

12:00 AM

Detection of Open Cracks by a Photothermal Camera

Section: New Systems

L. Legrandjacques, Framatome
J. C. Krapez, Office National d'Etudes et de Recherches Aérospatiales
F. Lepoutre, Office National d'Etudes et de Recherches Aérospatiales
D. L. Balageas, Office National d'Etudes et de Recherches Aérospatiales

La Jolla, CA

12:00 AM

Detection of Sublayer Fatigue Cracks under Airframe Rivets

Section: Eddy Currents

Buzz Wincheski, National Aeronautics and Space Administration
Min Namkung, National Aeronautics and Space Administration

La Jolla, CA

12:00 AM

Detection of Vertical Cracks in Carbon Fiber Composites Using an Infrared Line Scanner

Section: Composites

Jussi Varis, University of Helsinki

La Jolla, CA

12:00 AM

Development and Testing of the Time-Domain Microwave Nondestructive Evaluation System

Section: Microwaves

Fu-Chiarng Chen, University of Illinois at Urbana-Champaign
Weng Cho Chew, University of Illinois at Urbana-Champaign

La Jolla, CA

12:00 AM

Development of Geometrical Models of Hard-Alpha Inclusions for Ultrasonic Analysis in Titanium Alloys

Section: Imaging and Reconstruction

Brian Boyd, Iowa State University
Chien-Ping Chiou, Iowa State University
R. Bruce Thompson, Iowa State University
James H. Oliver, Iowa State University

La Jolla, CA

12:00 AM

Development of On-Line NDE for the Continuous Resin Transfer Molding (CRTM)™ Process

Section: Process Modeling/Control

R. W. Engelbart, Boeing
D. D. Palmer, Boeing

La Jolla, CA

12:00 AM

Digital Measuring Borescope System

Section: New Systems

Gene McGarry, Olympus America, Inc.

La Jolla, CA

12:00 AM

Digital Processing of Remotely Sensed Imagery

William B. Green, California Institute of Technology
Danika Jensen, California Institute of Technology
Amy Culver, California Institute of Technology

La Jolla, CA

12:00 AM

Dimensional Accuracy in X-Ray Computed Tomography Imaging

Section: X-Rays and Computed Tomography

S. Trent Neel, Advanced Research and Applications Corporation
Roosevelt Gibson, Advanced Research and Applications Corporation
Courtney R. Daniels, Advanced Research and Applications Corporation
Edward L. Klosterman, University of Dayton

La Jolla, CA

12:00 AM

Direct Numerical Approach for Analyzing Thermal Wave Interferometry Data

Section: Imaging and Reconstruction

M. Oksanen, Commission of the European Communities

La Jolla, CA

12:00 AM

Dynamic Stress Distribution in Unidirectionally Undulated Fibrous Composites

Section: Stress/Texture

Wael G. Abdelrahman, University of Cincinnati
Adrian H. Nayfeh, University of Cincinnati

La Jolla, CA

12:00 AM

Eddy Current Evaluation of Flaws in Coated Conductors

Section: Eddy Currents

A. Ptchelintsev, Catholic University of Louvain
B. de Halleux, Catholic University of Louvain
D. Degreve, Laborelec

La Jolla, CA

12:00 AM

Eddy Current Imaging Using Multi-Frequency Mixing Methods for Aircraft Structural Integrity Verification

Section: Eddy Currents

B. A. Lepine, Canada Department of National Defence

La Jolla, CA

12:00 AM

Eddy Current Scan Simulation with Coupled FEM/BEM

Section: Eddy Currents

E. A. Creek, Southwest Research Institute
R. Bruce E. Beissner, Southwest Research Institute

La Jolla, CA

12:00 AM

Effect of Rough Surfaces on Guided Waves in Plates

Section: Guided Waves and Applications

Dale E. Chimenti, Iowa State University
O. I. Lobkis, Iowa State University

La Jolla, CA

12:00 AM

Effects of a Flaw on Acoustic Wave Propagation by an EMAT System

Section: Guided Waves and Applications

T. Sugiura, Keio University
S. Maruyama, Keio University

La Jolla, CA

12:00 AM

Effects of Molecular Weight on Mechanical Properties of the Polyimide Larc-SI™

Section: Materials Properties

William T. Yost, National Aeronautics and Space Administration
John H. Cantrell, National Aeronautics and Space Administration
Thomas S. Gates, National Aeronautics and Space Administration
Karen S. Whitley, National Aeronautics and Space Administration

La Jolla, CA

12:00 AM

Effects of Residual Stress on Guided Waves in Layered Media

Section: Stress/Texture

Jianmin Qu, Georgia Institute of Technology
Guoli Liu, Georgia Institute of Technology

La Jolla, CA

12:00 AM

Efficient Eddy Current Models for Evaluation of Thin Conductive Coatings on Ferromagnetic Substrates

Section: Coatings, Films and Bond

B. de Halleux, Catholic University of Louvain
A. Ptchelintsev, Catholic University of Louvain

La Jolla, CA

12:00 AM

Efficient Reconstruction of Elastic Stiffnesses in Isotropic and Anisotropic Plates

Section: Composites

M. Rudolph, Iowa State University
O. I. Lobkis, Iowa State University
Dale E. Chimenti, Iowa State University

La Jolla, CA

12:00 AM

Elastic Wave Scattering from a Rough Strip-Like Crack

Section: Elastic Wave Scattering/Backscattering

P. Å. Jansson, Chalmers University of Technology

La Jolla, CA

12:00 AM

Elastic Wavefield Modeling for Arbitrarily Oriented Orthotropic Media

Section: Composites

Martin Spies, Fraunhofer-Institute for Nondestructive Testing
Michael Kröning, Fraunhofer-Institute for Nondestructive Testing

La Jolla, CA

12:00 AM

Electromagnetic Microscope for Low Frequency, Pulsed, Eddy Current Evaluation of Airframes

Section: Electromagnetic Sensors

Walter Podney, SQM Technology, Inc.

La Jolla, CA

12:00 AM

Electromechanical Modeling of Ultrasonic Transducers

Section: UT Sensors, Transducers and Fields

Lester W. Schmerr Jr., Iowa State University
Chanjiu Dang, Iowa State University
Alexander Sedov, Lakehead University

La Jolla, CA

12:00 AM

EMAT Generation and Laser Detection of Single Lamb Wave Modes

Section: Guided Waves and Applications

Zhiqi Guo, Northwestern University
Jan D. Achenbach, Northwestern University
Sridhar Krishnaswamy, Northwestern University

La Jolla, CA

12:00 AM

Enhanced Thermographic Detection of Delaminations with Computational Pulse Shaping

Section: Thermal Wave Imaging

Wililam P. Winfree, National Aeronautics and Space Administration

La Jolla, CA

12:00 AM

Evaluation of Bonded Boron/Epoxy Repairs on Aircraft Skin With Simulated Damage

Section: Coatings, Films and Bond

H. Aglan, Tuskegee University
Z. Zhang, Tuskegee University
T. Rowell, Tuskegee University
T. Ahmed, Wayne State University
R. Thomas, Wayne State University

La Jolla, CA

12:00 AM

Evaluation of Dispersion Modes for Layered Structures Using Focused Acoustic Waves

