Degree Type

Dissertation

Date of Award

2005

Degree Name

Doctor of Philosophy

Department

Electrical and Computer Engineering

First Advisor

John Bowler

Abstract

The case-hardening process modifies the near-surface permeability and conductivity of steel, as can be observed through changes in alternating current potential drop (ACPD) along a rod. In order to evaluate case depth of case hardened steel rods, analytical expressions are derived for the alternating current potential drop on the surface of a homogeneous rod, a two-layered and a three-layered rod. By fitting model results to multi-frequency ACPD experimental data, estimates of conductivity, permeability and case depth are found. Although the estimated case depth by the two-layer model is in reasonable agreement with the effective case depth from the hardness profile, it is consistently higher than the effective case depth. This led to the development of the three-layer model. It is anticipated that the new three-layered model will improve the results and thus makes the ACPD method a novel technique in nondestructive measurement of case depth.;Calculations of eddy currents are performed for a two-layer conducting rod of finite length excited by a coaxial circular coil carrying an alternating current. By truncating the solution region to a finite length in the axial direction, the magnetic vector potential can be expressed as a series expansion of orthogonal eigenfunctions instead of as a Fourier integral. Closed-form expressions are derived for the electromagnetic field in the presence of a finite a two-layer rod and conductive tube. The results are in very good agreement with those obtained by using a 2D finite element code.;A new probe technology is designed which has an enhanced flaw detection capability and can reduce inspection time through the use of multiple magnetic field sensing elements. A preliminary Hall array probe has been built and test with eight individual Hall sensor ICs and a racetrack coil. Electronic hardware is developed to interface the probes to an oscilloscope or an eddy current instrument. To achieve high spatial resolution and to limit the overall probe size, high-sensitivity Hall sensor arrays were fabricated directly on a wafer using photolithography techniques and then mounted in their unencapsulated form. The electronic hardware is updated to interface the new probes to a computer.

DOI

https://doi.org/10.31274/rtd-180813-15430

Publisher

Digital Repository @ Iowa State University, http://lib.dr.iastate.edu/

Copyright Owner

Haiyan Sun

Language

en

Proquest ID

AAI3172247

File Format

application/pdf

File Size

128 pages

Share

COinS