Schedule

Subscribe to RSS Feed

1999
Friday, January 1st
12:00 AM

A Noncontacting Method for Measuring Paper Sheet Grammage and Thickness Using Acoustic Tone Bursts

Section: Process Control

R. Vuohelainen, University of Helsinki
M. Luukkala, University of Helsinki

Snowbird, UT, USA

12:00 AM

A Study on the Nondestructive Evaluation of Carbon/Carbon Brake Disks Using Ultrasonics

Section: Process Control

Kwang-Hee Im, Iowa State University
David K. Hsu, Iowa State University
Hyunjo Jeong, Pusan National University

Snowbird, UT, USA

12:00 AM

An Acoustic Technique for the Noninvasive in-Situ Measurement of Crystal Size and Solution Concentration

Section: Process Control

D. J. Chinn, Lawrence Livermore National Laboratory
P. R. Souza, Lawrence Livermore National Laboratory
H. F. Robey, Lawrence Livermore National Laboratory

Snowbird, UT, USA

12:00 AM

Application of Java Applets to Basic Ultrasonics Education Via the Internet

Section: Education and Training

Samuel J. Wormley, Iowa State University

Snowbird, UT, USA

12:00 AM

Calibration Techniques for Electronic-Based Systems Used in Measurement of Nonlinearity Parameters

Section: NDE Reliability Calibration

William T. Yost, National Aeronautics and Space Administration
John H. Cantrell, National Aeronautics and Space Administration

Snowbird, UT, USA

12:00 AM

Characterizing the Curing of Adhesive Joints by a Nonlinear Ultrasonic Technique

Section: Process Control

Guoli Liu, Georgia Institute of Technology
Jianmin Qu, Georgia Institute of Technology
Laurence J. Jacobs, Georgia Institute of Technology
Jiayi Li, Changchun Institute of Art and Sciences

Snowbird, UT, USA

12:00 AM

Correlation Between NDE Measurements and Physical Properties of Copper Powder Metallurgy Components

Section: Process Control

D. Utrata, Iowa State University
J. Oswood, Square D Company

Snowbird, UT, USA

12:00 AM

Defect Detection in Wire Manufacturing

Section: Process Control

H. Weinstock, University of Houston
N. Tralshawala, University of Houston
J. R. Claycomb, University of Houston
T. J. Shaw, University of California Arlington

Snowbird, UT, USA

12:00 AM

Development of a Single-Side NMR Magnet for NDE Applications

Section: Process Control

R. W. Engelbart, Boeing Company
M. S. Conradi, Washington University
C. F. Mendelsohn, Washington University

Snowbird, UT, USA

12:00 AM

Development of Computer Based Educational Materials Through the North Central Collaboration for Education in NDE

Section: Education and Training

Brian Larson, Iowa State University

Snowbird, UT, USA

12:00 AM

Effects of Stress on the Probability of Detection for Magnetic Flux Leakage Inspection

Section: NDE Reliability Calibration

P. Ivanov, Iowa State University
Lalita Udpa, Iowa State University

Snowbird, UT, USA

12:00 AM

Epoxy Cure Observed by Ultrasound, NMR and WAXS

Section: Process Control

R. E. Challis, Keele University
R. J. Freemantle, Keele University
W. Fuller, Keele University
C. M. Martin, Keele University
A. Mahendrasingham, Keele University
D. Chadwick, Keele University
R. P. Cocker, Keele University

Snowbird, UT, USA

12:00 AM

How Good is Your Inspection? How Do You Measure Up?

Section: NDE Reliability Calibration

Ward D. Rummel, D&W Enterprises, Ldt.
George A. Matzkanin, Texas Research Institute

Snowbird, UT, USA

12:00 AM

In-Situ Surface Acoustic Wave Monitoring of Fatigue Crack Initiation and Propagation

Section: Process Control

W. Dai, Ohio State University
J.-Y. Kim, Ohio State University
Stanislav I. Rokhlin, Ohio State University

Snowbird, UT, USA

12:00 AM

Magnetic Flux Leakage Inspection for Moving Steel Sheet

Section: Process Control

Goo Hwa Kim, Research Institute of Industrial Science and Technology
Zhong Soo Lim, Research Institute of Industrial Science and Technology
Eui-Wan Lee, Kyungpook National University

Snowbird, UT, USA

12:00 AM

Measurements of Longitudinal-Wave Velocity in IIW-Type Calibration Blocks

Section: NDE Reliability Calibration

T. P. Lerch, National Institute of Standards and Technology
M. C. Renken, National Institute of Standards and Technology
C. M. Fortunko, National Institute of Standards and Technology

Snowbird, UT, USA

12:00 AM

Non-Intrusive, Ultrasonic Measurement of Fluid Composition

Section: Process Control

W. N. Cobb, University of Denver

Snowbird, UT, USA

12:00 AM

On-Loom, Real-Time, Noncontact Detection of Fabric Defects by Ultrasonic Imaging

Section: Process Control

H.-T. Chien, Argonne National Laboratory
S.-H. Sheen, Argonne National Laboratory
W. P. Lawrence, Argonne National Laboratory
K. Razazian, Argonne National Laboratory
A. C. Raptis, Argonne National Laboratory

Snowbird, UT, USA

12:00 AM

Overview of the ETC POD Methodology

Section: NDE Reliability Calibration

R. Bruce Thompson, Iowa State University

Snowbird, UT, USA

12:00 AM

Process Control Monitoring of Laser Cutting

Section: Process Control

R. D. Huber, Lawrence Livermore National Laboratory
G. H. Thomas, Lawrence Livermore National Laboratory

Snowbird, UT, USA

12:00 AM

Quantitative Assessment of the Detectability of Ceramic Inclusions in Structural Titanium Castings by X-Radiography

Section: NDE Reliability Calibration

Fred R. Child, Lockheed Martin
David H. Phillips, Lockheed Martin
Leonard W. Wise, Lockheed Martin
Ward D. Rummel, D&W Enterprises, Ltd.

Snowbird, UT, USA

12:00 AM

Real-Time Processing of Continuous Doppler Signals for High-Speed Monitoring of Rail Tracks

Section: Process Control

Shi-Chang Wooh, Massachusetts Institute of Technology
C. Casey Kim, Massachusetts Institute of Technology
Coach Wei, Massachusetts Institute of Technology

Snowbird, UT, USA

12:00 AM

The Effects of Microstructure on the Response of Aluminum E-127 Calibration Standards

Section: NDE Reliability Calibration

Y. Guo, Iowa State University
R. Bruce Thompson, Iowa State University
David Kent Rehbein, Iowa State University
Frank J. Margetan, Iowa State University
M. Warchol, Iowa State University

Snowbird, UT, USA

12:00 AM

The NDE of Complex Liquids Containing Suspended Particles

Section: Process Control

R. E. Challis, Keele University
J. S. Tebbutt, Keele University
A. K. Holmes, Keele University

Snowbird, UT, USA

12:00 AM

Thermographic Characterization of Feal Green Sheet

Section: Process Control

Mark K. Hinders, College of William and Mary
Michael L. Watkins, College of William and Mary

Snowbird, UT, USA

12:00 AM

Transfer of POD Performance Capabilities from Simple Shapes to Complex Shapes

Section: NDE Reliability Calibration

Ward D. Rummel, D&W Enterprises, Ldt.

Snowbird, UT, USA

12:00 AM