Section: UT Sensors, Transducers and Fields

X.-J. Xu, Université de Valenciennes
M. Ourak, Université de Valenciennes

La Jolla, CA

12:00 AM

Evaluation of the Interfacial Sliding Stress of Ceramic Matrix Composites Under Tensile Loading

Section: Composites

Jean-Marie Morvan, Université Bordeaux l
Stéphane Baste, Université Bordeaux l

La Jolla, CA

12:00 AM

Experimental Observation of the Slow Squirting Mode in Solid/Fluid/Solid Trilayers

Section: Guided Waves and Applications

Waled Hassan, University of Cincinnati
Peter B. Nagy, University of Cincinnati

La Jolla, CA

12:00 AM

Extension of Ahmed & Thompson Theory to General Elastic Plane Quasi-Wave Propagation in Textured Polycrystalline Material

Section: Stress/Texture

Cijayendra K. Munikoti, FORCE Institute
A. W. Eberhard Neumann, BAM

La Jolla, CA

12:00 AM

Fatigue Damage and Its Nondestructive Evaluation: An Overview

Otto Buck, Iowa State University

La Jolla, CA

12:00 AM

Field and Beta-Site Testing of the Dripless Bubbler Ultrasonic Scanner

Section: New Systems

Daniel J. Barnard, Iowa State University
David K. Hsu, Iowa State University

La Jolla, CA

12:00 AM

Finite Element Modeling of the Effect of Creep Damage on a Magnetic Detector Signal for Seam-Welded Steel Pipes

Section: Materials Properties

M. J. Sablik, Southwest Research Institute
David C. Jiles, Iowa State University
M. R. Govindaraju, Magnetica, Inc.

La Jolla, CA

12:00 AM

Finite Element Modeling of Ultrasonic Waves Produced by a Pulsed Laser

Section: Laser/Optical Ultrasonics

J. J. Dike, Sandia National Laboratories

La Jolla, CA

12:00 AM

Finite Element Simulation of Leaky Surface Wave Propagation Excited by a Line-Focused Transducer

Section: UT Sensors, Transducers and Fields

Koichiro Kawashima, Nagoya Institute of Technology
Toshihiro Ito, Nagoya Institute of Technology
Kiichiro Mori, Nagoya Institute of Technology

La Jolla, CA

12:00 AM

Finite Element Simulation of Pulsed Remote Field Eddy Current Phenomenon

Section: Eddy Currents

Yushi Sun, Iowa State University
Weng-Choon Loo, Iowa State University
Dennis C. Kunerth, Idaho National Engineering Laboratory
Terrence K. O'Brien, Idaho National Engineering Laboratory

La Jolla, CA

12:00 AM

Forward Modeling of Transducer Misalignment Effects in Ultrasonic Leaky Wave Measurements

Section: UT Sensors, Transducers and Fields

Smaine Zeroug, Schlumberger-Doll Research
Han Zhang, Iowa State University
Dale E. Chimenti, Iowa State University

La Jolla, CA

12:00 AM

Fresco Thermograph IC Inspection by Convective Heating Technique

Section: New Techniques

P. G. Bison, Consiglio Nazionale delle Ricerche
E. Grinzato, Consiglio Nazionale delle Ricerche
S. Marinetti, Consiglio Nazionale delle Ricerche
A. Braggiotti, Consiglio Nazionale delle Ricerche

La Jolla, CA

12:00 AM

Geometrical Acoustics in a Heterogeneous Anisotropic Elastic Solid: Application to a Wavy Composite

Section: Guided Waves and Applications

Kwang Yul Kim, Cornell University
Wei Zou, Cornell University
Wolfgang Sachse, Cornell University

La Jolla, CA

12:00 AM

Guided Transient Waves in a Circular Annulus

Section: Guided Waves and Applications

Guoli Liu, Georgia Institute of Technology
Jianmin Qu, Georgia Institute of Technology

La Jolla, CA

12:00 AM

Guided Ultrasonic Waves for the Inspection of Post-Tensioned Bridges

Section: Construction Materials

Brian Pavlakovic, Imperial College
Michael Lowe, Imperial College
Peter Cawley, Imperial College

La Jolla, CA

12:00 AM

High-Speed High-Resolution Subsurface Defect Detection in Ceramics Using Optical Gating Techniques

Section: New Techniques

M. Bashikansky, United States Navy
M. D. Duncan, United States Navy
J. Reintjes, United States Navy

La Jolla, CA

12:00 AM

High-Speed Monitoring of Surface Defects in Rail Tracks Using Ultrasonic Doppler Effect

Section: New Techniques

Shi-Chang Wooh, Massachusetts Institute of Technology
Arthur Clay, Massachusetts Institute of Technology

La Jolla, CA

12:00 AM

HTS SQUID System for Eddy Current Testing of Airplane Wheels and Rivets

Section: Electromagnetic Sensors

M. Grüneklee, Forschungszentrum Jülich GmbH
H.-J. Krause, Forschungszentrum Jülich GmbH
R. Hohmann, Forschungszentrum Jülich GmbH
M. Maus, Forschungszentrum Jülich GmbH
D. Lomparski, Forschungszentrum Jülich GmbH
M. Banzet, Forschungszentrum Jülich GmbH
J. Schubert, Forschungszentrum Jülich GmbH

La Jolla, CA

12:00 AM

Hydroproof Acoustic Emission for Prediction of Failure Behavior in Composite Pressure Vessels

Section: Acoustic Emission and Applications

Sung-Jin Song, Chosun University
Chi-Hwan Oh, Chosun University
Hak-Joon Kim, Chosun University
Ji-Ung Choe, Chosun University

La Jolla, CA

12:00 AM

Identification of Viscoelastic Moduli of Composite Materials from the Plate Transmission Coefficients

Section: Composites

Bernard Hosten, University of Bordeaux I
Michel Castaings, University of Bordeaux I
Tribikram Kundu, University of Arizona

La Jolla, CA

12:00 AM

Imaging Flaws in Adhesive Joints Using Acoustic Techniques and Infrared Thermography

Section: Coatings, Films and Bond

Deborah Hopkins, Lawrence Berkeley National Laboratory
Seiji Nakagawa, Lawrence Berkeley National Laboratory
Kurt Nihei, Lawrence Berkeley National Laboratory
Daniel Turler, Lawrence Berkeley National Laboratory

La Jolla, CA

12:00 AM

Improved Methodology for Inspection Reliability Assessment for Detecting Synthetic Hard Alpha Inclusions in Titanium

Section: System Reliability

William Q. Meeker Jr., Iowa State University
Shuen-Lin Jeng, Iowa State University
Chien-Ping Chiou, Iowa State University
R. Bruce Thompson, Iowa State University

La Jolla, CA

12:00 AM

In-Plane Elastic Property Characterization in Composite Plates

Section: Composites

O. I. Lobkis, Iowa State University
Dale E. Chimenti, Iowa State University
Han Zhang, Iowa State University
M. Rudoph, Iowa State University

La Jolla, CA

12:00 AM

In-Situ Observation of the Stress Field of the Failure Process in Single Fibre Reinforced Polymers

Section: Composites

S. Ritter, Institut für Kunststoffprüfung und Kunststoffkunde
G. Busse, Institut für Kunststoffprüfung und Kunststoffkunde

La Jolla, CA

12:00 AM

Infrared Imaging of a Stress-Crazed Polymer

Section: Thermal Wave Imaging

Yingxia Wang, Wayne State University
S. A. Telenkov, Wayne State University
Yuesheng Lu, Wayne State University
L. D. Favro, Wayne State University
P. K. Kuo, Wayne State University
R. L. Thomas, Wayne State University

La Jolla, CA

12:00 AM

Inspection of Flip-Chip Epoxy Underfill in Microelectronic Assemblies Using Compensated Laser-Based Ultrasonic Receivers

Section: New Systems

D. M. Pepper, Hughes Research Laboratories
G. J. Dunning, Hughes Research Laboratories
M. P. Chiao, Hughes Research Laboratories
T. R. O'Meara, Hughes Research Laboratories
P. V. Mitchell, Melles Griot

La Jolla, CA

12:00 AM

Integrated Quality Assurance Program for the Hydra-70 Solid Rocket Motor

Section: New Systems

E. Morris, United States Navy
L. M. Glowacki, United States Navy
Leonard J. Bond, University of Denver

La Jolla, CA

12:00 AM

Integrating a Stress Corrosion Crack Model into Finite Element Electromagnetic NDT Code

Section: Eddy Currents

Gregory Kobidze, Iowa State University
William Lord, Iowa State University
Satish S. Udpa, Iowa State University

La Jolla, CA

12:00 AM

Internet Offering to Foster NDE/NDT Technological Education in Community and Technical Colleges

Section: Training

Samuel J. Wormley, Iowa State University

La Jolla, CA

12:00 AM

Investigation of Sound Property of Laser-Shocked Aluminum Alloy

Section: Materials Properties

X. R. Zhang, Nanjing University
Y. K. Zhang, Nanjing University
S. Y. Zhang, Nanjing University

La Jolla, CA

12:00 AM

Investigation of Thermal Diffusivity for Nano-Phase Composite Ceramics

Section: Composites

F. Xiao, Nanjing University
X. R. Zhang, Nanjing University
D. Fei, Nanjing University
C. M. Gan, Nanjing University
G. H. Lei, Nanjing University
D. Zhang, Nanjing University
Y. P. Jin, Nanjing University
G. D. Zhang, Nanjing University

La Jolla, CA

12:00 AM

Investigation of Thin Layers Ceramic Structures Based on Doppler Scanning Acoustic Microscopy

Section: Coatings, Films and Bond

S. A. Titov, University of Windsor
R. G. Maev, University of Windsor
A. N. Bogachenkov, Russian Academy of Sciences

La Jolla, CA

12:00 AM

Lamb Wave Imaging and V(Z) Using a Broadband System

Section: Coatings, Films and Bond

Nader Saffari, University College London
Chuon-Szen Ong, University College London

La Jolla, CA

12:00 AM

Laser Ultrasonics NDE of Two-Layered Samples

Section: Laser/Optical Ultrasonics

R. Coulette, Office National d’Etudes et de Recherches Aérospatiales
E. Lafond, Office National d’Etudes et de Recherches Aérospatiales
F. Lepoutre, Office National d’Etudes et de Recherches Aérospatiales
D. Balageas, Office National d’Etudes et de Recherches Aérospatiales
M.-H. Nadal, Commissariat à l’Energie Atomique
C. Gondard, Commissariat à l’Energie Atomique

La Jolla, CA

12:00 AM

Laser Ultrasound Imaging of Lamb Waves in Thin Plates

Section: Laser/Optical Ultrasonics

Peter W. Lorraine, General Electric

La Jolla, CA

12:00 AM

Laser-Based Ultrasonic Inspection of Complexly Contoured Rocket Engine Components

Section: Laser/Optical Ultrasonics

A. D. W. McKie, Rockwell Science Center
R. C. Addison Jr., Rockwell Science Center

La Jolla, CA

12:00 AM

Laser-Ultrasonic Optical Characterization of Nonmetals

Section: Materials Properties

A. Hammoutene, École Polytechnique de Montréal
F. Enguehard, École Polytechnique de Montréal
L. Bertrand, École Polytechnique de Montréal

La Jolla, CA

12:00 AM

Limited Projection 3D X-Ray Tomography Using the Maximum Entropy Method

Section: X-Rays and Computed Tomography

Valery L. Vengrinovich, Belarussian Academy of Science
Yuri B. Dekevich, Belarussian Academy of Science
Gerd-Rudiger Tillack, Bundesanstalt für Materialforschung und -prüfung

La Jolla, CA

12:00 AM

Linear and Nonlinear Image Restoration Methods for Eddy Current Nondestructive Evaluation

Section: Signal Processing

Bing Wang, Iowa State University
John P. Basart, Iowa State University
John C. Moulder, Iowa State University

La Jolla, CA

12:00 AM

Load-Induced Change in the Elastic Symmetry of a Ceramic Matrix Composite Under Off-Axis Tensile Loading

Section: Composites

Christophe Aristégui, Université Bordeaux 1
Stéphane Baste, Université Bordeaux 1

La Jolla, CA

12:00 AM

Low Frequency, Pulsed Eddy Currents for Deep Penetration

Section: Eddy Currents

Wililam W. Ward III, Iowa State University
John C. Moulder, Iowa State University

La Jolla, CA

12:00 AM

Magnetostrictive Emat Efficiency as a Materials Characterization Tool

Section: Materials Properties

B. Igarishi, National Institute of Standards and Technology
G. A. Alers, National Institute of Standards and Technology
P. T. Purtscher, National Institute of Standards and Technology

La Jolla, CA

12:00 AM

Material Parameter Determination from Time-Domain Signals Transmitted and Reflected by a Layered Structure

Section: UT Sensors, Transducers and Fields

A. Cheng, Northwestern University

La Jolla, CA

12:00 AM

Mathematical Modeling of the Interaction of Non-Uniform Field ACFM with Finite Size Cracks

Section: Eddy Currents

R. Mostafavi, University of Essex
D. Mirshekar-Syahkal, University of Essex

La Jolla, CA

12:00 AM

Measurement of Acoustoelastic Effect of Rayleigh Surface Waves Using Laser Ultrasonics

Section: Stress/Texture

W.-Y. Lu, Sandia National Laboratories
L. W. Peng, Sandia National Laboratories
Stephen D. Holland, Cornell University

La Jolla, CA

12:00 AM

Measurement of Anisotropic Elastic Constants of an Aluminum Composite Plate Using a Double Reflection Method

Section: Composites

Koichiro Kawashima, Nagoya Institute of Technology
Yoshiyuki Shimizu, Nagoya Institute of Technology
Mamoru Imuta, Kawasaki Heavy Industries

La Jolla, CA

12:00 AM

Measurements of Surface-Breaking Flaws in Steel Pipes Using a SQUID Susceptometer in an Unshielded Environment

Section: Electromagnetic Sensors

C. Hall Barbosa, Pontifical Catholic University of Rio de Janeiro
A. C. Bruno, Pontifical Catholic University of Rio de Janeiro
G. S. Kühner, Pontifical Catholic University of Rio de Janeiro
J. P. Wikswo Jr., Vanderbilt University
A. P. Ewing, Vanderbilt University
Y. P. Ma, Vanderbilt University
C. S. Camerini, Petrobas

La Jolla, CA

12:00 AM

Microtopographic Inspection of Thermoplastic Rubber Shoe’s Sole: The Influence of Surface Roughness on Sole to Leather Gluing

Section: Coatings, Films and Bond

Manual F. M. Costa, Universidade do Minho
Virginia Pinho, Universidade do Minho

La Jolla, CA

12:00 AM

Microwave Scattering for the Characterization of a Disc-Shape Void in Dielectric Materials and Composites

Section: Laser/Optical Ultrasonics

John M. Liu, United States Navy

La Jolla, CA

12:00 AM

Model Based Predictive Control for the Tow-Placement Technique

Section: Process Modeling/Control

D. Heider, University of Delaware
J. W. Gillespie Jr., University of Delaware

La Jolla, CA

12:00 AM

Modeling Eddy Current Crack Signals of Differential and Reflection Probes

Section: Eddy Currents

Norio Nakagawa, Iowa State University
K. Dasoju, Iowa State University
T. A. Khan, Iowa State University
John C. Moulder, Iowa State University

La Jolla, CA

12:00 AM

Modeling of Microporosity Evolution During Solidification Processes

Section: Process Modeling/Control

J. Huang, Northwestern University
J. G. Conley, Northwestern University

La Jolla, CA

12:00 AM

Multi-Modality 3D Visualization of Hard-Alpha in Titanium Billets Utilizing CT X-Ray and Ultrasonic Imaging

Section: X-Rays and Computed Tomography

Mano Bashyam, General Electric
Ui Suh, General Electric

La Jolla, CA

12:00 AM

Multiple Scattering Calculations by Born Series Integral Equations

Section: Elastic Wave Scattering/Backscattering

M. Kitahara, Tohoku University
K. Nakagawa, UNITEC

La Jolla, CA

12:00 AM

NDE of Corrosion and Disbonding on Aircraft Using Thermal Wave Imaging

Section: Thermal Wave Imaging

Xiaoyan Han, Wayne State University
L. D. Favro, Wayne State University
Tasdiq Ahmed, Wayne State University
Zhong Ouyang, Wayne State University
Li Wang, Wayne State University
Xun Wang, Wayne State University
P. K. Kuo, Wayne State University
R. L. Thomas, Wayne State University

La Jolla, CA

12:00 AM

NDE: A Full Spectrum Technology

Tobey Cordell, United States Air Force

La Jolla, CA

12:00 AM

NDT of Specimen of Complex Geometry Using Ultrasonic Adaptive Techniques - The F.A.U.S.T. System

Section: New Techniques

O. Roy, Commissariat à l’Energie Atomique
S. Mahaut, Commissariat à l’Energie Atomique
M. Serre, Commissariat à l’Energie Atomique

La Jolla, CA

12:00 AM

New Capacitive-Array Sensors for Post-Process Cure Verification and NDE of Polymers and Composites

Section: Electromagnetic Sensors

E. S. Boltz, TPL, Inc.
T. C. Tiernan, TPL, Inc.
W. F. Hartman, TPL, Inc.

La Jolla, CA

12:00 AM

New Developments in Ultrasonic NDT Modeling in CIVA

Section: UT Sensors, Transducers and Fields

Alain Lhémery, Commissariat à l’Énergie Atomique
Pierre Calmon, Commissariat à l’Énergie Atomique
Raphaële Raillon, Commissariat à l’Énergie Atomique
Luc Paradis, Commissariat à l’Énergie Atomique

La Jolla, CA

12:00 AM

New Electromagnetic Sensors for Detection of Subsurface Cracking and Corrosion

Section: Electromagnetic Sensors

E. S. Boltz, TPL, Inc.
T. C. Tiernan, TPL, Inc.

La Jolla, CA

12:00 AM

Non-Invasive Measurement of Prepreg Resin Content Using Nuclear Magnetic Resonance

Section: New Techniques

Geoffrey A. Barrall, Quantum Magnetics, Inc.
Peter V. Czipott, Quantum Magnetics, Inc.
Erik E. Magnuson, Quantum Magnetics, Inc.
Charles R. Moeller, Quantum Magnetics, Inc.
Suresh M. Menon, XXSYS Technologies, Inc.

La Jolla, CA

12:00 AM

Nondestructive Holographic Interferometry Methods for the Dynamic Structural Analysis of a Graphite-Epoxy Polymer Composite Structure

Section: Composites

Howard Fein, Polaris Research Group

La Jolla, CA

12:00 AM

Nondestructive Testing System to Assess Lack-Of-Bond in Brazed Generator Coils by Ultrasonic Retro-Reflection

Section: Coatings, Films and Bond

W. Hassan, University of Cincinnati
P. B. Nagy, University of Cincinnati
J. F. Hopeck, University of Cincinnati

La Jolla, CA

12:00 AM

Nonlinear Ultrasonic Properties of As-Quenched Steels

Section: Materials Properties

D. C. Hurley, National Institute of Standards and Technology
P. T. Purtscher, National Institute of Standards and Technology
D. Balzar, National Institute of Standards and Technology
K. W. Hollman, National Institute of Standards and Technology
C. M. Fortunko, National Institute of Standards and Technology

La Jolla, CA

12:00 AM

North Central Collaboration for Education in NDE/NDT

Section: Training

Brian Larson, Iowa State University
David K. Holger, Iowa State University

La Jolla, CA

12:00 AM

Novel Measurement of Anisotropie Thermal Diffusivity

Section: Thermal Wave Imaging

Zhong Ouyang, Wayne State University
Feng Zhang, Wayne State University
Li Wang, Wayne State University
L D. Favro, Wayne State University
R. L. Thomas, Wayne State University

La Jolla, CA

12:00 AM

Numerical Methods for Computing Laser Generated Ultrasound Waves

Section: Laser/Optical Ultrasonics

Terry Sanderson, Georgia Institute of Technology
Charles Ume, Georgia Institute of Technology
Jacek Jarzynski, Georgia Institute of Technology
Michael Stallybrass, Georgia Institute of Technology

La Jolla, CA

12:00 AM

Numerical Simulation of Self-Focusing of an Array on an Interior Crack

Section: New Techniques

Ming Zhang, Northwestern University
Jan D. Achenbach, Northwestern University

La Jolla, CA

12:00 AM

Numerical Solution of a Direct 3D Electrostatic Resistivity Test of Green-State Metal Powder Compacts

Section: Materials Properties

S. Makarov, Worcester Polytechnic Institute
R. Ludwig, Worcester Polytechnic Institute
D. Apelian, Worcester Polytechnic Institute

La Jolla, CA

12:00 AM

Observation of Shear Wave Generation at Bonded Silicon-Carbide Interface

Section: Coatings, Films and Bond

David K. Rehbein, Iowa State University
Mufit Akinc, Iowa State University
J. Zheng, Iowa State University
Otto Buck, Iowa State University

La Jolla, CA

12:00 AM

Optimization of a Wide-Field Eddy Current Probe Using a Boundary Element Method Based Model

Section: Eddy Currents

Jay M. Amos, Pratt & Whitney
Joseph C. Chao, Pratt & Whitney

La Jolla, CA

12:00 AM

Optimization of Ultrasonic Phased Arrays

Section: UT Sensors, Transducers and Fields

Shi-Chang Wooh, Massachusetts Institute of Technology
Yijun Shi, Massachusetts Institute of Technology

La Jolla, CA

12:00 AM

Parallel Computation of Ultrasonic Wave Propagation in Orthotropic Composite Materials

Section: Composites

R. S. Schechter, United States Navy
N. K. Batra, United States Navy
R. B. Mignogna, United States Navy
K. E. Simmonds, United States Navy
P. P. Delsanto, Politecnico di Torino

La Jolla, CA

12:00 AM

Periodic Composite Backing Filter for the Design of Ultrasonic Transducers

Section: UT Sensors, Transducers and Fields

Sankar Chakraborty, University of Missouri–Columbia
Brian DeFacio, University of Missouri–Columbia

La Jolla, CA

12:00 AM

Photoinductive Imaging for Bolt Hole Corner Crack Inspection

Section: New Techniques

Cheng-Chi Tai, Iowa State University
John C. Moulder, Iowa State University

La Jolla, CA

12:00 AM

POD Assessment Using Real Aircraft Engine Components

Section: System Reliability

A. Fahr, National Research Council Canada
D. S. Forsyth, National Research Council Canada

La Jolla, CA

12:00 AM

Probability of Detection Modeling for Ultrasonic Testing

Section: System Reliability

Pradipta Sarkar, Iowa State University
William Q. Meeker, Iowa State University
R. Bruce Thompson, Iowa State University
Timothy A. Gray, Iowa State University
Warren Junker, Westinghouse

La Jolla, CA

12:00 AM

Progress in Detecting Transverse Matrix Cracking Using Modal Acoustic Emission

Section: Acoustic Emission and Applications

Michael R. Gorman, Digital Wave Corporation

La Jolla, CA

12:00 AM

Pulsed Eddy-Current Measurements for the Characterization of Thin Layers and Surface Treatments

Section: Eddy Currents

M. J. Johnson, Iowa State University
John R. Bowler, University of Surrey

La Jolla, CA

12:00 AM

Quantification of Damage Evolution in Multilayered High Temperature Composites from Ultrasonic Measurements

Section: Composites

A. D. Degtyar, Ohio State University
S. I. Rokhlin, Ohio State University

La Jolla, CA

12:00 AM

Quantitative Assessment of Corrosion in Aircraft Structures Using Scanning Pulsed Eddy Current

Section: Eddy Currents

Jay A. Bieber, Iowa State University
Cheng-Chi Tai, Iowa State University
John C. Moulder, Iowa State University

La Jolla, CA

12:00 AM

Quantitative X-Ray Inspection

Section: X-Rays and Computed Tomography

F. Retraint, Commissariat à l'énergie atomique
J. M. Dinten
R. Campagnolo
F. Peyrin, Institut national des sciences appliquées

La Jolla, CA

12:00 AM

Radiographic Least Squares Fitting Technique Accurately Measures Dimensions and X-Ray Attenuation

Section: X-Rays and Computed Tomography

Thomas A. Kelley, Los Alamos National Laboratory
David M. Stupin, Los Alamos National Laboratory

La Jolla, CA

12:00 AM

Rapid Calculation of Lamb Waves in Plates Due to Localized Sources

Section: Acoustic Emission and Applications

Dawei Guo, University of California, Los Angeles
Ajit Mal, University of California, Los Angeles

La Jolla, CA

12:00 AM

Rapid Characterization of the Degradation of Composites Using Plate Waves Dispersion Data

Section: Composites

Yoseph Bar-Cohen, California Institute of Technology
Shyh-Shiuh Lih, California Institute of Technology
Ajit Mal, University of California, Los Angeles
Zensheu Chang, University of California, Los Angeles

La Jolla, CA

12:00 AM

Recent Advances and Implementations of Flexible Eddy Current Probe Technology

Section: New Techniques

R. J. Filkins, General Electric
J. P. Fulton, General Electric
T. C. Patton, General Electric
J. D. Young, General Electric

La Jolla, CA

12:00 AM

Recent Development of MESSINE, a 3D Eddy Current Model

Section: Eddy Currents

R. La, Commissariat à l’Energie Atomique
B. de Barmon, Commissariat à l’Energie Atomique
B. Benoist, Commissariat à l’Energie Atomique
M. Talvard, Commissariat à l’Energie Atomique
R. Lengellé, University of Technology of Troyes
P. Gaillard, University of Technology of Troyes

La Jolla, CA

12:00 AM

Reconstruction of a Piston Transducer Beam Using Multi-Gaussian Beams (MGB) and Its Applications

Section: UT Sensors, Transducers and Fields

A. Minachi, Southwest Research Institute
Frank J. Margetan, Iowa State University
R. Bruce Thompson, Iowa State University

La Jolla, CA

12:00 AM

Refining Automated Ultrasonic Inspections with Simulation Models

Section: New Techniques

M. Garton, Iowa State University

La Jolla, CA

12:00 AM

Response Function of an Electromagnetic Microscope

Section: Electromagnetic Sensors

Walter Podney, SQM Technology, Inc.

La Jolla, CA

12:00 AM

Response of Laser-Induced Thermal Lens Effect at Solid Surface

Section: New Techniques

Jian-wen Fang, Nanjing University
Shu-yi Zhang, Nanjing University

La Jolla, CA

12:00 AM

Review of High Sensitivity AC Field Measurement — Recent Advances and Future Work

Section: Eddy Currents

D. Mirshekar-Syahkal, University of Essex

La Jolla, CA

12:00 AM

Rotating Excitation Probe for Inspecting PWR SG Tubes

Section: Eddy Currents

H. Schepens, Commissariat à l'énergie atomique
M. Pigeon, Commissariat à l'énergie atomique
B. Benoist, Commissariat à l'énergie atomique
J. Reuchet, Institut national des sciences appliquées
D. Boulanger, Institut national des sciences appliquées

La Jolla, CA

12:00 AM

SAFT Data Processing Applied to Laser-Ultrasonic Inspection

Section: Laser/Optical Ultrasonics

A. Blouin, National Research Council of Canada
D. Lévesque, National Research Council of Canada
C. Néron, National Research Council of Canada
F. Enguehard, National Research Council of Canada
D. Drolet, National Research Council of Canada
J.-P. Monchalin, National Research Council of Canada

La Jolla, CA

12:00 AM

Saw-Cut Scanning Patterns

Section: New Techniques

W. F. Schmidt, University of Arkansas
O. H. Zinke, International Validators, Inc.

La Jolla, CA

12:00 AM

Scaling Relation for the Inductance of a Coil on a Ferromagnetic Half-Space

Section: Eddy Currents

James H. Rose, Iowa State University
Cheng-Chi Tai, Iowa State University
John C. Moulder, Iowa State University

La Jolla, CA

12:00 AM

Self-Focusing of Rayleigh Waves: Simulation and Experiment

Section: New Techniques

W. A. K. Deutsch, Northwestern University
A. Cheng, Northwestern University
Jan D. Achenbach, Northwestern University

La Jolla, CA

12:00 AM

Sensor Development for High Temperature Viscosity Measurement

Section: UT Sensors, Transducers and Fields

Vimal Shah, Mississippi State University
Krishnan Balasubramaniam, Mississippi State University
R. Daniel Costley, Mississippi State University
Jagdish P. Singh, Mississippi State University

La Jolla, CA

12:00 AM

SH Wave Scattering by a Defect in a Plate

Section: Elastic Wave Scattering/Backscattering

Sohichi Hirose, Okayama University

La Jolla, CA

12:00 AM

Shape Estimation of Defects on Steam Generator Tubes

Section: Signal Processing

Kozo Shiraishi, Shikoku Research Institute, Inc.
Masanori Izumida, Ehime University
Kenji Murakami, Ehime University

La Jolla, CA

12:00 AM

Simple Thermal Wave Method for the Determination of Longitudinal Thermal Diffusivity of SiC-Based Fiber

Section: Composites

M. Oksanen, Commission of the European Communities
R. Scholz, Commission of the European Communities
L. Fabbri, Università di Roma

La Jolla, CA

12:00 AM

Simulation of Lamb Wave Propagation Using Pure Mode Excitation

Section: UT Sensors, Transducers and Fields

Brian Pavlakovic, Imperial College
David Alleyne, Imperial College
Michael Lowe, Imperial College
Peter Cawley, Imperial College

La Jolla, CA

12:00 AM

Simulation of Ultrasound Propagation across Interfaces with Imperfect Contact

Section: UT Sensors, Transducers and Fields

N. K. Batra, United States Navy
R. B. Mignogna, United States Navy
R. S. Schechter, United States Navy
P. P. Delanto, Politecnico di Torino
E. Ruffino, Politecnico di Torino
M. Scalerandi, Politecnico di Torino

La Jolla, CA

12:00 AM

Simultaneous Determination of Orientation and Thickness in Anisotropic Media

Section: New Techniques

Ronald A. Kline, San Diego State University
John B. Deaton, General Electric
D. R. Howard, General Electric

La Jolla, CA

12:00 AM

Sindbad: From CAD Model to Synthetic Radiographs

Section: X-Rays and Computed Tomography

A. Glière, Commissariat à l'énergie atomique

La Jolla, CA

12:00 AM

Spatial Resolution with Time-and-Polarization-Resolved Acoustic Microscopy

Section: New Techniques

D. Xiang, National Institute of Standards and Technology
N. N. Hsu, National Institute of Standards and Technology
S. E. Fick, National Institute of Standards and Technology
G. V. Blessing, National Institute of Standards and Technology

La Jolla, CA

12:00 AM

Spurious Modes in Finite Element Models for Ultrasonic Waves in Fluid-Solid Systems

Section: UT Sensors, Transducers and Fields

Paul Stucky, Iowa State University
William Lord, Iowa State University

La Jolla, CA

12:00 AM

SQUID Magnetometers for Depth-Selective, Oriented Eddy Current Imaging

Section: Electromagnetic Sensors

Yu Pei Ma, Vanderbilt University
John P. Wikswo Jr., Vanderbilt University

La Jolla, CA

12:00 AM

Status and Future Aspects of X-Ray Backscatter Imaging

Section: X-Rays and Computed Tomography

W. Niemann, Philips Industrial X-Ray GmbH
S. Zahorodny, Philips Industrial X-Ray GmbH

La Jolla, CA

12:00 AM

Stress State Evaluation of Laminated Aluminum Alloy Sheets by Surface Acoustic Waves

Section: Stress/Texture

M. Duquennoy, Université de Valenciennes et du Hainaut Cambrésis
M. Ouaftouh, Université de Valenciennes et du Hainaut Cambrésis
M. Ourak, Université de Valenciennes et du Hainaut Cambrésis
L. Camus, Université de Valenciennes et du Hainaut Cambrésis

La Jolla, CA

12:00 AM

Structure and Deformation of Aluminum Foams Through Computed Tomography

Section: Materials Properties

David J. Sypeck, University of Virginia
Haydn N. G. Wadley, University of Virginia
Hilary Bart-Smith, Harvard University
Stephan Koehler, Harvard University
Anthony G. Evans, Harvard University

La Jolla, CA

12:00 AM

Technology Transfer Using XRSIM as a Training Tool

Section: Training

Bruce Crouse, Cowley County Community College
Joe Gray, Iowa State University
Brian Larson, Iowa State University

La Jolla, CA

12:00 AM

The Application of Angular Profile of Ultrasonic Backscattering on the Layered Substrate

Section: Elastic Wave Scattering/Backscattering

Sung D. Kwon, Andong National University
Dong J. Yoon, Korea Research Institute of Standards and Science
Bong Y. Ahn, Korea Research Institute of Standards and Science

La Jolla, CA

12:00 AM

The Application of Wavelets and Fuzzy Logic to Eddy Current Flaw Detection in Steam Generator Tubes

Section: Signal Processing

Sheng-Fa Chuang, Iowa State University
John P. Basart, Iowa State University
John C. Moulder, Iowa State University

La Jolla, CA

12:00 AM

The Applicaton of a Dynamic Threshold to C-Scan Images with Variable Noise

Section: System Reliability

P. J. Howard, General Electric
D. C. Copley, General Electric
R. S. Gilmore, General Electric

La Jolla, CA

12:00 AM

The Detection of Magnetic Phase Transitions in ER-TM by Electromagnetic Acoustic Transducers

Section: Materials Properties

C. M. Lin, University of Warwick
S. Dixon, University of Warwick
C. Edwards, University of Warwick
S. B. Palmer, University of Warwick

La Jolla, CA

12:00 AM

The Effect of Rise Times on the Response of Fiber Composite Laminates to Dislocation Sources

Section: Acoustic Emission and Applications

E. Rhian Green, Leicester University

La Jolla, CA

12:00 AM

The Role of Propagation Characteristics in Acoustic Emission Pipeline Leak Location

Section: Acoustic Emission and Applications

Lance E. Rewerts, Iowa State University
Ronald A. Roberts, Iowa State University
M. Amanda Clark, Iowa State University

La Jolla, CA

12:00 AM

The Ultrasonic Detection of Environmental Degradation in Adhesive Joints

Section: Coatings, Films and Bond

K. Vine, Imperial College
P. Cawley, Imperial College
A. J. Kinloch, Imperial College

La Jolla, CA

12:00 AM

The Use of Huygens’ Principle to Model the Acoustic Field from Interdigital Lamb Wave Transducers

Section: UT Sensors, Transducers and Fields

P. Wilcox, Imperial College
R. Monkhouse, Imperial College
M. Lowe, Imperial College
P. Cawley, Imperial College

La Jolla, CA

12:00 AM

The Use of Ultrasonic Flaw and Noise Models in Designing Titanium Test Blocks

Section: System Reliability

Chien-Ping Chiou, Iowa State University
Isaac Yalda, Iowa State University
Frank J. Margetan, Iowa State University
R. Bruce Thompson, Iowa State University
Derek J. Sturges, General Electric

La Jolla, CA

12:00 AM

Theoretical Aspects of Transient Electromagnetic Field in Finite Sized Conducting Media

Section: Eddy Currents

M. Namkung, National Aeronautics and Space Administration
B. Wincheski, National Aeronautics and Space Administration
J. P. Fulton, General Electric
S. Nath, AMTAK, Inc.

La Jolla, CA

12:00 AM

Theoretical Evaluation of Ultrasonic Scattering by Flaws in Anisotropic Media

Section: Elastic Wave Scattering/Backscattering

Martin Spies, Fraunhofer-Institute for Nondestructive Testing
Michael Kröning, Fraunhofer-Institute for Nondestructive Testing

La Jolla, CA

12:00 AM

Theoretical Study for Detection of Defects in Weakly Absorbing Samples by Crossed-Beam Photothermal Technique

Section: Thermal Wave Imaging

Bin-cheng Liu, Nanjing University
Shu-yi Zhang, Nanjing University

La Jolla, CA

12:00 AM

Thermo-Electric Detection of Early Fatigue Damage in Metals

Section: Fracture and Cracks

Peter B. Nagy, University of Cincinnati
Jiangtao Hu, University of Cincinnati

La Jolla, CA

12:00 AM

Thermoelastic and Ablative Generation of Ultrasound: Source Effects

Section: Laser/Optical Ultrasonics

Todd W. Murray, Johns Hopkins University
James W. Wagner, Johns Hopkins University

La Jolla, CA

12:00 AM

Thermographic Characterization of Corrosion Using a Scanned Thermal Line Source

Section: Thermal Wave Imaging

K. Elliot Cramer, National Aeronautics and Space Administration
William P. Winfree, National Aeronautics and Space Administration

La Jolla, CA

12:00 AM

Thermographie Imaging of Defects in Anisotropie Composites

Section: Thermal Wave Imaging

Y. A. Plotnikov, National Aeronautics and Space Administration
William P. Winfree, National Aeronautics and Space Administration

La Jolla, CA

12:00 AM

Thickness Evaluation for Steel Sheets Using Saturation Magnetization

Section: Materials Properties

G. H. Shirkoohi, South Bank University
J. Z. Cao, South Bank University

La Jolla, CA

12:00 AM

Thickness Measurements of Curved Multi-Layered Polymer System Using Ultrasonic Pulse-Echo Method

Section: New Techniques

R. Gr. Maev, University of Windsor
H. Shao, University of Windsor
E. Yu. Maeva, University of Windsor

La Jolla, CA

12:00 AM

Three Ultrasonic Devices for the Elastic Moduli Determination at High Temperatures

Section: UT Sensors, Transducers and Fields

C. Gondard, Commissariat à l'énergie atomique
M.-H. Nadal, Commissariat à l'énergie atomique
C. Hermerel, Commissariat à l'énergie atomique

La Jolla, CA

12:00 AM

Time Scaling and Frequency Invariant Multiresolution Analysis of Ultrasonic NDE Signals

Section: Signal Processing

R. Polikar, Iowa State University
Lalita Udpa, Iowa State University
Satish S. Udpa, Iowa State University
J. Spanner, Electric Power Research Institute

La Jolla, CA

12:00 AM

Time-Resolved Line Focus Acoustic Microscopy Using Lamb Waves for Material Characterization of Thin Plates

Section: New Techniques

Johannes Vollmann, Northwestern University
Ansheng Cheng, Northwestern University
Jan D. Achenbach, Northwestern University

La Jolla, CA

12:00 AM

Torsional Waveguide Sensor for Molten Materials

Section: UT Sensors, Transducers and Fields

R. Daniel Costley, Mississippi State University
Krishnan Balasubramaniam, Mississippi State University
W. M. Ingham, Mississippi State University
Jason A. Simpson, Mississippi State University
Vimal Shah, Mississippi State University

La Jolla, CA

12:00 AM

Towards a Flat-Bottom Hole Standard for Thermal Imaging

Section: Thermal Wave Imaging

H. I. Ringermacher, General Electric
D. J. Mayton, General Electric
D. R. Howard, General Electric
B. N. Cassenti, Pratt & Whitney

La Jolla, CA

12:00 AM

Transient Eddy-Current NDE for Hidden Corrosion in Multilayer Structures

Section: Eddy Currents

S. K. Burke, Australia Department of Defence
G. R. Hugo, Australia Department of Defence
D. J. Harrison, United Kingdom Ministry of Defence

La Jolla, CA

12:00 AM

Two Dimensional Dislocation Sources in Fiber Composite Laminates

Section: Acoustic Emission and Applications

E. Rhian Green, Leicester University

La Jolla, CA

12:00 AM

Ultrasonic Analysis of Damage Development in Polymer Composites by Signal Processing Techniques

Section: Microwaves

J. Stanullo, Universität Stuttgart
G. Busse, Universität Stuttgart
S. Bojinski, Universität Karlsruhe
N. Gold, Universität Karlsruhe
S. Shapiro, Universität Karlsruhe

La Jolla, CA

12:00 AM

Ultrasonic Backscatter Rotation Scanner for Detection of Ply Bends and Fiber Wrinkles

Section: Composites

L. H. Pearson, Thiokol Corporation
L. G. Porter, Thiokol Corporation
G. A. Yurich, Thiokol Corporation

La Jolla, CA

12:00 AM

Ultrasonic C-Scan Standardization for Polymer-Matrix Composites - Acoustic Considerations

Section: System Reliability

R. A. Smith, United Kingdom Ministry of Defence
D. A. Bruce, United Kingdom Ministry of Defence
L. D. Jones, United Kingdom Ministry of Defence
A. B. Marriott, United Kingdom Ministry of Defence
L. P. Scudder, United Kingdom Ministry of Defence
S. J. Willsher, United Kingdom Ministry of Defence

La Jolla, CA

12:00 AM

Ultrasonic Characterization of Fatigue Damage in Metal Matrix Composites

Section: Fracture and Cracks

S. I. Rokhlin, Ohio State University
M. Ganor, Ohio State University
A. D. Degtyar, Ohio State University

La Jolla, CA

12:00 AM

Ultrasonic Characterization of Nickel-Chromium-Base Anticorrosive Coatings

Section: Coatings, Films and Bond

Valery F. Godínez-Azcuaga, Instituto de Investigaciones Eléctricas
Migues A. Marcial-Amaro, Instituto de Investigaciones Eléctricas
Jesús Porcayo-Calderón, Universidad Autónoma del Estado de Morelos
Obdulia Mayorga-Martin, Universidad Autónoma del Estado de Morelos

La Jolla, CA

12:00 AM

Ultrasonic Characterization of Thin Plate Bonding

Section: Coatings, Films and Bond

Q. Xie, Ohio State University
A. I. Lavrentyev, Ohio State University
S. I. Rokhlin, Ohio State University

La Jolla, CA

12:00 AM

Ultrasonic Evaluation of Transient Liquid Phase Bonding in Single Crystal Superalloy Castings

Section: Coatings, Films and Bond

David K. Hsu, Iowa State University
John J. Peters, Iowa State University
Rahul Singh, Iowa State University
Paula D. Freyer, Westinghouse
Robert E. Shannon, Westinghouse
Paul Zombo, Westinghouse

La Jolla, CA

12:00 AM

Ultrasonic Imaging of Cracks Under Installed Fasteners

Section: Fracture and Cracks

K. I. McRae, Canada Department of National Defence
R. W. Nolan, Canada Department of National Defence

La Jolla, CA

12:00 AM

Ultrasonic Imaging of Spall Damage Under Repeated Plate Impact Tests with C-Scan Acoustic Microscope

Section: Materials Properties

Koichiro Kawashima, Nagoya Institute of Technology
Naoya Nishiura, Nagoya Institute of Technology
Makota Takano, Nagoya Institute of Technology
Osamu Nakayama, Nagoya Institute of Technology

La Jolla, CA

12:00 AM

Ultrasonic Inspectability Models for Jet Engine Forgings

Section: System Reliability

Timothy A. Gray, Iowa State University

La Jolla, CA

12:00 AM

Ultrasonic Measurement of Clearances of a Rolling-Piston Type Rotary Compressor

Section: Process Modeling/Control

Nohyu Kim, LG Electronics, Inc.
Jinsoo Kim, LG Electronics, Inc.

La Jolla, CA

12:00 AM

Ultrasonic Monitoring of Recrystallization Textures in Aluminum

Section: Process Modeling/Control

G. Liu, Iowa State University
F. Laabs, Iowa State University
David K. Rehbein, Iowa State University
Otto Buck, Iowa State University
R. Bruce Thompson, Iowa State University

La Jolla, CA

12:00 AM

Ultrasonic NDE of Composite Panels with Gas-Coupled Laser Acoustic Detection

Section: Laser/Optical Ultrasonics

James N. Caron, University of Delaware
James B. Mehl, University of Delaware
Karl V. Steiner, University of Delaware

La Jolla, CA

12:00 AM

Ultrasonic Signal Attenuation in Engine Titanium Alloys

Section: Materials Properties

Frank J. Margetan, Iowa State University
P. D. Panetta, Iowa State University
R. Bruce Thompson, Iowa State University

La Jolla, CA

12:00 AM

Ultrasonic Signal Processing Applied to Flaw Characterization in Composite Materials

Section: Signal Processing

S. Alatissière, Dassault Aviation
A. Liot, Dessault Aviation
F. Thevenot, Dassault Aviation
M. Dessendre, Dassault Aviation
H. Trétout, Dassault Aviation

La Jolla, CA

12:00 AM

Ultrasonic Spectroscopy of two Parallel Imperfect Interfaces

Section: Coatings, Films and Bond

A. I. Lavrentyev, Ohio State University
A. Baltazar, Ohio State University
S. I. Rokhlin, Ohio State University

La Jolla, CA

12:00 AM

Ultrasonic Studies of Composites Undergoing Thermal and Fatigue Loading

Section: Composites

Eric I. Madaras, National Aeronautics and Space Administration
William P. Winfree, National Aeronautics and Space Administration
Patrick H. Johnson, National Aeronautics and Space Administration

La Jolla, CA

12:00 AM

Ultrasonic Transducer Radiation through a Curved Fluid-Solid Interface

Section: UT Sensors, Transducers and Fields

Terence P. Lerch, Iowa State University
Lester W. Schmerr Jr., Iowa State University
Alexander Sedov, Lakehead University

La Jolla, CA

12:00 AM

Ultrasonic Wave Dispersion and Attenuation in Fluid Filled Porous Media

Section: Construction Materials

H. Tavossi, Pennsylvania State University
B. R. Tittmann, Pennsylvania State University
F. Cohen-Tenoudji, University of Paris VII

La Jolla, CA

12:00 AM

Ultrasonic Wave Propagation in a Tooth Phantom

Section: New Techniques

S. R. Ghorayeb, Hofstra University
T. Xue, California Institute of Technology
William Lord, Iowa State University

La Jolla, CA

12:00 AM

Ultrasound Contrast Agents: The Advantage of Albumin Microsphere Technology

E. G. Jablonski, Moleecular Biosystems, Inc.
H. C. Dittrich, Moleecular Biosystems, Inc.
J. M. Bartlett, Moleecular Biosystems, Inc.
S. B. Podell, Moleecular Biosystems, Inc.

La Jolla, CA

12:00 AM

Ultrasound Generation in Composites via Embedded Optical Fibers

Section: Laser/Optical Ultrasonics

Daniel L. Balageas, Office National d’Etudes et de Recherches Aérospatiales
Nicolas Jaroslavsky, Office National d’Etudes et de Recherches Aérospatiales
Marc Dupong, Office National d’Etudes et de Recherches Aérospatiales
François Lepoutre, Office National d’Etudes et de Recherches Aérospatiales
Jean-Charles Gonthier, Ecole Polytechnique de Montreal
Lionel Bertrand, Ecole Polytechnique de Montreal

La Jolla, CA

12:00 AM

Uniform Eddy Current Probe with Little Disrupting Noise

Section: Electromagnetic Sensors

Hiroshi Hoshikawa, Nihon University
Kiyoshi Koyama, Nihon University

La Jolla, CA

12:00 AM

Uniform Evaluation of the Four Dimensional Transducer Transmission Phase Integral

Section: UT Sensors, Transducers and Fields

Ronald A. Roberts, Iowa State University

La Jolla, CA

12:00 AM

Use of a Priori Information for the Deconvolution of Ultrasonic Signals

Section: Signal Processing

J. Sallard, Commissariat à l’Energie atomique
L. Paradis, Commissariat à l’Energie atomique

La Jolla, CA

12:00 AM

Use of Electron Backscatter Diffraction in Understanding Texture and the Mechanisms of Backscattered Noise Generation in Titanium Alloys

Section: Elastic Wave Scattering/Backscattering

P. D. Panetta, Iowa State University
R. Bruce Thompson, Iowa State University
Frank J. Margetan, Iowa State University

La Jolla, CA

12:00 AM

Use of Rician Distributions to Predict the Distributions of Ultrasonic Flaw Signals in the Presence of Backscattered Noise

Section: Elastic Wave Scattering/Backscattering

Isaac Yalda, Iowa State University
Frank J. Margetan, Iowa State University
R. Bruce Thompson, Iowa State University

La Jolla, CA

12:00 AM

Using CAD Models in Transient Field Calculations through Arbitrarily Curved Surfaces

Section: UT Sensors, Transducers and Fields

A. Schumm, Electricité de France

La Jolla, CA

12:00 AM

Using Complementary Types of Data for 3D Flaw Imaging

Section: Imaging and Reconstruction

S. Gautier, Électricité de France
B. Lavayssière, Électricité de France
E. Fleuet, Électricité de France
J. Idier, Laboratoire des Signaux et Systèmes

La Jolla, CA

12:00 AM

Versatile Robotic Instruments for NDT/NDE Data Acquisition

Section: New Systems

B. Bridge, South Bank University
T. Sattar, South Bank University
A. Khalid, South Bank University
S. Chen, South Bank University
M. Rakocevic, South Bank University
X. Wang, South Bank University

La Jolla, CA

12:00 AM

Wave Propagation in a Plate with Defects

Section: Guided Waves and Applications

Zensheu Chang, University of California, Los Angeles
Ajit Mal, University of California, Los Angeles

La Jolla, CA

12:00 AM

Waveform-Based Analysis of Acoustic Emission from Fiber Fracture in Model Composite Plates

Section: Acoustic Emission and Applications

T. Bidlingmaier, Universität Stuttgart
A. Wanner, Universität Stuttgart
S. Ritter, Universität Stuttgart

La Jolla, CA

12:00 AM

Wide-Area Imaging of Ultrasonic Fields by Digital Phase-Stepping Shearography

Section: New Techniques

G. A. Gordon, Pennsylvania State University
B. A. Baird `, Pennsylvania State University
S. Wu, Pennsylvania State University

La Jolla, CA

12:00 AM